maxtop T1 Pro Smart Watch User Manual

maxtop T1 Pro Smart Watch User Manual

ACCESSARIES

• USB Magnetic charging Cable *2
  

• Smart Watch

• User Manual

• Watch band

Overview

Getting Started

Charge Your Watch

Step 1: Insert the USB end of the Charging Cable into a USB adapter , power bank ,or a USB port.

Step 2 : Hold the other end of the Charging Cable to approach the Charging Pins on the back of the watch until they attach magnetically.

Note: The charger specification should not exceed 5V 0.5A -D\ otherwise it will be damaged. If the Charging Cable can not magnetically attach on the Charging Pins of the watch , please change the direction of it.

Wear Your Watch

• To make the data tracking more accurate , we recommend that you wear the watch with one finger’s width below your wrist bone.
• Please make sure the watch fits snugly against your skin and will not move upward or downward during exercise.

Change the Watch Bands

Step 1: Turn over your watch , then press the quick-release lever Inward and gently pull the original watch band away.

Step 2 : Get another band , slide the pin into the notch on the watch , then press the quick-release lever inward and slide the other end of the watch band into place

Step 3 : Release the quick-release lever when the pins on both ends are securely inserted into the notch.

Power On

Long press the power button for 3.4 second to On

IP67 WATERPROOF

Snorkeling
Raining / Snowing| Hot bath
Room temperature
shower / Short swimming|  Long swimming

Touch Navigation

Tap

Tap the screen to select or confirm the option

Swipe/Slide

Swipe vertically to change different Ur time surface

Tap and Hold

Slide horizontally to change to different function surface.

DOWNLOAD/PAIR

Step 1:
Press and hold the power key to start the machine.

Step 2 :
Scan the QR code below with the mobile phone, download and install the app.Or search “MAXTOP” to download and install in Apple store or Android Market.

Compatible system: Android 6.0 and above, Bluetooth 4.0 mobile phone; iPhone IOS 9.0 and above.

Step 3 :
Open the mobile app and select the device to be bound in “add Bracelet”.

1. turn on the Bluetooth of mobile phone;
2. open the “mAxTOP” app and select “click Connect device” to connect your bracelet.

• When pairing please confirm that it is consistent with the Bluetooth address displayed on the bracelet.
• The Bluetooth address can be vie-wed by right sliding to the shutdown interface.

BASIC OPERATION

(slide left and right from time interface to function interface)

Time interface (default interface)

1. Power on: long press the power key to start the machine, and slide the default interface up and down to switch different dials.
2. Shut down : You must switch the UI interface to the ” shut down” interface, then press and hold the power button to shut down .
3. Wake up function: flip the wrist( enter the app “MAXTOP” Click other settings to turn on wake up screen by turn Wrist. At the same time on smart Watch screen. click the setting enter switch to open turn the wrist. Only when the smart Watch and the mobile phone app are turned on at the same time. the smart watch screen off and Wake-up function can be realized.

FUNCTION DESCRIPTION

1. Swipe up from the bottom of the home screen to switch the UI time surface.
2. Swipe left / right on the home screen to check the applications available exercises on your watch.

Function selection interface

Step Counting

Record the number of steps, mileage  and heat consumption of the day, i.e app synchronization data.

Heart rate monitor

Blood pressure monitor

Steep tracker
(test time period: 6:00 p.m. – 10:00 a.m.; ensure that the sleep time period is from 6:00 p.m. to 8:00 a.m. of the next day, the app synchronizes the data, and it is necessary to wear a bracelet to sleep to detect the data)

Note: Only get up before 8 o’clock in the morning and walk for 50-100 steps until it detects that you I have gotten upjhe watch will display sleep data.

Alarm clock

Low battery reminder

Stopwatch

Count down

Manually adjust time span by   or .

Movement

Slide up to exist or pause motion mode.

Information Viewing

FindPhone

Setting

Message settings
(synchronous SMS, calls or other social app messages: ensure that the watch and app must turn on the corresponding switch simultaneously within the message push)

Brightness adjustment

Lock Screen duration

Switch settings
(the following functions can be realized only when both sides of watch end and maxtop app end are opened at the same time)

APP FUNCTION

1. Data panel
   (display steps, sleep data, heart rate, blood pressure, GPS running, etc., as shown in the figure below)

2. Sports

3. GPS movement (the movement mode can be opened manually: click the screen , Enter “map” you can view the motion record)

4. Support 10 sport modes
   
   

How to use sports function

1. Step 1 Select the sport you prefer and tap to enter, it will show Heart ,Calories.
   

2. Step 2 Swipe up the screen to the next page, it will show Step, Distance, Pace;
   

3. Step 3 Swipe up the screen again, you can pause or end the sport. or you can just Swipe down the screen after step you can also pause or end the sport.
   

4. Step 4 When you tap pause, it will stay that interface until you tap resume or end; when you tap end, it will show the detail records of your sport.
   

Setting interface

1. My device
   
   

2. Information reminder
   (The following functions can be realized only when both sides of watch end and “MAXTOP” app end are opened at the same time

Alarm Setting

Multiple alarms clocks can be set.

Sedentary setting

Start, end time and interval can be set manually.

Heart rate alarm

Upper limit of resting heart rate can be set manually.

Turn your wrist and light up the screen

Turn on the flip screen function on both sides of app and watch.

Binding bracelet

(if “bind device” is enabled, the data will be uploaded to the cloud server. If the watch is disconnected from the mobile phone and connected to another mobile phone, the mobile phone can also download the original data)

Switch settings

(About disconnection remind function , In the settings of watch end, you must turn on the “disconnected” switch )

Take a picture

Enter “take a picture” click watch icon to take a picture.

Setting goals

moving targets

PRECAUTIONS

1. Connect Bluetooth:
2. Please make sure that the Bluetooth of the mobile phone is turned on and the bracelet is turned on;
3. When searching for Bluetooth, please make sure that the bracelet has not been bound to other accounts;
4. When searching for Bluetooth, keep the bracelet and the phone as close as possible.
5. If other software such as mobile phone manager has been installed in the user’s mobile phone, in order to ensure the normal operation of the background APP, please turn on the message push and allow the background operation permission on the mobile phone, otherwise the message cannot be pushed.
6. Charging requirements: Use a charger with a specification of 5V 0.5-1A for charging. If you don’ t use it for a long time, please turn it off and keep it charged once a month.
7. In order to ensure the accuracy of the test data, after entering the blood pressure test mode, please keep your body relaxed and quiet during the test. Please refrain from talking during the test. (This function provides a data reference for observing the blood pressure changes before and after the human body exercise, not for medical treatment).
   • Do not keep the magnetic stripe card (such as bank card, telephone card, etc.) in contact with the device for a long time, otherwise the magnetic stripe card may be damaged by the magnetic field.
   • Do not disassemble or modify the equipment and accessories without authorization, otherwise the equipment and accessories will no longer be covered by our company’s warranty. Please contact the MAXTOP customer service center if the equipment fails.
   • If the device collides with a hard object or the device receives a strong impact from the outside that causes the screen part to be broken, do not touch or try to remove the broken part. Please stop using it immediately and contact the MAXTOP customer service center in time. Environmental protection
   • Do not dispose of this device and its accessories as ordinary household garbage.
   • Please abide by local laws and regulations regarding the disposal of this device and its accessories, and support recycle.

Instagram

MAXTOP US

MAXTOP APP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>