Ridetofly SU01 Stand Up Paddle Board User Manual

Ridetofly SU01 Stand Up Paddle Board User Manual

Inflate the surfboard

1. Connect the trachea to the “INFLATE” interface of the pump. (Figure 1)
   

2. Open the surfboard air valve. (Figure 2)
   

3. Connect the air pipe of the pump to the air valve of the surfboard and tighten it. (Figure 3)
   

4. Pump up the surfboard, and stop pumping up when the barometer shows that the air pressure reaches 12-15PSI. (Figure 4)
   

5. Remove the air tube from the kayak and cover the air valve. (Figure 5)
   
   

WARNINGS

PLEASE READ THIS MANUAL CAREFULLY, BEFORE INFLATING, ASSEMBLING OR USING YOUR SUP.

• Stay up to date with current and future weather conditions, including potentially dangerous conditions. Never go paddling in strong or offshore winds. Never go paddling in an outgoing tide or strong tidal currents.

• Your board can expand and over-inflate in very hot temperatures. Please check the air pressure and deflate your board as necessary.

• For your own safety please attach the safety leash provided to your ankle at all times.

• Please always wear a life jacket or other personal flotation equipment.

• Please pack and store the SUP in the backpack provided, in a cool dry place and Avoid direct sunlight.

• Please ensure that no water gets inside of your SUP as this can severely damage the board. Drain any water and dry throughly before re-attaching the valve and inflating.

• Store your mobile phone in the waterproof phone bag provided. Also, consider packing a whistle or flashlight in case of an emergency.

• Clean and check your board after each use. Rinse your board with fresh water thoroughly. Remove any
  sand, dirty, or salt water build up. Use a mild soap if needed, and avoid any heavy chemical-based
  products. Make sure your board completely dry before storage.

• A repair kit is provided, with extra patches and a valve tightening tool. You can use this tool to tighten the valve to prevent any air leaks.

INSTALL PADDLE

How to install single and double propellers

Double-headed paddle

1. Open the knob at the propeller handle (Figure   6) , and take out the propeller handle.
   

2. Install the two paddle boards on the two ends of the middle iron rod (Figure 7, 8).
   
   

single-head propeller

1. Open the knob on the propeller handle (Figure 6) , pull out the propeller to a proper length, press down the knob to fix the propeller.
2. Install a paddle board with fixing holes on the other end of the iron rod (Figure 8), and clamp the positioning post of the iron rod in the positioning hole of the paddle board.

INSTALL FIN

TIP: Before installing the fin, please ensure the fin box slot is clean and free of sand and grit.

Side the fin into the fin box.
Make sure fin and card slot of fin box in the same position.

PACKAGE CONTENT

• 1* Seat
• 1* Single/double-headed paddle
• 1° Foot strap
• 1* Double-acting hand pump
• 2* Mobile phone waterproof bag
• 2 Glasses rope
• 1* Waterproof storage bag
• 1* Backpack
• 1* Repair bucket
• 1* Wrench
• 1* Removeable Fin

Customer Support

Go to Your Orders, find your

We provided 12-month warranty. order in list, and click get product support. (The warranty period is measured starting on the date of purchase by the original consumer purchaser.)

Receive our Ridetofly products

Satisfied

Yes
No

Support us by sharing your shopping experience with our Ridetofly brand
Contact us: ridetofly@ridevolo.com, For an RMA request

Problem with the order? Please email us: ridetofly@ridevolo.com give us a change to help you fistly.

Do you love your new Ridetofly product? Help others find it by support us by sharing your shopping experience with our Ridetofly brand.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>