ZM1501 Metal Food Grinder Attachment for AMZCHEF Slow Juicer Installation Guide
- June 14, 2024
- amzchef
Table of Contents
ZM1501 Metal Food Grinder Attachment for AMZCHEF Slow Juicer
INSTALLATION
- Step 1: Insert the auger.
- Step 2: Mount the cutting blade on the front of the auger. The flat, sharpened end of the cutting blade MUST be facing OUT.
- Step 3: Mount the grinding plate in front of the cutting blade and make sure the tabs on the sides fit into the slots on the sides of the grinding head.
- Step 4: Turn and tighten the head-locking screw cap.
- Step 5: Install the accessories to the original juicer and install the tray.
Sausage stuffing tubes assembly steps – for minced meat
- Step 1: Insert the auger.
- Step 2: Install the adaptor ring, make sure both sides are tight
- Step 3: Insert the stuffing tube into and through the back of the adapter ring and push it in until it is snug, Screw the head locking screw cap onto the grinding head as shown.
- Step 4: Install the accessories to the original juicer and install the tray.
Sausage stuffing tubes assembly steps – for chopped meat
- Step 1: Insert the auger.
- Step 2: Mount the cutting blade on the front of the auger. The flat, sharpened end of the cutting blade MUST be facing OUT.
- Step 3: Mount the grinding plate in front of the cutting blade and make sure the tabs on the sides fit into the slots on the sides of the grinding head.
- Step 4: Insert the stuffing tube and screw the head locking screw cap onto the grinding head as shown.
- Steps: Install the accessories to the original juicer and install the tray.
Cleaning tips
- Do not put it in the dishwasher.
- Do not use water over S0°C to clean.
- After use, please soak in water for a few minutes, and then rinse clean.
- The cleaned products should be air-dried in time and kept in a dry place.
Scan the QR code to watch the video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>