GEEKERA T3 3 in 1 Wireless Charger Dock Station User Manual

GEEKERA T3 3 in 1 Wireless Charger Dock Station

How to Use

Specifications

• Input: 9V-2A
• Phone Output: 1 OW Max
• Earbuds Output: SW Max
• Watch Output: 3W Max
• Input Interface: USB-C

Compatible Devices

1. Phone:

2. iPhone 14/ 14 Plus/ 14 Pro/ 14 Pro Max/ 13/ 13 Pro/ 13 Pro Max/ 12/ 12 Pro/12Pro Max/11/11 Plus/11 Pro/11 Pro Max/SE/XJXR/XS/XS Max/8/8 Plus

3. Samsung Galaxy 522 Ultra/ 522/ Z Flip3/ 521 Ultra/ S21/ Note 20 Ultra/ 520/ 520+/ 520 Ultra/ Z Flip/ Note10 (SG)/ Note1 0+ {SG)/ Fold/ Fold SG/ S10 E/ 5 10/ 510+/ Note9/ 59/ 59+/ Note 8/ 58/ 58+/ 57/ 57+/ S7 Edge (Android 6.0 Above)

4. Watch:
   Apple Watch Series 2/ 3/ 415/ SE/ 6/ 7/ SE 2nd Generation/ 8/ Ultra

5. TWS Earbuds:
   AirPods Pro 2nd Generation/ AirPods 3/ AirPods Pro MagSafe/ AirPods 2nd Generation (Model: A1938)

About Indicator Lights

1. Standby State:
   When the wireless charger is connected to power, the green lights will flash for 3 seconds in total and then turn off.

2. Charging State:
   When the phone, earbuds or watch is charged, the corresponding green light will turn on, and then turn off after 20 seconds.

3. Fault Detection:
   When the phone, earbuds or watch is abnormally charged, the corresponding green light will keep flashing.

4. Fully Charged State:
   When your devices are fully charged, there is no indicator light display.

How to Solve Abnormal Charging

1. Confirm whether your mobile phone has wireless charging function before live.
2. Check whether the phone deviates from the wireless inductive charging area of the charger.
3. Check whether a non-metallic protective case is used for charging mobile phones (Note: The thickness of the protective case is recommended not to exceed Smm/0.2in).
4. When there are metal objects on the charging area, the wireless charger will automatically detect them and provide power off protection.
5. When the temperature of the wireless charger is too high, it will automatically start the protection. Please unplug the power supply first and use the charger after it recovers the temperature.
6. When the abnormal charging occurs, please restart your device. Wait for the charger to cool down, and try to remove the protective case of your device to charge.
7. If the size of your phone is over 6.7 inches, please charge it in landscape.
8. For better charging experience, please upgrade the software of your phone, watch or earbuds to the latest version.

Safety Precautions

1. DO NOT place or use the product in the environment of high temperature, humidity, strong static electricity and strong magnetic field.
2. DO NOT plug and unplug electrical appliances with wet hands.
3. Keep out of reach of infants and children.
4. DO NOT use the product if it is contaminated with water or dirt.
5. Non-professional personnel are not allowed to modify, repair or disassemble the product without authorization.
6. DO NOT use the product in excess of its output rating to avoid fire or injury to persons.
7. DO NOT expose the product to rain or snow.
8. Only use the certified QC 3.0 1 SW Fast Charging Wall Adapter to power the product.
9. DO NOT plug the product into computer USB ports or any other non certified USB ports.
10. Please align the center area of your phone with the”+” sign of the wireless charger while charging.
11. Make sure to disconnect the product from power before cleaning.
12. It is normal and safe that you hear humming noise when you’re very close to the wireless charger.
13. Please remove your phone case before charging if the thickness> 5mm/0.2in.

FAQs

1. Q: What is the charging interface of the product?
   A: It is a Type-C charging interface (Note: A USB-A to USB-C cable is included).

2. Q: Why does the product heat up?
   A: It is normal if the product heats up slightly during charging, which won’t affect its safety and service life.

3. Q: What safety protections does this product have?
   A: It has overcurrent protection, overvoltage protection, short circuit protection, overheating protection, and more.

Warranty Statement

The warranty period of this product is 24 months. From the date of purchase, you’ll enjoy a free warranty within the warranty period with valid documents.
Note:
The following conditions are not covered by the warranty:

1. Unable to provide formal purchase certificate.
2. Damage caused by man-made or irresistible factors.
3. Accidental damage. (Misuse, abuse, or neglect)
4. Improper repair or alteration by unauthorized persons.
5. Operation without following the manual’s instructions.
   *The company reserves the right to make the final interpretation of the above-mentioned after-sales terms and restrictions.

After-Sales Service

If you have any questions or concerns, feel free to contact us via Amazon:

1. Go to your “Orders”.
2. Find your order in the list.
3. Click “Get help with order”.
4. Select the problem with your order.
5. Choose the “Subject” from the displayed list.
6. Contact the seller.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radionic technician for help.

FCC RF Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated within minimum distance of 20cmn.9in between the radiator and your body.

IC Caution

Radio Standards Specification RSS-Gen, Issue 5
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with the minimum distance of 10cm/3.9in between the radiator and your body.

CE Caution

This device was tested for operations. To comply with RF exposure requirements, a minimum separation distance of 20cm/7.9in must be maintained between the user’s body and the handset including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of European Union.
The device complies with RF specifications when used at 20cmn .9in from your body.

UKCA Caution
Manufacturer’s Name: Shenzhen Yifeng Intelligent Technology Co.,Ltd. Product Name: 3-in-1 Wireless Charging Station
Model number: T3
Operating Temperature: 0°C-40°C

This device was tested for typical mobile type device operations. To comply with RF exposure requirements, a minimum separation distance of 10cm/3.9in must be maintained between the user’s body and the handset, including the antenna. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of UK Radio regulations requirements RER2017(S.l.2017/1206). All essential radio test suites have been carried out.

1. The device complies with RF specifications when used at 1 Ocm/3.9in from your body.
2. This product can be used across England, Wales, Scotland and EU member states.

110kHz-205kHz

|

43.4dBdA/m @3m

|

973dBpA/m

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>