GEEKERA M15 2-in-1 Magnetic Wireless Charging Station User Manual

M15 2-in-1 Magnetic Wireless Charging Station

Product Information: 2-in-1 Magnetic Wireless Charging Station

The 2-in-1 Magnetic Wireless Charging Station is a wireless charging pad that can charge compatible mobile phones and TWS headsets wirelessly. The model number of this product is M15. It has a USB-C input interface and supports an input of 12V=2A. The output of the charging pad for compatible mobile phones is 7.5W Max and for TWS headsets is 5W Max. The product comes with safety precautions, a product diagram, compatible devices, usage instructions, information about the indicator light, and Q&A for troubleshooting.

Safety Precautions

• Use this product indoors or in a dry environment.
• DO NOT place or use the product in an environment of high temperature, humidity, strong static electricity, and strong magnetic fields.
• DO NOT plug and unplug electrical appliances with a wet hand.
• Keep out of reach of infants and children.
• DO NOT use this product if it is contaminated with water or dirt.
• Non-professional personnel are not allowed to open and repair this product without authorization.

Product Diagram
The product diagram shows four areas as follows:

1. Charging area for compatible mobile phones
2. Charging area for compatible TWS headsets
3. Indicator light
4. USB-C input interface

Compatible Devices
The 2-in-1 Magnetic Wireless Charging Station is compatible with the following devices:

1. iPhone 13Pro Max/13Pro/13/13mini/12Pro Max/12Pro/12/12mini
2. AirPods Pro MagSafe/AirPods 3

How to Use

1. Connect the power and wait for the device to enter the standby state.
2. Place the compatible mobile phone on the charging area for wireless charging.
3. Place the compatible TWS headset on the charging area for wireless charging.

About the Indicator Light
The indicator light shows different colors and flashing modes to indicate the charging status of the compatible devices. The light will turn off automatically when the device is fully charged.

How to Solve Abnormal Charging
If abnormal charging occurs, try the following:

1. Check if the mobile phone or TWS headset is compatible with the charging pad.
2. Remove any phone case or cover that may interfere with charging.
3. Make sure the charging pad is connected to a stable power source.
4. Remove any foreign objects from the charging area.

Q & A

Q: Why is there heat generation during the charging process of wireless charging inductive products?
A: In the process of charging, there will be a certain loss of magnetoelectric conversion that will be converted into heat, causing the mobile phone and charger to generate heat, which is normal. Suggestions:

1. When the device is fully charged, remove it from the wireless charging pad in time.
2. Never let the background software run when charging the mobile phone.

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Product Safety Precautions

• Use this product indoors or in a dry environment.
• DO NOT place or use the product in an environment of high temperature, humidity, strong static electricity, and strong magnetic fields.
• DO NOT plug and unplug electrical appliances with a wet hand.
• Keep out of reach of infants and children.
• DO NOT use this product if it is contaminated with water or dirt.
• Non-professional personnel are not allowed to open and repair this product without authorization.

Product Diagram

1. Input Interface
2. Mobile Phone/Headphone Charging Position
3. Mobile Phone/Headphone Charging Position
4. Indicator Light

Specifications

• Input: 12V=2A

• 1: Output:
  Phone 7.5W Max /TWS 5W Max
  Phone 7.5W Max /TWS 5W Max

• 2: Input interface: USB-C

Compatible Devices

1. iPhone 13Pro Max/13Pro/13/13mini/12Pro Max/12Pro/12/12mini
2. AirPods Pro MagSafe/AirPods 3

How to Use

1. Power connected, the device enters the standby state.
2. Put the compatible mobile phone on the corresponding charging area for wireless charging.
3. Put the compatible TWS headset on the corresponding charging area for wireless charging.

About the Indicator Light

1. When the power is turned on, the blue light will be on (off within 2 seconds).
2. When your phone or headset are being charged, the blue light will be on (off after 20 seconds).
3. When your device is fully charged, the indicator light will turn off.
4. When two devices are being charged at the same time, the blue light will be on to indicate that there are two devices in the charging state.
5. When the wireless charger output is abnormally charged or foreign objects are detected, the blue light will keep flashing.

How to Solve Abnormal Charging

1. Please confirm whether this wireless charging pad is compatible with your mobile phone before use.
2. Please check whether your mobile phone deviates from the wireless inductive charging area of the charging pad.
3. Please confirm whether the protective case is non-metallic, and its thickness is recommended not to exceed 5mm/0.2in.
4. When there are metal objects on the charging area, the wireless charging pad will automatically identify them and provide power off protection.
5. When the temperature of the wireless charging pad is too high,
   the high temperature protection function will automatically work. Please unplug the power supply first and start reuse after the charger cools down.

Q & A

• Q: Why is there heat generation during the charging process of wireless charging inductive products?
  A: In the process of charging, there will be a certain loss of magnetoelectric conversion that will be converted into heat, causing the mobile phone and charger to generate heat, which is normal. Suggestions:

1. When the device is fully charged, remove it from the wireless charging pad in time.
2. Never let the background software run when charging the mobile phone.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm/7.9in between the radiator and your body: Only use the supplied antenna.

This device was tested for typical mobile type device operations. To comply with RF exposure requirements, a minimum separation distance of 20cm/7.9in must be maintained between the user’s body and the handset, including the antenna. Third party belt clips, holster, and similar accessories used by this device should not contain any metallic components. Mobile type device accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive (RED) SI 2017 No. 1206. All essential radio test suites have been carried out.

1. The device complies with RF specifications when the device used at 20cm/7.9in from your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>