GEEKERA M6 3 in 1 Magnetic Wireless Charging Station User Manual
- June 11, 2024
- GEEKERA
Table of Contents
GEEKERA M6 3 in 1 Magnetic Wireless Charging Station
Preface
Thank you for purchasing the Our 3-in-1 Magnetic Wireless Charger (M6). Read this manual carefully before use, and retain it for future reference.
Specification
- Product interface: type-C
- Material: ABS+Stainless steel
- Input : 9V=2A 12V=1.5A
- Apple watch output power: 3W(Max)
- Airpods charging power: 5W(Max)
- Apple phone charging power: 7.5W(Max)
- Product color: black/white
Compatible Devices:
- iPhone 13/12 mini/Pro/Promax
- Apple Watch 7/6/SE/5/4/3/2.
- AirPods 2/3/Pro
Product Overview
Product display
IMPORTANT SAFETY INSTRUCTIONS
Before Using the unit, please read the user manual carefully.
- Do not store the device in a high-temperature environment, including heat caused by intense sunlight or other forms of heat.
- Do not place the device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F (100 C) may cause an explosion.
- Do not use the wireless charger in excess of its output rating. Overloading outputs above their rating may result in a risk of fire or injury to persons.
- Do not expose the wireless charger to rain or snow.
- Do not modify, repair or disassemble the unit. If you need to do so, please contact the manufacturer first.
- Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.
Q&A
When I place the phone on the charger, it starts charging, but after a few minutes it stops and the light starts to flash. Why?
- Make sure your device supports the Qi wireless charging function before using this wireless charger.
- Check if you are using the QC 3.0 adapter to power our wireless charger, or test with another adapter.
- Test with other USB cables.
- Check whether your device’s case contains metal. Magnetic and metal attachments will cause an LED flash and prevent charging. If the phone has a case, please make sure the thickness is less than 0.2 in or remove the case before charging.
- Please place the phone correctly. If the phone is placed in the incorrect position, it will affect charging.
- Restart your phone.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm between the radiator and your body: Use only the supplied antenna. This device was tested for typical mobile-type device operations. To comply with R F exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. mobile type device accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna. This device in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive (RED) SI 2017 No. 1206. All essential radio test suites have been carried out. 1. The device complies with RF specifications when the device is used at 20cm from your body
Why can’t I charge my AirPods 2?
- Make sure your device supports the wireless charging function.
- AirPods 2 is divided into two series; one supports wireless charging and the other cannot support wireless charging.
- When your AirPods 2 has an indicator on the outside of the shell, it can support wireless charging. When your AirPods 2’s indicator is inside the clamshell, it can’t support wireless charging.
- You can confirm by contacting the customer service.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>