TECKNET M106 Wireless Silent Mouse User Manual
- June 14, 2024
- TECKNET
Table of Contents
Cordless Mouse
Product Layout
Technical Specifications
Number of Buttons: | 6 |
---|---|
Operating Frequency: | 2.4GHz |
Receiver Interface: | USB version 2.0 |
Battery Type: | |
Operating Voltage: | 3.0V |
Operating Current: | <10mA |
Standby Current: | < 0.8mA |
Sleep Current: | 0.05mA |
Transmission Power: | 1.5dBm |
Package Contents
1 M106 Wieless Mouse
1 USB Nano Receiver
1 User Manual
Note: Batteries are NOT included
System Requirements
To use this mouse, your computer must meet the following hardware requirements
and run one of the operating systems listed below.
Hardware
- PC with a Pentium processor or equivalent AMD processors
- usb 2.0
Operating System
- Windows 2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10
Note: The scroll wheel only works under the operating systems listed above, If you use the mouse under a difleent operating system, the mouse may either not work or lose its enhanced features.
Instructions Battery Installation
The M106 optical mouse uses two AA batteries (not included).
- Open the battery cover.
- Insert the batteries into the compartment, ensuring they correspond with the polarity marking.
- Put the battery cover back.
- Turn on the mouse by turning the power switch from OFF to ON. This is underneath the mouse. The power indicator LED at the top of the mouse will flash.
Note: Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.
Receiver Connection
Take out the USB Nano receiver from the mouse and plug it into an open USB
port on your computer. The Plug & Play function of your system will detect
that a new device has been connected and install it automatically.
Note: The receiver is stored near the battery compartment.
Intelligent Power Saving (IPS)
The mouse is equipped with an Intelligent Power Saving (IPS) function.
- When the USB Nano receiver is disconnected or the PC is switched off, the mouse will be switched off automatically to save power.
- When your mouse is not operated for 10 seconds, it will automatically drop to the first level of IPS. To wake the mouse, click any button.
- When your mouse is not operated for 8 minutes, it will automatically drop to the second level of IPS. To wake the mouse, click any button.
DPI Switch
Press the DPI button to cycle through 5 DPI levels
Silent Click Buttons
Help get away from the annoyance of loud dick mouse buttons.
Low Battery Power Indicator
The mouse is equipped with low power indicator. When the battery power gets
low during the period of use, the indicator under the scroll wheel will flash.
Please replace the battery.
Note: We recommend you use AA alkaline dry cell batteries.
Reconnection
There is a connection code for this Mouse. High temperatures, electro-
magnetic fields or vibration may influence the signal and the Mouse may need
to be reconnected. Both Mouse and Nano Receiver have a built-in code and one
Mouse can be connected to one receiver, or several Mice to one Nano Receiver.
The Mouse and
Nano Receiver may need to be reconnected if subjected to high temperature,
electromag- netic fields or strong vibrations.
- Ensure the battery voltage is correct; if the voltage is low, replace the batteries.
- Press the right button and middle button (under the scroll wheel) simultaneously (Do not release both buttons until you have completed step 3).
- Plug the USB Nano receiver into a free USB port of your computer within 15 seconds.
- Then release both buttons.
Attention
- To maximize battery life, it is recommended to use the mouse on a white or light coloured surface.
- If not used, the mouse will drop into auto-sleeping mode within 3 seconds. Press any key or scroll wheel to activate the mouse.
- Do not use the mouse on a glass or mirrored surface, as these surfaces will cause the mouse to fail temporarily.
- The mouse might nol work smoothly on some special surfaces, such as smooth, dark or black, reflecting and 3D mouse pads surfaces,
- Avoid using the mouse on a metal surface. Metals, such as iron, aluminium or copper, shield the radio frequency transmission and may slow down the mouse presenters fesponse time or cause the mouse to fall temporarily.
- If your PC has 8 metal case that contains aluminium or magnesium, use the mouse to the side. The display panel may interfere with the radio frequency signal if you use the mouse directly in front of the PC.
FAQ
-
What should | do if the mouse does not work?
• Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each batlery must match the positive (+) and negative (-) markings in the battery housing.
• Make sure the batteries are not discharged.
• Please try to remove the batteries, and reinstall the batteries again.
• Verify that your computer’s power management features are turned off. *Check the Nano recetver’s USB connector is firmly attached to the USB port of your computer. -
The USB Nano recetver is recognized by Windows (2000. 2003, XP, Vista, Win7, Win8, Win8.1, Win10) but the cursor does not move?
• Check whether the low power indicator on the top of the mouse lights up. If the sensor lights up, itis likely that the batteries are discharged. Please replace them.
• If reptacing the battenes does not help, it is likely that the mouse is not connected to the receiver. Please try reconnection and ensure that the mouse is within the optimal operational working distance (1.5m) from its USB Nano receiver.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.
- SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire or explosion may occur.
- For proper insertion, please observe polarity indicators ( +/-).
- Remove the batteries if the product is not going to be used for a long period of time.
- Do not place the product in or near any inflammable, explosive or hazardous object.
- Do not place in or near water, rain, excess moisture or extreme heat.
- Do not operate the product with damaged cord or plug.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
- To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.
Limited 12-Month Warranty
What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants
to the original purchaser of this TECKNET product that the product shall be
free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.
What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of
charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided
to Unichain for inspection upon Unichain’s request at the sole expense of the
purchaser, or if Unichain determines that the TECKNET product has been
improperly installed, altered in any way, or tampered with. The TECKNET
Product Warranty does not protect against acts of God such as flood,
earthquake, lightning, war, vandalism, theft. normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (e.g. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TECKNET website or email ssupport
@teckneton-line.com for more information.
To extend the warranty period, please visit TECKNET website and register your
TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.Household
user should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contact. This product should not be mixed with
other commercial wastes for disposal.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type
M106 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://eu.tecknetonline.com/
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>