TOPPING D10 Balanced Mini USB DAC User Manual
- June 14, 2024
- TOPPING
Table of Contents
- What is the difference from D10s
- Compatible with DSD256 and PCM384
- Automatic power on/off
- Plug and Play under multiple OS
- Audio format and sampling rate indicator
- Connect to active speakers
- Connect to power/headphone amp
- USB interface application
- SPEC
- Contents list
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
D10 Balanced
COMPACT SIZE
ULT PA DEDE OMANCE
Balanced USB DAC 
What is the difference from D10s
For single-ended analog output, choose D10s; for balanced TRS/XLR output, choose D10 Balanced. Please note that the balanced output of D10 Balanced does not support any adapter to convert to single-ended.
New design brings better performance
SINAD
119dB @1kHz
Dynamic range
125dB@1kHz
ESS SABRE ES9038Q2M HIFI DAC
Compatible with DSD256 and PCM384
D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native
Automatic power on/off
D10 Balanced will synchronously power on/off with PC.
Plug and Play under multiple OS
D10 Balanced has a wide range of compatibility: Windows (above Win10), MAC,
and Linux can all be plug and play.
Only for ASIO applications unider Windows need to install the driver and set
it up. (Android and IOS not compatible due to insufficient OTG current)
Professional applications are also competent
D10 Balanced supports professional ASIO applications. When using ASIO in MAC
or Linux, it can be set in the music playback software; when using ASIO with
Windows, you can use the customized driver from The
sycon. 
Audio format and sampling rate indicator
D10 Balanced can accurately indicate the audio format (PCM or DSD) and
sampling rate of the playing music.
Orange LED is soft and not dazzling even at night. 
DSD playback only displays the sampling rate in ASIO mode
Connect to active speakers
Connect the output of D 10 Balanced to your active speakers, then send better
sound directly into the speakers in a more professional way.
Connect to power/headphone amp
You can connect D10 Balanced to your amplifier/head phone amplifier’s input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolution files.
USB interface application
If you already have a better DAG, you can connect D10 Balanced’s coaxial
/optical output to your DAC, then D10 Balanced serve as a USB bridge.*
*D10 Balanced could output no higher than PCM 24bit 192kHz or DSD Dop64 when served as USB bridge
SPEC
| Measured | 10.3cm x 14.6cm x 3.7cm |
|---|---|
| Weight | 340g |
| Power input | DC5V / 0.5A(USB power supply) |
| Signal input | USB |
| Line Out output | 6.35mm TRS (Note: No single-ended output) |
| Digital output | OPT/COAX |
| Display | LED |
| USB IN | 44.1kHz-384kHz/16Bit-32Bit |
DSD64-DSD128(Dop)
DSD64-DSD256(Native)
OPT/COAX OUT| 44.1kHz-192kHz/16Bit-24Bit
DSD64 (Dop)
D10 Balanced Decoding parameters (USB In©96kHz)
THD+N@1kHz A-wt| <0.00012%
THD| <0.00015% @20-20kHz
SNR@lkHz A-wt| 125dB
Dynamic Range@l kHz A-wt| 125dB
Frequency Response| 20Hz-20kHz(±0.2dB)
Output Level| 4.2Vrms @OdBFS
Noise| <2.4uVrms
Channel Crosstalk@l kHz| -141dB
Channel Balance| 0.3dB
Output Impedance| 880
Output DC| Differential| <1mV
Common| <70mV
Contents list
- D10 Balanced
- 6.35m m TRS to XLR adapter
- USB cable
- User manual
- Warranty card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>