BroadLink SP4L-UK Smart Plug Instruction Manual

Smart Plug
SP4L-UK

Overview

Indications

added).
Flashes intermittently| Device is in AP (Neap) Setup mode (waiting to be added).
Flashes slowly then off| Device is being set up and added to network
Flashes slowly continuously| Device is failed to connect to network or disconnected from network
ON/OFF| Device is switched on/off

• Reset for AP (NoOAPP) Setup
  When the device is in any conditions, press and hold the power (reset) button for 5s until the LED indicator flashes intermittently.
  DO NOT hold longer than 10s, otherwise it will go to Smart Setup mode.

• Reset for Smart Setup
  When the device is in any conditions, press and hold the power (reset) button for 10s until the LED indicator flashes quickly.

Troubleshooting

1. I couldn’t get popup landing page, what can I do?
   After your phone is connected to “Broad Link WiFi Device” wireless network, open your phone web browser and input the address: “noapp.com”.

2. I couldn’t find home Wi-Fi network in landing page, what can I do?
   You may not have 2.4GHz Wi-Fi network in your home, check the Wi-Fi settings from your router manufacturer.

3. I couldn’t get verification code by email, what can I  do?
   Check your spam in email. If you are using email client, please try to check your email on webpage.

I important notices

• For indoor use in dry environment only.
• DO NOT connect to appliances before the device is added in App.

FCC radiation exposure statement

• Contains FCC ID: 2ACDZ-BL3335-P
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>