TOPPING HS02 USB2.0 Audio Isolator Instruction Manual
- June 14, 2024
- TOPPING
Table of Contents
HSO2
USB2.0 High Performance
AUDIO ISOLATOR
High Performance/high compatibility/Low latency Isolation withstands up to 1500VDC
Fully Isolated Design
The HS02 has a fully isolated design, which does not introduce new interference when the auxiliary power supply is used while the audio signal is isolated from ground loop interference. Say goodbye to ground loop and hum.
Note: The toggle switch allows you to select different functions.
Note: The color marked above is subject to the real thing.
Switching between two interfaces
The HS02 has two input interfaces (including a USB-B and a Type-C) and two
output interfaces (including a USB-A and a Type-C), either of which can be
selected by an input switch or an output switch.
Note: Input is used to connect to computer, output is used to connect to
USB device.
Excellent and Powerful
High speed is also highly compatible
HS02 supports automatic identification of USB2.0 transmission at low speed, full speed, and high speed. The powerful transmission capability is compatible with high resolution audio such as PCM32bit/768kHz and DSD512Native.
Ultra Low Latency
The Latency is only 0.073pus, which fully meets hifi and professional applications’ needs.
Effectively eliminate the noise introduced by the ground loop
The noise can be reduced by up to 50dB in real world measurement.
Connect
- For USB devices which are powered via the USB port, HS02 requires 5V power supply to provide sufficient power for reliable operation of the USB device. Please connect the power supply to the other input jack of the HS02.
*We recommend to connect the HS02 directly at the PC (USB root port instead of an USB hub).
|
---|---
|
|
Contents list
- HS02
- USB cable
- User manual
- Warranty card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>