anko 43189571 LED String Light 3M WiFi User Manual
- June 4, 2024
- Anko
Table of Contents
Anko 43189571 LED String Light 3M WiFi
Please take a minute to read the below information on setting up this device.
The smart strip lights can work with both Amazon Alexa and Google Assistant.
After the smart string lights have been installed they will need to be paired
with an APP “Tuya Smart” downloadable from Google Play or the Apple store.
Once the Tuya Smart APP is installed, it will then need to be linked with
either Amazon Alexa or Google Assistant account to activate the voice control
function. This user manual consists of three parts. Part one is fundamental
set-up, and parts two and three are alternative device setups. If you use
Amazon Alexa for voice control, please follow the instructions in parts one
and two. If you use Google Assistant for voice control, please skip part two,
and follow the instructions on parts one and three.
Part One: Pairing the smart strip lights to the “Tuya Smart” App
Part Two: Controlling the smart strip lights with Amazon Alexa
Part Three: Controlling smart strip lights with Google Assistant
Specification
- lnput: 220V-240V – 50/60Hz (AC adapter XY12J-1201000H-AW)
- Output: d.c.12V 1A
- Dimension: 3M
INSTALLATION
Before adhering strip light dean, the surface of the area you will be placing the lights on. II I, r=mmondod to apply your strip lights on smooth sblbl• surfaces. It should not be placed on rough. textured or painted wall surfaces or any surfaces that can bend or move.
- Unroll the strip light before usage.
- Connect to the APP properly before installation.
- For standalone use only. Do not connect to any more strip lights.
- Luminaires are not suitable for covering with thermally insulating material.
- Do not block the controller with metal objects.
- There’s a built-in microphone inside the controller, please place your music-playing device near the controller for better results.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Where breakage or damage to lamps occurs, the chain must not be used/energized but disposed of safely
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- For indoor use only.
- Aim at the receiver, the range of the remote control is 5M.
- The control gear was used with 43189571/43189588 only.
Product Instructions
-
Cleaning the installation surface.
-
Sticking to the installation surface.
-
Plugging into the pocket,
-
One press the button to power ON/OFF the lights with the Flights powered on. Press and hold the button for about 6 seconds to enter the configuration mode.
Part One- How to pair the smart strip light to Tuya Smart App?
Install the Tuya Smart App to control the smart strip light. Please download and install the app by -
Scan below QR code OR Search “Tuya Smart” in Apple Store or Google Play. Create an account on Tuya Smart and log in.
Note: You will need to enter these account details for Alexa or Gocglc A&sistant App pairing later
- Add the smart strip light to Tuya Smart App
- The smart Wi-Fi devices only supports 2.4GHz. Make sure your mobile device connected to your home 2.4Ghz WiFi network. Please refer to your WiFi router setup guide.
- Tap “+ button on top right corner to add device, then tap “strip lights (BLE+Wi-Fi) ” to enter.
- Press and hold the middle button of the controller for 6 seconds, the strip light will fast flash in red color, this will then enter Quick Connection Mode. Please make sure the smart strip light is on standby. (The strip light in red color and flash is 2 times per second).
Manual Control by 3 Buttons
- Scene mode.
- Press one time ON/OFF;
- Press 6 seconds to reset, and start to connect the network.
- Music mode.
- Enter your Wi-Fi SSID name and Wi-Fi password then tap “Next”.
- Enable your mobile device’s Bluetooth connection for easy setup mode.
- Wait till it is successfully connected.
Give a name to the device. A simple name is recommended for easier voice recognition with Alexa or Google Assistant. The name given to the device will be the same for voice control on Alexa or Google Assistant. For example, if the device is named “Smart LED strip light ” on this user manual, and the named device will be shown on the app homepage.
How to Control the smart strip light by Tuya Smart App
- Light color mode: you can choose the light color and adjust the brightness and saturability.
- Scene mode: custom scene and recommend scene to choose.
For the custom scene, there are static/flash/breath three modes to choose from, you can DIY light color, brightness, and speed of the light. For the recommended scene, there are various kinds of preset scenes that can select.
-
Music mode: There are two music active ways to choose. The strip light function Will changed with the music.
-
Local mode: there’s a built-in microphone inside the controller, please place your music playing device near the controller for better results. You can adjust the sensitivity, and choose the recommended scene or DIY rhythm scene by yourself.
-
App mode : place your music-playing device near the phone mic for better results.
Noted: the music active mode will close when you close the phone screen. -
Set up your own schedule and timer of the light.
Part Two-How to control the smart light with Amazon Alexa. Please make sure
that your Alexa app is connected to Echo, and both work well under your WIFl
network.
Step A: Log in to your Alexa App, tap the top left corner, and tap
“Skills and Games”
Step B: Type “Tuya Smart”, find “Tuya Smart” from the search result, and tap it to enable the skill.
Step C: Enter your Tuya Smart App account and password. Tap “Link Now”, then Tuya Smart will be linked successfully.
- Step D: When the named strip light is pared to Alexa from Tuya Smart, it will show on the device page (see the “Smart LED strip light”example)
- Step E: Now you can control the same strip light with Alexa App on the setting page.
- Step F: You can also voice control the smart strip light with Alexa by giving voice commands “Alexa, turn on device name “, “Alexa, set ‘device name’ to ‘number””. Device name is the one you give to the smart strip light.The device named “Smart LED strip light” in this user guide. For example, “Alexa, turn on ‘Smart LED strip light'”.
Part Three-How to control smart light with Google Assistant.
- Step A: Login Google Assistant App, tap “Home control” on the right side bar page.
- Step B: Tap”+ button on the buttom right to enter next page.
- Step C: Find “Tuya Smart” from side bar list.
- Step D: Enter your “Tuya Smart” App account and password to bind the Tuya Smart account to Google Assistant.
- Step E: You can assign the devices to different rooms. You could voice control it by giving voice
- commands: “ Hey Google, turn on device name”, “Hey Google, set ‘device name to number. The device name is the one you give to the smart strip light. The smart strip light is named “Smart LED strip light” in this user guide. For example, “Hey Google, turn on the Smart LED strip light
- How to control the strip light by remote control
The remote control needs 2xAAA batteries and should be placed by the consumer when required. Please do not disturb moving parts when activated as this may cause damage to the remote control. Be sure to insert batteries with the correct polaritīes. Mode +/-:There are 6 dynamic modes to choose from.
12 Month Warranty
Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, providing that the product iS used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under Australian Consumer Law. Kmart will provide you with your choice of a refund, repair, or exchange (where possible) for this product if it becomes defective within the warranty period.Kmart will bear the reasonable expense of claiming the warranty. The warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect. Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at Kmart.com.au for any difficulties with your product. Warranty Claims and claims for expenses incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund fora major failure and Compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>