MILOUZ Galaxy S20 Ultra 5G Wireless Microphones User Manual

MILOUZ Galaxy S20 Ultra 5G Wireless Microphones

Introduction

• Thanks for choosing our product.
• This product is a smart wireless microphone that provides professional-grade recording output.
• Plug and play, no app required. It can be used in different scenes such as Live streaming, Video Recording, Interviewing, Online Teaching, etc.
• The wireless Microphone consists of two parts, one is a Microphone transmitter, and the other one is a 3-in-1 multi-function receiver. (see as below picture)

ID Diagram

1. Windproof sponge
2. Indicator light of microphone
3. Type-c charging port of microphone
4. Microphone clip
5. The power button of the microphone
6. Reset key of the microphone
7. Type-C receiver
8. 3.5 mm receiver
9. Lightning receiver
10. Indicator light of receiver
11. Power Button / Reset Key
12. Type-C charging port of the receiver
13. 3.5mm audio transfer interface

How to use

How to use Lightning/Type-C receiver

First: Plug the Lightning or Type-C receiver into the Lightning or Type-C port of the mobile phone, and the green light of the receiver flashes.

Second: Single press the power button of the mic, and the green light flashes.

Last: The green light of both receiver and microphone is always on, and pairing is successful. Open the phone camera or other APPs, microphone is ready for sound pick-up.

Special Notes:

• The for number: If the mobile phone is in low battery during live streaming, the external power supply directly charges the mobile phone through the Type-C port of the receiver.

How to use a 3.5mm receiver

• Step 1: Plug the 3.5mm connector into the 3.5 jack port of the camera, and single press the power button to power it on, and the green light flashes.
  • 3.5 TRS to TRRS adapter cable (included in the package) is needed for use on phones
• Step 2: Single press the power button of the microphone to power it on, and the green light flashes.
• Step 3: The green light of both receiver and microphone is always on, and pairing is successful. The microphone is ready for sound pick-up.

About UI

Microphone Transmitter

Power on| Single press the power button| Green light on
---|---|---
Power off| Press the power button for 3-4s I auto power off with   no connection   for more than lamin| Green light off
Charging| Type- Ccablecharging| Red light on when charging, and Ilghtoffonce fully-charged
arch for pai ring|  | The green   light flashes slowly
Pa ired|  | Greenlight always on
Low battery alarm| Battery < **20%| Blue light flashes slowly
Mute on| Single press the power butto n| Blue light always on
Clem pairing| Poke th e reset key twice quickly| Greenlight   flushes quickly**

Lightning Receiver

Power on| Plug into the device| Green light flashes
---|---|---
Power off| Unplug from the device| Ughtoff
Search. hing for pairing|  | The green   light flashes slowly
Paired|  | Green light on
Clear pairing| Triple-press the power button

quickly within 10s after powering on

| Green tight flashes quickly

Monitor volume up and down , loop control

| Double press the power button

(Monitor earphone is needed to hear the prompt tone. earphone   is not   included)

| One ·beep• : minimum volume Two · beep ” : med ium volume Three· beep· : maximum volume
Noise reduction sw itc h| Press the  power button once| Turn off noise reduction: Red light on Turn on noi se reduction: Green lght on

Type-C Receiver

quickly within 10safter power on

| The green light flashes quickly

Monitor volume up

and down, loop control

| Double press the power button (Monitor e.irphone I!I. need1o the prompt tone, cellphone 1snot included)| One beep · :minimum volume

Two · beep”: med ium volume Three · beep ‘: maximum volume

Noise reduction sw itch| Pre5s power button once| Turn off noise reduction: Red light on Turn on noise   reduction: Green light on

3.5mm Receiver

Power on| Single press the power button| Green Il ght flashes
---|---|---
Power off| Press the  power button for 3s| Light off
St:!drc.hing for (ldiring|  | Greenlight dishes slowly
---|---|---
Paired|  | Green light on
Low battery| The battery is in low-power| Red light flashes

Clear pairing

| Triple press the p,were button quickly within 10 after power

on

|

Greenlight flshes **quickly**

Monitor volume up and down, loop control

| Double press the power button (Monitor earphone is needed **to hear the peptone, earphone is not**

induced)

| One bee p ‘ :minimum volume

Two be ep· : medium volume Three” beep• : maximum volume

Noise reduction switch| Press power button once| Turn offnoise reduction: Red light on Turn on noise reduction: Green ligh t on

Note: You can listen to the video or recording only after the receiver is unplugged from the device. Some Android phones may have incompatibility issues due to operation system limits. Please see below instruction and compatibility list.

Type-C connector compatibility issues

1. If the mobile phone has OTG function, please manually turn on OTG
   • Step 1: Open the phone “Settings”
   • Step 2: Enter “OTG” to search
   • Step 3: Open “OTG Connection”
2. When connecting the receiver to an OPPO mobile phone via the USB-C adapter, it is required to set Default Recording Device to External Device as below: Settings > Sound&Vibration > Other settings > Default recorder > Add on
3. Android phone compatibility list

Q&A

• Q: Why can’t be used on Android phones?
• A: Some Android phones may have incompatibility issues due to operation system limits. Please see the instructions previously.
• Q: Why microphone can not connect with a receiver?
• A: No matter whether the indicator lights on both the microphone and receiver flash slowly or quickly, Please factory reset as per the below instructions:

1. Power on the microphone and poke the reset key twice quickly with a pin, green indicator lights flash quickly
2. Press the power button to power on the receiver, triple press the reset key, and green indicator lights flash quickly
3. Then the microphone and receiver will pair successfully and the indicator lights will stay on.

• Q: Do the receiver and microphone need to be charged?
• A: Yes, you can use a Type-C charging cable to charge the receiver or microphone.
• Q: What should I do if there is no sound in the recorded video?
• A: Please confirm below 4 situations:

1. Confirm whether the connection is successful: The indicator lights of the microphone and receiver are always on, which means the connection is successful. Only when the connection is successful can the recording sound be started?
2. This microphone supports the Mute on (The blue light is on the microphone) and the Mute off (the green light is on the microphone), make sure the green indicator light of the microphone stays on when recording.
3. You need to unplug the receiver from the phone to hear the sound after the recording is done
4. Confirm whether the phone volume is not at 0, and adjust properly.

• Q: Does the microphone need to be charged?
• A: The microphone needs to be charged with the included Type-C charging cable when it’s running out of power. You may see blue light flashes on the microphone.
• Q: How about the sound quality of this wireless microphone?
• A: The microphone has a built-in noise reduction chip with Al Intelligent noise reduction technology to enhance your sound quality, recommended to use in noise environment. And it does support noise reduction if you need more clearer voice in a quiet environment.
• Q: Can it be used as an amplifier?
• A: It is a microphone to pick up sound only, not a loudspeaker.

Packing list

1. Microphone transmitter (Dual-Channel Version with 2 mics)
2. 3-in-1 multi-function receiver
3. Type-C charging cable (Dual-Channel Version with 2 mics)
4. User manual
5. Storage bag

Any questions pls contact: BESTT669@out look.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>