BRAUN BC12G Classic Analogue Alarm Clock User Guide
- June 14, 2024
- Braun
Table of Contents
BRAUN BC12G Classic Analogue Alarm Clock User Guide
PRODUCT OWERVEV
Battery installation
- Insert 1xAA (1.5V) battery observing the correct polarity, as shown on the diagram.
- Replace battery cover.
Only use new alkaline batteries from a reputable brand.
Time setting
Turn the time set knob ( )on the back of the clock in the direction of the
arrow until the correct time is shown.
Alarm setting
Turn the alarm set knob ( )on the back of the clock in the direction of the
arrow until the desired alarm time is shown.
Alarm function
To set the alarm, push the button at the top of the clock so that the green
alarm bar is showing. To unset the alarm, push the button at the top of the
clock so that the green alarm bar is not showing.
Snooze function
When the alarm is sounding, press down on the main body of the clock and the
SNOOZE/LIGHT button at the base will be activated. The alarm will be stopped
and will sound again in ~5 minutes.
Light function
Anytime, press down on the main body of the clock and the integrated foot
SNOOZE/LIGHT button at the base will be activated. The dial will be
For detailed information refer to the full user manual available at www
.braun-clocks.com/pages/warranty
or scan this code:
Braun helpline
Should you have a problem with your product, please check your local service
center at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the Procter & Gamble Company or its affiliates
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>