HOLY STONE HS210 Mini Drone RC Nano Quadcopter User Manual

: June 14, 2024
: HOLY STONE

HOLY STONE HS210 Mini Drone RC Nano Quadcopter

HOLY-STONE-HS210-Mini-Drone-RC-Nano-Quadcopter-product

Product Information

Product Name: GP Hohe
Manufacturer: Holystone

Contact Information

Phone: +1(855) 888-6699
Website:www.holystone.com
Email: pm usa@holystone.com (USA), eu@holystone.com (EU), ca@holystone.com (CA), Jp@holystone.com (JP)

Product Usage Instructions

Safety Guidelines

Before using the product, perform a thorough check of the following:

The integrity of the parts
Signs of cracks and wear of the propeller
Battery power and effectiveness of the indicator

If any problems are found during the check, do not use the drone until the problem has been resolved.

When flying the drone, consider the following safety guidelines:

Fly in open areas
Maintain line of sight
Fly below 164 feet (50 m)
Avoid flying over or near obstacles, crowds, high-voltage power lines, trees, airports, or bodies of water
Avoid flying near strong electromagnetic sources such as power lines and base stations
Do not use the drone in adverse weather conditions such as rain, snow, fog, and wind
Respect people’s right to privacy by not flying the drone close to others

Operation Requirements

Follow the instructions in the manual for the proper use of propellers and motors.

Use of Battery

Only use the USB charging cable provided by the drone to charge the battery.
Dispose of used batteries carefully and recycle them whenever possible.
If the drone battery runs low, the indicator lights on the drone will blink continuously and the drone will automatically land.
If the transmitter battery runs low, the power indicator of the transmitter will blink continuously and the transmitter will beep.
In such cases, change the battery for the transmitter.

Maintenance:

Refer to the instruction manual for maintenance guidelines.

Package Contents

Transmitter
Drone Battery
Spare Propellers
Screwdriver
Propellers Spanner
Instructions For Use

Drone Details

No specific details are mentioned in the provided text extract.
Please refer to the complete user manual for detailed information about the drone.

DISCLAIMER & WARNING

Please read this Disclaimer & Warning and Safety Guidelines carefully before using our product. This product is not recommended for people under the age of 14. By using this product, you hereby agree to the disclaimer and signify that you have read it fully
- You agree that you are responsible for your own conduct and any damages caused while using this product, and its consequences. You agree to only use this product for its designed purposes and in accordance with local laws, regulations, and all applicable policies and guidelines that HolyStone may provide.
When using this product, please be sure to strictly abide by the specification requirements and safety guidelines stated in this document. Any personal injury, property damage, legal disputes, and all other adverse events caused by the violation of any of the safety instructions or due to any other factor, WILL NOT be HolyStone’s responsibility.

SAFETY GUIDELINES

Check Before Use

This product is a high-precision drone that integrates various electronic stability and control mechanisms. Please be sure to configure this drone carefully and correctly to ensure safe, accident-free operation.
Ensure that the batteries of the drone and transmitter are clean, undamaged, and fully charged before every use.
Ensure that all the propellers are undamaged and are installed in the correct orientation.
Ensure to do a thorough check of the product before each use. Inspect the integrity of the parts, any signs of cracks and wear of the propeller, the battery power effectiveness of the indicator, etc. If after doing a complete check of the drone any problems are found, please refrain from using it until the problem has been resolved.

Flight Environment

HOLY-STONE-HS210-Mini-Drone-RC-Nano-Quadcopter-fig-1

Avoid flying over or near obstacles, crowds, high-voltage power lines, trees, airpo11s, or bodies of water.
DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass.
DO NOT use this drone in adverse weather conditions such as rain, snow, fog, and wind.

Operation Requirements

DO NOT use this product to follow any moving vehicles.
During the flight, turn off the motors only in case of an emergency.
Fly the drone back to you as soon as you are notified that the battery is running low
This product should not be used while drinking alcohol or consuming drugs, if you are feeling fatigued, taking medicine, or feeling any physical discomfort.
Be aware of the volume of noise that the drone produces. Please ensure to keep your distance to avoid ear damage.
Stay away from the rotating propellers and motors.
DO NOT fly in any spaces where drones are prohibited. Please respect people’s right to privacy by not flying your drone close to others.

Use of Battery

Please ensure batteries are fitted, in the correct orientation as shown in the instruction manual.
Avoid short circuits by fitting the batteries correctly, and do not crush or squeeze the batteries as this could cause the risk of a fire or explosion.
DO NOT mix new and old batteries as this can lead to poor performance of the product.
Please dispose of used batteries carefully, do not litter, and recycle wherever possible.
DO NOT expose dead batteries to heat or fire or they may explode.
If the device is not going to be used for an extended period of time, please remove the batteries to prevent potential damage from the drone battery leakage.
Only use the USB charging cable that comes with the drone to charge the battery.
DO NOT connect the battery directly to wall outlets or car cigarette-lighter sockets as this will damage your battery as they are a different voltage.
DO NOT attempt to disassemble or modify the battery in any way
DO NOT use the battery if it gives off an odor, generates heat, becomes discolored, deformed, or appears abnormal in any way If any of these situations occur while the battery 1f 1n used or being charged, remove it from the device or charger immediately and discontinue use.
DO NOT pierce the battery casing with a nail or any other sharp object, break it open with a hammer, or step on it! Dispose or recycle this battery as it may cause personal injury or damage to your drone.
Always charge the batteries on a fireproof surface and away from combustible materials. DO NOT charge on surfaces that can catch fire. This includes wood, cloth, carpet, or on the application’s device.
DO NOT immerse the battery in water or get it wet.
DO NOT solder the battery terminal in any way
Keep batteries out of reach of children or pets.
DO NOT short-circuit the battery by connecting wires or any other metal object to the positive(+/ and negative(-/ terminals.

MAINTENANCE

Clean the product after each use with a clean, soft cloth.
Avoid prolonged exposure to direct sunlight and avoid the buildup of heat on the drone or batteries.
This device is not waterproof and must not be submerged or subjected to water under any circumstance.
- Failure to keep the device completely dry will result in the failure and permanent damage to the unit. Be aware that although it might be dry where you are, droplets of rain or mist from a river or waterfall could be damaging your drone where it is flying.
Frequently Check the charging plug and other accessories for signs of damage. If any part of the device or cables are damaged, avoid use or charging until the device can be serviced.

PACKAGE CONTENTS

DRONE DETAILS

HOLY-STONE-HS210-Mini-Drone-RC-Nano-Quadcopter-fig-6

LOW BATTERY WARNING

When the drone battery runs low, the indicator lights on the drone will blink continuously. In about 1 minute or so the drone will automatically land on low electricity.
When the transmitter battery runs low, the power indicator of the transmitter will blink continuously and the transmitter will keep beeping. When this happens, the pilot should change the new battery for the transmitter.

TRANSMITTER FUNCTIONS

HOLY-STONE-HS210-Mini-Drone-RC-Nano-Quadcopter-fig-7

If you want to install the batteries, please always pay close attention to battery polarity to make sure they are inserted correctly.

JOYSTICK MODE

MODE 2 (Default Setting)

MODE 1

To enter MODE 1, turn on the transmitter while holding the “Speed Switch” button. (Please do not release the “Speed Switch” button until the transmitter is powered on.) HOLY-STONE-HS210-Mini-Drone-RC-Nano-Quadcopter-
fig-9

INSTALLATION

Propeller

See the illustration above. An “A” or “B” is printed on each propeller. Install the propeller to the motor shaft and press it into place.
Attention: The drone will not fly unless the correct propeller is installed on the correct motor shaft.
Removal: Insert the propeller spanner between the propeller and the motor. Be sure to hold the motor while detaching the propeller.

CHARGING

HOLY-STONE-HS210-Mini-Drone-RC-Nano-Quadcopter-fig-12

Connect the battery with the charger.
Plug the charger into a USB charging port on a power bank or USB adapter (5V/2A).
Charging time: about 40-60 minutes.
a. While the battery is charging, the charging indicator light is Red.
- b. When the battery is fully charged, the charging indicator light Will turn Green.
- Before charging, please check the contents of the ” Use of Battery” section of the Safety Guidelines” carefully!

OPERATION GUIDE

All of the operations shown in this manual are demonstrated using

MODE 2.

Pairing

Connect the battery port access to the fuselage power port.
Place the drone on a flat and level surface with the head forward and the tail towards the pilot.
Turn on the transmitter.
Push the throttle joystick up and then down to pair the drone with the transmitter. The LED indicator lights on the drone will turn solid if the drone is paired successfully.

Calibrate the Gyro

As shown in the diagram above, push the left and right joystick simultaneously to the lower left corner to calibrate the gyro.
The indicator lights on the drone will blink quickly and turn solid.
When you hear 2 beeps from the transmitter that indicates the calibration is completed.
Tip: To ensure a stable flight, we suggest that the pilot calibrates the gyro every time after pairing the drone and after a crash.

Auto Takeoff

There are two methods to take off the drone.
Method 1: Press the One Key Start button, and the propellers will start spinning, indicating this drone is ready to fly. Then push the left joystick up slowly to take off. The more the joystick is pushed away from the center position, the faster the drone will change elevation. Always push the joystick gently to prevent sudden and unexpected elevation changes.
Method 2: After pairing, pick up the drone and lay it flat on your palm.
Gently toss the drone into the air, and it will hover in place.

One Key Landing

HOLY-STONE-HS210-Mini-Drone-RC-Nano-Quadcopter-fig-20

When in flight, you can press the One Key Landing button, and the drone will land automatically

FUNCTIONS DETAILS

Altitude-Hold Function

The drone is designed with an altitude-hold function so the drone can maintain its altitude after you release the left joystick | the left joystick will automatically spring back to the middle ).

Trimmer

F/B Sideward Fly Trim

If the drone drifts forward, hold down the throttle joystick and do not release it while pushing the direction joystick down to balance the drone; If the drone drifts backward, hold down the throttle joystick and do not release it while pushing the direction to joystick up to balance the drone.

L/R Sideward Fly Trim

If the drone drifts left, hold down the throttle joystick and do not release it while pushing the direction joystick right to balance the drone; If the drone drifts right, hold down the throttle joystick and do not release it while pushing the direction joystick left to balance the drone. (When you hear one long beep from the transmitter that indicates the drone is adjusted to balance.)

Speed Switch

This drone comes with 3-speed modes (Low/ Medium/ High). Press the Speed Switch button on the upper left of the transmitter to switch the speed. Increase or decrease one speed at a time.
Di” indicates Low speed, “DiDi” indicates Medium speed, and “DiDiDi” indicates High speed. (The Low Speed is the default speed mode.)

Emergency Stop

The Emergency Stop function can be only used in case of emergency during the flight to avoid any damage or injury.
Press the upper left and upper right buttons of the transmitter at the same time, the motors will stop immediately.

360° Flip

When you get familiar with all the functions of the drone, you can try this amazing flip mode. When you fly the drone at least 10 feet, press the 360° Flip button on the upper right of the transmitter, then push the right joystick Forward/ Backward or Left/ Right, and the drone will do a flip towards the corresponding direction.
If you are in MODE 1, push the right joystick Left/ Right or push the left joystick Forward/ Backward, and the drone will do a flip toward the corresponding direction.
Tip: This function will perform better when the battery is fully charged.

Circle Fly HOLY-STONE-HS210-Mini-Drone-RC-Nano-Quadcopter-
fig-27

Press and hold the Speed Switch button for about 3 seconds, and the drone will enter the Circle Fly mode. Exit the Circle Fly mode by long pressing the same button again or pushing the direction joystick.

Auto-Rotating

Press and hold the Flip button for about 3 seconds, and the drone will enter the Auto-Rotation mode. Exit the Auto-Rotation mode by long pressing the same button again or pushing the direction joystick.

Headless Mode

After pairing/calibration, press the Headless Mode button on the transmitter. A beep will be heard from the transmitter, and the lights on the drone will keep blinking. The transmitter will beep slowly to indicate that the drone is in Headless Mode.
Press the Headless Mode button again, and you will hear 2 beeps, the LED indicator lights on the drone will be solid which indicates the drone exits the Headless Mode.

Please make the pilot stays facing the same direction as the direction that the head of the drone faces at take-off.
Under Headless Mode, the forward direction is the direction that the head of drone faces when the drone takes off.
In order to make sure the pilot can tell the drone’s direction, we recommend that pilots to stay in the same orientation as the drone head faces when the drone takes off.
If so, when the pilot pushes the direction joystick forward, the drone will fly forward. If the pilot pushes the direction joystick backward, the drone will fly towards him/her.
If the pilot moves the right stick left / right, the drone will move left/ right relative to you. It is very important that the pilot stays in the same orientation as the drone head faces when the drone takes off.

SPECIFICATIONS

DRONE

Model: HS210
Weight: 22g/0.77oz
Max Flight Time: 7 minutes (per battery)
Motor Model: 0615
Operating Temperature Range: 14°F to + 104°F (-10°C to +40°C)
Size: 80 x 80 x 30 mm

FLIGHT BATTERY

Capacity: 250mAh
Voltage: 3.7V
Battery Type: Lithium-ion polymer Battery
Charging Temperature Range: 41° to 104°F (5° to 40°C)
Charging Time: 40 – 60 minutes (depends on charging power and remaining battery power)

TRANSMITTER

Operating Frequency: 2452-2474 MHz
Max Flight Distance: 50 m (outdoors and unobstructed)
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Battery Type: 1.5V AAA Battery (Not included)

USB CHARGING CABLE

Input: 5 V/ZA
Rated Power: ≤10 W

CONTACT US

Please do not hesitate to contact us if you need further support.
4:00 PM ~ 7:00 AM (PST)
usa@holystone.com(USA)
ca@holystone.com(CA)
eu@holystone.com (EU)
jp@holystone.com JP)
1. 888-6699
For online support, please scan this code with Live Chat

GENERAL INFORMATION

FCC Notice:

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation.

The Supplier’s Declaration of Conformity is available at the following address: https://www.holystone.com/Download/US/HS210_FCC_sDoC.pdf

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator & your body.
IC Notice:
This device complies with Canada Industry license-exempt RSS standard(S).
Operation is subject to the following two conditions:

this device may not cause interference
this device must accept any interference. Including interference that may cause undesired operation of the device.

CAN NMB-003 (B) RF Exposure
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

HOW TO RECYCLE THIS PRODUCT

This symbol on the product or its documentation indicates that it MUST not be disposed of together with household waste.
Uncontrolled waste disposal may harm the environment or human health.
Please separate your device from other types of waste to recycle it responsibly.
This will help to foster the sustainable reuse of material resources.
We suggest you contact your retailer and inquire at your local town hall or business store to find out where and how the drone can be recycled.

BATTERY WARNING:

Failure to follow all the instructions may result in serious injury, irreparable damage to the battery may cause a fire, smoke, or explosion as well.
Always check the battery’s condition before charging or using it.
Please replace the battery if the battery is dropped or has any peculiar smell, overheating, discoloration, deformation or leakage happens.
Never use anything other than the approved LiPo charger to charge the battery. Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is recommended that you use the one provided with the product.
The battery temperature must never exceed 60°C(140°F) otherwise the battery could be damaged or ignited.
Never charge the battery on a flammable surface, near flammable products, or inside a vehicle(preferably place the battery on a non-flammable and non-conductive surface).
Never leave the battery unattended during the charging process.
- Never disassemble or modify the housing’s wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery. DO NOT short-circuit the batteries.
Never expose the Li-Po battery to moisture or direct sunlight, or store it in a place where temperatures could exceed 60°C|car in the sun, for example
Always keep it out of reach of children.
Improper battery use may result in a fire, explosion, or other hazards.
Non-rechargeable batteries are not allowed to be recharged.
- Rechargeable batteries should be charged under adults’ supervision.
DO NOT mix different types of batteries including the new and used ones.
Batteries MUST be inserted with the correct polarity.
The supply terminals MUST not be short-circuited. Regular examination of transformer or battery charger for any damage to their cords, plugs, enclosures, and other parts MUST be done. If there is damage, they MUST not be used until the damage has been repaired.
The packaging has to be kept since it contains important information.
This toy is only can be connected to the equipment with the symbol Class II.

EU RF Power(EIRP): <10 dBm (2452-2474 MHz)

Caution

The max operating of the EUT is 45°C, and shouldn’t be lower than -10°C.
The device complies with RF specifications when the device is used at 0mm from your body.
Declaration of Conformity.

We, Xiamen Huoshiquan Import & Export CO., LTD hereby, declare that the compliance of the essential requirements with the
Directive 2014/53/EU, the RoHS Directive 20 1 1/65/EU and Safety
Directive 2009/48/EC has been fully fulfilled on our product with the indication below:
Product Name: Remote control four-axis series
Model/Mark: HS210/HOLYSTONE
The Statement of compliance is available at the following address: http://www.holystone.com/Download/CE/HS210_EU_DOC.pdf
This product can be used among EU member states.