HOLY STONE HS720G Gimbal GPS Drone Camera User Guide

HOLY STONE HS720G Gimbal GPS Drone Camera

Product Information

The product is the HS720G drone, manufactured by Holystone. It comes with a Quick Start Guide version 1.0. The drone features an HD Camera, an Optical Flow Lens, and a Power Switch. The package also includes propellers A and B, a drone battery, and a battery indicator. The transmitter has a takeoff/landing button, unlock/lock button, return to the home button, power switch, foldable handle, camera angle adjustment, GPS mode switch, left joystick, right joystick, phone holder, and an LCD screen.

Product Usage Instructions

1. Charging: Connect the drone to a 5V/2A charger (not included) to charge the battery. A fully charged battery will be indicated.
2. Getting the Drone Ready: Ensure that the drone is assembled properly and the propellers are securely attached. Insert two 1.5V AA batteries (not included) into the drone battery compartment.
3. Getting the Transmitter Ready: Extend the phone holder fully and make sure it is secure. Ensure the transmitter is powered on.
4. Pairing: Slide the power switch on the drone to the right while holding down the pairing button. The transmitter will emit a long beep when pairing is successful.
5. Connecting to Wi-Fi: Open the Ophelia FLY app and connect to the Wi-Fi network named “Ophelia FLY”.
6. Calibrating the Compass: Follow the instructions on the app to calibrate the compass. The LED lights on the drone will flash yellow and then green when calibration is successful. A solid green light indicates a good GPS signal, while a solid yellow light indicates a weak GPS signal. Avoid calibrating the compass in areas with strong magnetic interference.
7. Unlocking the Motors: Ensure that there are 7 or more stars displayed on the LCD screen of the transmitter, indicating a good GPS signal. Only unlock and control the drone when the GPS signal is good.
8. Take-off: Fly the drone in an open outdoor area without obstructions. Press the takeoff button on the transmitter to initiate takeoff.
9. Flight Direction Control: Use the left joystick to control the height and orientation of the drone during flight. The right joystick controls forward, backward, and lateral movements.
10. Landing: Gently descend the drone to the ground by reducing the throttle using the left joystick. Press the landing button on the transmitter to initiate the landing.

DIAGRAM OF THE DRONE

1. Propeller A
2. Propeller B
3. Propeller B
4. Propeller A
5. HD Camera
6. Drone Battery
7. Optical Flow Lens
8. Battery Indicator
9. Power Switch

DIAGRAM OF THE TRANSMITTER

1. Take off/Landing
2. Left Joystick
3. Unlock/Lock
4. Phone Holder
5. Return to Home
6. Right Joystick
7. Power Switch
8. LCD Screen
9. Foldable Handle
10. Take Photo: Short-Press
11. Camera Angle Adjustment
12. Speed Switch: Long-press
13. GPS Mode Switch
    • Record Video: Long-press

CHARGING

GET THE DRONE READY

GET THE TRANSMITTER READY

PAIRING

• The transmitter sends out a long beep when the pairing is done.

CONNECT TO WI-FI

CALIBRATE THE COMPASS

DO NOT calibrate the compass in locations with strong magnetic interference, such as near magnets, parking lots, or construction sites with underground reinforced concrete structures.

UNLOCK THE MOTORS

Please make sure that you only unlock and control the drone when there are 7 stars or more displayed on the LCD screen(that is, the GPS signal is good).

TAKE-OFF

• Please fly the drone in an open outdoor area free of surrounding obstructions.

FLIGHT DIRECTION CONTROL

The left joystick is responsible for controlling the drone’s height and orientation in flight, whereas the right joystick dictates the movements in forward, backward, and lateral directions.

LANDING

• +1(855)888-6699
• usa@holystone.com (USA)
• www.holystone.com
• eu@holystone.com (EU)

References

• Holy Stone - Dare to fly. Soar to live.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>