CLAOX Flash Wireless Earbuds Instruction Manual

: June 14, 2024
: CLAOX

Table of Contents

CLAOX Flash Wireless Earbuds Instruction Manual
What’s in the Box
Overview
Specifications
How to Use:
★ Please remember to remove the insulating film from the earbuds before

CLAOX Flash Wireless Earbuds Instruction Manual

What’s in the Box

Earbud x2
Charging Case x1
USB-C to USB-A Cable x1
Documentation
Eartips x3 Sets

Overview

Specifications

Model: CLAOX Flash
Bluetooth Version: V5.2
Profile Support: HSP/ HFP/ A2DP/ AVRCP
Stand-by Time: 300 h
Talk Time: 9 h
Music Play Time: 8 h
Charging Time: 1 h
Charging Voltage: DC 5V
Frequency Range: 2.402G-2.480G
Ambient Temperature: -20/+45 C
Transmission Distance: 10m
Earbuds Battery Capacity: 45mAh / 3.7V\
Charging Case Battery Capacity: 500mAh / 3.7V
Driver Unit: 10mm
Sensitivity: 108dB 士 3dB
Impedance: 32ohms
Frequency response range: 20-10000Hz

How to Use:

★ Please remember to remove the insulating film from the earbuds before

use !

– Getting Started

Power on: Take out earbuds from charging case/ long touch the MFB of earbuds for 3 seconds.
Power off: Put earbuds into the charging case, turn off automatically / no device connected，touch the MFB button for 5 seconds.
Earphone pairing: Double -click the left and right

– Single Earbud Connection

Take out one earbud from charging
Open mobile bluetooth, find pairing name “CLAOX Flash”, click and (When the earbud connects to the phone successfully, blue light continuous flashing)

– Double Earbuds Connection

When you take out two earbuds from charging case, earbuds will connect automatically. The main earbud’s white and blue light will flash alternately and earbuds start to enter pairing status. (Now earbuds are in pairing and you could connect to your phone or other Bluetooth devices)
Turn on the phone or other Bluetooth devices, search “CLAOX Flash”, click it and
Re-connect automatically: It will re-connect automatically to paired devices. (Premise is that devices’ Bluetooth is on and earbuds paired record still exists.)

– Note:

These two earbuds already be paired before delivery. So when you get earbuds, it is unnecessary to pair two earbuds by yourself.
If both earbuds cannot be automatically paired (i.e. two earbuds are flash white and blue lights alternately at the same time), double-click the left and right earphones simultaneously.
When TWS connect successfully, “L” earphone blue and white indicator flashes slowly, “R” earphone white light flashes slowly. Then it’s available to connect with mobile. (If pairing is not successful, please put earphones back to charging case and repeat instructions above).
When your earbuds connected phone and you find one earbud no sound, you could turn off bluetooth on phone and put earbuds back to charging case. Then take them out again, these two earbuds will be paired successfully within 10 seconds, and only white light continuously flashing. You could follow above 1 and 2 steps to connect your phone.

– Touch Control

Answer incoming call: Touch the MFB of Earbuds Reject incoming call: Long touch the MFB for 2 seconds Hang up the phone: Touch the MFB
Play: Touch the MFB Pause: Touch the MFB
Vol +: Long touch the R MFB (Play status) Vol – : Long touch the L MFB (Play status)
Next Track: Double-touch the R MFB (Play status) Previous Track: Double-touch the L MFB (Play status) ANC function: Long touch the MFB (Pause status) Siri: Three-touch the L MFB

– Light status

Earbuds:

Charging, the blue light on; Full charge, the light of; Pairing, the blue and white light flash;

Charging Case:

The red light flashes slowly when charging; after fully charged, the indicator light is on.

– Features

IPX6 Waterproof and
2 chip, low power consumption, super compatibility.
Hands-free
True wireless earbuds, you can use by single or a
Active noise cancellation, reject

Maintenance

Please read suggests below in order to helping prolong the product lifespan and clearly understand the warranty clauses.

★Keep the product dry, do not put it in humid circumstance to avoid short circuit.
★Do not expose it to the sun or high heat. High heating will short lifespan of electronic components, damage battery and deform some plastic parts.
★Do not put it in cold circumstance to avoid damage to PCB board.
★Do not attempt to take apart the product, especially non-professionals.
★Do not fall, vibrate strongly, strike with hard objects to avoid damage to inner electronic circuit.
★Do not use high chemical products, detergent to clean the item.
★Do not scratch the surface with sharp items to avert damaging the case and appearance.
★Do not charge it continuously for above 10 hours for the sake of lifespan.

If the product can not work properly, please send it to CLAOX authorized maintenance agents. Our staff will help to solve the problems for you.
Statement: In order to improve product performance, we will upgrade products, the content may change without notice, please forgive! Thank you for your purchase.

Thank you!

Dear CLAOX User,

Thank you for choosing CLAOX product. Your choice is crucial for us, which means CLAOX has added a new user. Hope that we will offer you a good experience with our products and services. Also hope you will put forward the good advice and suggestions in the process of product experience, which can help CLAOX to constantly improve products and services.
If you encounter any problems when using our products, please refer to service process and get help fast and conveniently. Your support is our strongest power, also your recognition and evaluation are great encouragement to CLAOX. Thank you!

CLAOX Team