KISMILE HZB-15N Nugget Ice Maker Countertop User Manual

KISMILE HZB-15N Nugget Ice Maker Countertop

Product Information

Thank you for purchasing the Portable Nugget Ice Maker. This product is designed to quickly and efficiently produce nugget ice, also known as chewable ice, for your convenience. The ice maker is equipped with various features such as a control panel, indicator lights, a water reservoir, and an ice basket.

• Important Safety Instructions
  • Always read and obey all safety messages provided in the user manual.
  • Ensure that the appliance is not operated with a damaged cord.
  • Do not puncture the refrigerant tubing to avoid the risk of fire or explosion.
  • Install the ice maker according to the safety standard for Refrigeration Systems (ASHRAE15).
  • Maintenance and servicing should be carried out by factory authorized service personnel.
  • Place the appliance on an even and flat surface to prevent instability.
• Getting to Know Your Unit
  • The ice maker features the following components:
  • Float switch
  • Secondary water reservoir: It connects directly with the evaporator
  • Water reservoir
  • Maximum water level
  • Filter
• Control Panel:
  • Ice-making and cleaning buttons
  • Ring indicator light
  • Water lacks an indicator light
  • Ice full indicator light
  • Top cover (removable)
  • Hot Air outlet
  • Ice basket
  • Water drain cap (located at the front bottom side of the unit)
  • Ice scoop

Product Usage Instructions

1. Before using the ice maker, carefully read the user manual.
2. Ensure that the appliance is placed on a stable and flat surface.
3. Connect the ice maker to a grounded power source.
4. Fill the water reservoir with clean water up to the maximum water level mark.
5. Close the top cover securely.
6. Press the desired ice-making button on the control panel.
7. The ring indicator light will illuminate, indicating that the ice maker is in operation.
8. Wait for the ice to be produced and collected in the ice basket.
9. If the water level becomes low, the water lack indicator light will illuminate. Refill the water reservoir as needed.
10. If the ice basket becomes full, the ice full indicator light will illuminate. Empty the ice basket to continue ice production.
11. To clean the ice maker, press the cleaning button on the control panel. Follow the cleaning instructions provided in the user manual.
12. If you encounter any issues with the ice maker, refer to the troubleshooting section in the user manual or contact our customer service for assistance.

If you have any further questions or need assistance, please contact us via Amazon Message or our customer service number: 213-4467172 or 661-4358826.

IMPORTANT SAFETY INSTRUCTIONS

• Your safety and the safety of others are very important.
• We have provided many important safety messages manual and your appliance.
• Always read and obey all safety messages.
• This is the safety alert symbol:
• All safety messages will follow the safety alert symbol and the word “DANGER” or “WARNING”.

WARNING/DANGER

These words mean: You can be seriously injured if you don’t immediately follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury and tell you what can happen if the instructions are not followed.

PREPARING YOUR ICE MAKER FOR USE

IMPORTANT SAFETY TIPS

•  When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance.
• Do not operate this，or any other appliance with a damaged cord.
• If the supply cord is damaged, it must be replaced by the manufacturer its service agent, or a similarly qualified person in order to avoid a hazard.
• This ice-maker must be positioned so that the plug is accessible.
• Connect to properly grounded outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.
• Do not run the power cord over carpeting or other heat insulators. Do not cover the cord. Keep the cord away from traffic areas, and do not submerge in water.
• We do not recommend the use of an extension cord, as it may overheat and become a risk of fire. If you must use an extension cord, use No.14AWG minimum size and rated no less than 1875 watts.
• Unplug the ice maker before cleaning or making any repairs or servicing.
• Exercise caution and use reasonable supervision when the appliance is used near children.
• Do not use your ice-maker outdoors. Place the ice-maker away from direct sunlight and make sure that there is at least 6 inches of space between the back of your unit and wall. Keep a minimum distance of 6 inches on each side of your unit free.
• Do not use other liquid to make the ice-cube other than water.
• Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.
• Do not tip over.
• If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to room temperature before plugging it in.
  • WARNING: This appliance must be earthed.
  • DANGER – Risk Of Fire or Explosion. Flammable Refrigerant Used. Do Not Use Mechanical Devices To Defrost Ice Maker. Do Not Puncture Refrigerant Tubing.
  • DANGER – Risk Of Fire Or Explosion. Flammable Refrigerant Used. To Be Repaired Only By Trained Service Personnel. Do Not Puncture Refrigerant Tubing.
  • CAUTION – Risk Of Fire Or Explosion. Flammable Refrigerant Used. Consult the Repair Manual/Owner’s Guide Before Attempting To Install or Service This Product. All Safety Precautions Must be Followed.
  • CAUTION – Risk Of Fire Or Explosion. Dispose Of Property In Accordance With Federal Or Local Regulations. Flammable Refrigerant Used.
  • CAUTION Of Fire Or Explosion Due To Puncture Of Refrigerant Tubing; Follow Handling Instructions Carefully. Flammable Refrigerant Used.
• The ice maker should be installed in accordance with the safety standard for Refrigeration Systems, ASHRAE15. The ice maker shall not be installed in corridors or hallways of public buildings.
• If the unit has with problem that need to be maintained, replacement with similar components and servicing shall be done by factory-authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or improper service.

IMPORTANT:
The wires in this mains lead are colored in accordance with the following code:

• Green or Green with a yellow strip: Grounding
• White: Neutral
• Black: Live

To avoid a hazard due to the instability of the appliance, it must be placed on an even or flat surface.

GETTING TO KNOW YOUR UNIT

1. Float switch；
2. Secondary water reservoir: It connects directly with the evaporator；
3. Water reservoir；
4. Maximum water level；
5. Filter；
6. Control Panel：
   • A. Ice-making and cleaning buttons；
   • B. Ring indicator light；
   • C. Water lack indicator light；
   • D. Ice full indicator light；
7. Top cover, removable from the top；
8. Hot Air outlet；
9. Ice basket；
10. Water drain cap: at front bottom side of the unit；
11. Ice scoop；
12. Handle

OPERATING PROCEDURES & MAINTENANCE

1. Remove the exterior and interior packaging, and then check all the accessories are included. If any parts are missing, please contact our customer service.
2. Remove all the tapes on the unit; take out the accessory parts inside.
3. Clean the interior with lukewarm water and a soft cloth.
4. Locate your ice maker on a level counter table far from direct sunlight and other sources of heat (i.e.: stove, furnace, and radiator). Make sure that there is at least 6 inches between the back and sides of your ice maker and the wall.
5. Allow one hour for the refrigerant fluid to settle down before plugging your ice maker in.
6. The power plug must be accessible directly.
   • WARNING: Fill it with potable water only. Only use drinking water.

ASSEMBLE HANDLE

Rotate the handle to the same angle as the mounting hole on the machine, and put it on the machine. DANGER

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, please call our customer service.

1. This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a grounding plug that mates with standard grounding wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall outlet. Do not under any circumstances; damage the grounding means of the plug. Any questions concerning power and/or grounding should be directed toward a certified electrician.
3. This appliance requires a standard 110-120Volt, 60Hz electrical outlet with good grounding means. Before using your ice maker, it is strongly recommended to clean it thoroughly.

Unplug the unit before cleaning or making any maintenance.

1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water, and a soft cloth.
3. Then use the water to rinse the inside parts, and drain out the water by unplugging the drain cap on the front bottom side.
4. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water.
5. Dry the interior and exterior with a clean soft cloth.
6. When the machine is not to be used for a long time, drain water completely & dry the interior.

USING YOUR ICE MAKER

How to start the unit

1. Take out the ice basket, and pour potable water into the water reservoir, 0.3 gallons of water at most at one time.
2. Put back the ice basket.
3. Plug in and the ring indicator will be red. If you press the “ice /clean” button, the machine will start making ice; If long press the “Ice/Clean” button, it will do automatic cleaning.

CLEAN
For the first time, or the clean procedure has not been running for a long time, it is highly recommended to run this procedure at first.

1. Before the cleaning procedure, please make sure the water drain cap has been inserted into the appliance; otherwise, it will not work properly.
2. Press “ICE/CLEAN” button for 5 seconds, the ring indicator light flashes white, and it will run the cleaning procedure for 15 minutes and then automatically exit, press this button again during the cleaning procedure, it will exit immediately.
3. After the cleaning procedure, remove the top cover and the ice basket, rinse the main water reservoir and the secondary water reservoir, then move the appliance to the edge of the desktop, make sure that the appliance is placed steady, place a water container under the appliance, remove the drain cap from the bottom, dirty water will drain into the water container, then reinsert the drain cap.

Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If the unit isn’t to be used, drain all water & dry the water reservoir.

System Cleaning/Sanitizing Procedure

1. Unplug the nugget ice maker.
2. Take off the bottom drain cap and drain out the water to a sink. See the figure below.
3. Produce a solution by diluting one teaspoon of household bleach with five cups of water for daily cleaning. For monthly cleaning of removing mineral deposits , please use the white vinegar instead of the above water solution (and then plug in to turn on the “cleaning function” for about 5 minutes. After that, unplug it again to leave the white vinegar in the unit more than 12hours).
4. Pour the solution into the water reservoir, up to the “MAX” water level.See the figure below.
5. Plug in the Nugget ice maker, and press and hold the “Clean” button for 5 seconds to initiate the cleaning process(15 minutes). See the figure below.
6. When the “cleaning” indicator lights off, take off the drain cap and drain out the water to a sink.
7. Repeat the step 4 to 6 with fresh water for two more cycles to rinse the inside.
8. Replace the drain cap on the bottom. See the figure below.
9. When completed, fill the unit with fresh water and press the “Ice” button to start ice making process. See the figure below.

How to obtain the ice-cube

1. Before we start making ice, please make sure the water drain cap has been inserted into the appliance; otherwise it will not work properly.
2. Press “ICE/CLEAN” button, ring indicator light flashes white，and it begin to work. Press this button again, it will stop making ice.
3. For the first time, if the appliance has not been used for a long time, it is recommended to clean this appliance before you start to make ice.
4. In the process of making ice, if the “Add water” indicator light is on, and the machine stops working, it needs adding water. After adding water, please restart the machine; Otherwise, it needs waiting for  a long time and then automatically start making ice again. When the ice making machine is restarted, the compressor will have a waiting time of 3 minutes.
5. When the machine is full of ice, it will automatically stop working. The “ice full” indicator light will be on, and the ring indicator light will be white. After the ice is removed, the machine starts working automatically.

ice scoop position
Put the scoop on the top back cover

TROUBLESHOOTING

water, and press “ICE/CLEAN” button again to restart the unit.
“ICE FULL” indicator turns on| There is too much ice.| Suggest ice-cube.| you| to| obtain| the
No ice cube inside.| Remove the probable obstacle inside or clean the inside wall of the ice storage
The ring indicator light flashes red| The ambient temperature or water temperature in the inner tank is too high.| Please run the ice maker below

90 Fahrenheit degree ambient and pour colder water into tank.

Refrigerant liquid leakage.| Press the ICE button twice, restart ice making program, if this problem show up again, verify by a qualified technician.
The cover motor is broken
Pipe    in

blocked.

| the| cooling| system| is
Making Ice too slowly| The Hot Air outlet has been blocked by something.| Hot Air outlet must be guaranteed to have more than 15 CM of

ventilation distance.

Water temperature in the inner tank is

too high.

| Water  temperature  requirement

between 7℃-32℃.

Refrigeration system malfunctions.| Verify it by a qualified technician.
Water leakage| The drain plug is not in place| Put the drain plug in place.
The Pipe Joint in the appliance may be loose| Verify it by a qualified technician.
The seal has reached its service life| Verify it by a qualified technician.

TECHNICAL PARAMETERS

TECHNICAL PARAMETERS & CIRCUIT DIAGRAM

• Modell HZB–15N HZB–15N//S
• Protection Type II
• Power 115V//60Hz
• IIce Making Current 2..7A
• Refrigerant  R600a // 16g
• Vesicant C5H10
• Dimension 287x220x322mm

CIRCUIT DIAGRAM

Thank you for purchasing this product! If you have any questions about the product, such as missing parts, damaged products, product assembling, and operation, please contact us via Amazon

IMPORTANT

• Please call our customer service department for any consulting:
• 213-4467172
• 661-4358826
• (8:30 am – 5:30 pm P.S.T.)
• DATED PROOF OF PURCHASE IS REQUIRED FOR WARRANTY SERVICE.
• Address: ROWAN ELECTRIC APPLIANCE LLC
• 28407 Ascent Way, Santa Clarita, CA 91350
• Phone: 213-4467172 or 661-4358826
• Thank you for purchasing this product! Please read the instructions carefully before using your portable ice maker.
• If you have any questions about the product, please contact us via
• Amazon Message or customer service number: 213-4467172 or 661-4358826

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>