amazon basics EZ-SP22H2EARCO HDMI 2.0 Splitter User Manual
- June 14, 2024
- amazon basics
Table of Contents
amazon basics EZ-SP22H2EARCO HDMI 2.0 Splitter
OVERVIEW
- EZ-SP22H2EARCO is a 2 2 out splitter for HDMI with Ultra
- HD 4K support. This splitter reliably switches two HDMI source signals to two HDMI outputs. Especially when you have a TV that does not support eARC, You can use this splitter to emulate an eARC port and transmit high-quality Atmos sound to your soundbar. One 4K TV and one 1080P TV, It supports 4K and 1080P output simultaneously.
- It supports HDMI 2.0 specification features including data rates up to 4K@60Hz 4:4:4 8bit, Dolby Vision, HDR, and HDCP2.2,
- Deep Color, 3D, Lip Sync, and HD lossless Audio/Video formats.
- Output2 supports ARC/ARC for the soundbar when the out2 switch is set to ‘soundbar mode(ARC/eARC)’.
FEATURES
- OUT2 simulated an eARC port of your TV to connect to your soundbar.
- Distributes switch two HDMI source signals to two HDMI. displays. It supports 4K and 1080P output simultaneously.
- Support HDMI 2.0 4K@60Hz 4:4:4 8bit Dolby Vision and HDCP 2.2.
- Support Audio DE-embed, Optical Audio out without TV connected.
- Support EDID manager.
- Support 3D, Support deep color 30bit, 36bit.
- Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC.
- Dolby Digital Audio format, HDMI ports support Dolby Atmos
- Audio; SPDIF Optical Audio supports Dolby Digital/DTS-HD
- Master Audio/Dolby-AC3/DSD/LPCM/PCM 2.1/5.1CH Audio.
- Support HDMI signal re-timing, never lose quality.
- Plug and Play; No driver required; Installs in minutes.
PRODUCT DIAGRAM
Package Accessories:
- HDMI Splitter x1
- Power Adapter x1
- IR Remote x1
- IR Extender cable x 1
- Reusable Cable Tie ×1
- User Manual ×1
INSTALLATION
Splitter mode
- Connect 2 HDMI2.0 cables (less than 3M) from HDMI source devices to HDMI Splitter input.
- Connect 2 HDMI2.0 cables (less than 3M) from each display (monitor or projector) to the HDMI Splitter outputs.
- Out2 switch set to ‘splitter mode’
Soundbar mode(ARC/eARC)
-
Connect 2 HDMI2.0 cables (less than 3M) from HDMI source devices to HDMI Splitter input.
-
Connect 1 HDMI2.0 cable(less then 3M) from display (monitor or projector) to the
HDMI Splitter output1;Connect 1 HDMI2.0 cable(less then 3M) from soundbar
HDMI(ARC/eARC) to the HDMI Splitter output2 -
Out2 switch set to ‘Soundbar mode(ARC/eARC)’.
INSTRUCTION
SPECIFICATIONS
HDMI version
| ****
HDMI 2.0
| ****
HDMI version
| ****
HDCP 2.2
---|---|---|---
HDMI
resolution
| Up to 4K/60Hz YUV4:4:4 8bit| ****
Video format
| ****
24/30/36 bit deep color
Audio format
| ****
DTS-HD/Dolby-Atmos/DTS/Dolby-trueHD/DSD
Power adapter
format I
| A_C(5D0VH; Z,6OHZ)100VI 24
Output: DC5V/2A
| Max work.ingI
current
| 2D00mA
Operating Temperature range| ****
(-10 to +55C)
| Max baud rate| ****
18Gbps
Dimension (LxWxH)| ****
130.2×64.7×20.2 (mm)
| ****
Weight
| ****
160g
USING TIPS
- Re-powering and unplugging the HDMI cable is a common troubleshooting method.
- In splitter mode, the two outputs are mirrored and can also be used as an HDMI switch 2X1, not a 2X2 matrix.
- In soundbar mode, OUT2 is only for audio(ARC/eARC), Please make sure all devices in the setup support ARC/eARC
- Please use a qualified or brand-new HDMI 2.0 standard cable less than 3 meters.
- This device does not have an infrared receiving window. If you want to use the remote control to switch input, please connect the infrared receiving head to the IR Ext.
NOTES
Please use this machine based on the below instructions to keep a longer
lifetime.
- The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant environment.
- All parts will be free from the strong shake, hit, and fall.
- Touching the device with wet hands is prohibited.
- Please turn the power off when the machine is not used for a long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- Before powering on, please check the connection cable carefully. And make sure that all interfaces are normally connected
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any infringement of patents or other rights of third parties that may result from its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies that may be contained in this document. EZCOO TECHNOLOGY INC. also does not commit to update or to keep current the information contained in this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to this document and/or product at any time and without notice.
CONTACTS
When you need any technical assistance, please send an e-mail to
support@easycoolav.com
Visit to learn more. https://www.easycoolav.com
EZCOO TECHNOLOGY INC
support@easycoolav.com
https://www.easycoolav.com
Benutzerhandbuch
2 in 2 out HDMI 2.0 Splitter
4K@60 4:4:4 8bit HDR, Scaler Output
SPDIF Optical Audio Output
ARC/eARC for Soundbar
EZ-SP22H2EARCO
Make Installation Easy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>