amazon basics A2DP Bone Conduction Headphones User Manual
- June 14, 2024
- amazon basics
Table of Contents
**amazon basics A2DP Bone Conduction Headphones User Manual
**
Product Instruction
Charge
The headphone with a rechargeable battery , the first use of the headset must be fully charged to the battery . In use , if the voice “ Di-Di ” prompting low power , that the battery is low , then you need to charge the headset . the charging cable should be connected to the headset’s magnetic charging port , about 2 hours to fill . Charging status indicator flashing breathing light , full charge often blue light .
Note : Magnetic charging has a positive and negative pole corresponds to each other adsorption can be charged normally , mustual repulsion can not be charged or even cause a short circuit .
Warning : The rechargeable battery of this product must be properly disposed of for recycling . please do not put the battery into the fire ,so as not to cause an explosion Operating instruction
| Function | Operation | Indicator |
|---|---|---|
| On | Press and hole “ ” (around 1-3 seconds ) | Light is on |
| Off | Press and hole “ ”(around 1-3 seconds ) | Light is off |
Music Play
| Function | Earphone status | Press and hold “ ” |
|---|---|---|
| Increase volume | Play music | click “ ” |
| Reduce volume | Play music | click “ ” |
| Next song | Play music | Press and Hold “ ” |
| Last song | Play music | Click and Hold “ ” |
| Pause | Play music | Click and Hold “ ” |
| Resume | Pause | Click and Hold “ ” |
Answer the phone
| F unction | Earphone status | Press and hold “ ” |
|---|---|---|
| Answer the call | Phone calls in | Click “ ” to answer Click “ ” to hang up |
| Decline the call | Phone calls in | Double click “ ” |
| volume control | calling | click “+” / “-“ |
| Phone / Blueto oth earphone switch | calling | Click and hold “ ”(arond 2 |
second)
Operating instruction
How to pair with Bluetooth
Bluetooth pairing: In the off state, press and hold the The power button
for 3 to 5 seconds, the indicator light will enter the red and blue light
flashing state, and then enter the pairing state. Turn on the Bluetooth
(mobile phone / computer) on the device and search for the device name ” X7 “,
Click the device” X7 “to pair and connect.
Bluetooth / MP3 mode switching: Double click the power button (mode)
power button freeSwitch bluetooth and memory mode.
Note: Bluetooth mode is default for boot
AI intelligent voice control
(Phone needs to support voice wake-up function)
| Function | Earphone status | Operation |
|---|---|---|
| Voice control | Bluetooth is connected | Press and hold the “ ” (around 1 |
second)
Note: In the Bluetooth connection status, touch the multi-function button on the right for 1 second to wake up. After hearing the prompt, you can voice control the phone, saving time to operate the phone, fast and smart
Indicator
| Being charging | Red light (flash) |
|---|---|
| Charging completed | Blue light (remain on) |
| Waiting for connection | Flash in red and blue alternately |
| Bluetooth connected | Light is off |
Product parameter
- Charging time: About 2 hours
- Distance: Bluetooth 10 meter
- Battery: 200mAh
- Play: More than 6 hours@65% volume
- Agreement: A2DP, AVRCP, HSP, HFP
- Music format support: MP3, WMA, WAV, APE, FLAC
- Version: 5.3
- Input: 5V/500mA
Care and cleaning
- The headset can not soak seawater / salt water for a long time , filling the magnetic suction part is easy to corrode .
- If not used for a long time , please at least once a month full of electricity .
- Please do not disassemble any parts of the product, if you find that the product has defects , that is ,stop using the product , contact the sales side after sales service.
- Please wipe the water on the surface of the headset after each movement , especially the charging port , to deal with clean in time to prevent port ,affecting the life of the charging port ,affecting the life of the product.
- Keep the product away from fire ,heat,freezing sources, chemicals, violent impact disassembly and extrusion products are strictly prohibited .
- Please use a charging head with an output of 5V1A or less .
Certificate of conformity
Q. C. Passed
Product warranty card
This card is a product warranty certificate, please keep it properly
| Product name: | Product model: |
|---|---|
| Purchase date: | Client’s name: |
Contact:
Date| Bad phenomenon| Solution
| |
| |
| |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>