GROBELL PT95 Pet Grooming Vacuum Kit Instruction Manual

GROBELL PT95 Pet Grooming Vacuum Kit

PRODUCT INFORMATION

PET GROOMING VACUUM KIT – PT95
If you have any issues, please contact our customer service at:

• Email : info@grobell.com
• Website : grobell.com

Instruction Manual

Safety Instructions

• Disclaimer & Warranty
• Package List
• Product Overview
• How to Use
• Accessories Configuration
• Maintenance
• Troubleshooting

Product Overview
The GROBELL Pet Grooming Vacuum Kit PT95 is a versatile grooming tool designed for pet owners. It comes with various accessories to help you groom your pets effectively and efficiently.

Product Usage Instructions

Safety Instructions
Always follow these safety precautions when operating this device to avoid any accidents or injuries:

• Read the entire instruction manual before use.
• Only use the GROBELL Pet Grooming Vacuum PT95 for its intended purpose as specified in this instruction manual.
• Do not allow children to use the device.
• Strictly supervise the device when operating around children, seniors, and pets. Do not leave it unattended.
• People with limited physical or cognitive functions, or lack experience or skill, should not use the device.
• Do not use the device with smoking cigarettes, matches, hot ash, or anything else that is on fire, smoking, or at high temperatures.
• Do not use the device on fragrance-containing products as it may cause a fire.
• Do not put anything into the opening or block it from being used.
• Do not pull the power cord, place heavy objects on the machine’s top, or clamp the wire to close the door.
• Remove the power cord when changing parts or performing maintenance after several uses.
• The device may have an unusual odor during the first use, but it will have no negative effects on the performance.

Disclaimer
GROBELL is not responsible for any damages or issues that occur under the following circumstances:

• Damages caused by incidents, abuse, extreme environmental temperature, physical impact, modification, non-authorized operation mentioned in this manual, or operation of electricity other than that specified in this manual.
• Assemble, disassemble, modification, repairs, or interventions made by persons not licensed by GROBELL.
• Operating the device with wet hands or in a humid environment.
• Neglecting to perform the required scheduled maintenance to protect the assemblies from damage.

Package List

• Main Device
• Power Cord
• Flexible Hose
• Grooming Brush
• Electric Shear
• Cleaning Brush
• Crevice Tool
• Tooth Comb Accessory
• Guard Comb Set x4
• Fitting Bracket
• Fasteners x2
• Screwdriver
• User Manual

Product Usage Instructions

To use the GROBELL Pet Grooming Vacuum Kit PT95, follow these steps:

Step 1: Assembly

1. Gently insert the Dust Cup in the direction of the arrow and remove it in the opposite direction.
2. Connect the desired attachment to the main device through the Flexible Hose.

Step 2: Power On/Off

3. Insert the power cord into an electrical outlet.
4. Press the On/Off Button to start using the device.

Note : The device has three cleaning modes – Silence (Low), Standard (Medium), and Max (High). It is recommended to start with the Silence Mode for the first time and gradually introduce it to your pet to avoid frightening them.

SAFETY INSTRUCTIONS

ALWAYS FOLLOW THESE SAFETY PRECAUTIONS when operating this device. Otherwise may cause circus overload/electrical shock/personal injury.

PLEASE READ THE ENTIRE INSTRUCTION MANUAL BEFORE USE.

IMPORT ANT WARNING

1. Only use the GROB ELL Pet Grooming Vacuum PT95 for its intended purpose as specified in this instruction manual.
2. CHILD USE IS NOT ALLOWED.
3. The device requires strict supervision while operating around children, seniors, and pets. Do NOT leave when the device is on.
4. Persons with limited physical/cognitive functions or lack experience/skill are NOT permitted to operate this device uni e s s uni-supervised by a person responsible for their safety.
5. The device is not functioning correctly if indicates or does not I ig ht up when the power button is pressed with the power cord plugged in. Unplug the cable from the power source immediately and refer to the troubleshooting section in this manual.
6. ALWAYS unplug the power cord after an operation.
7. This device is NOT intended for use in commercial or industrial settings in gs.
8. Do NOT use wet hands to touch the power plug or the device, and do NOT absorb moisture from hair or Ii quid.
9. It should NOT be used or stored in the bathroom or other wet areas.
10. If the power cord or plug is damaged, DO NOT USE THIS PRODUCT. If this occurs, please contact us immediately.
11. Do not use this device. Incorrect assembly may result in electric shock or fire, please contact us if maintenance is required.
12. Because of the risk of fire and explosion, do NOT use this device in areas where flammable or combustible liquids s exist, and do NOT use it on highly flammable liquids s and combustibles.
13. This device should NOT be used with smoking cigarettes, matches, hot ash, or anything else that is on fire, smoking, or at high temperatures.
14. This device should NOT be used on fragrance-containing products. One of the causes of the fire could be the chemical.
15. Please do NOT put anything into the opening or block it from being used.
16. Do NOT pull the power cord, place heavy objects on the machine’s top, or clamp the wire to close the door.
17. Please remove the power cord when changing parts or performing maintenance after several I use.
18. The first use may have an unusual odor, but it will have no negative effects on the body. It will go away after a while. Please understand. However, if the burning odor persists, please STOP using it right away.
19. Please keep the dust cup and the filters clean for a long time. If the dust cup and the filters are dirty, they may be the cause of a fa ii ure, and unexpected accidents may occur.
20. Before proceeding with maintenance, turn off the power and disconnect the power in. There will be electric shock, unexpected accidents, and injury if the power is turned on while in maintenance.
21. When the temperature rises abnormally, the product will stop working. If the suction opening becomes blocked, causing the motor to overheat, please STOP using it immediately. Remember to remove the dust cup and clean the inlet and the filter before attempting to reopen the device after 60 minutes.
22. Please install and use the filters. Working without the filters will become one of the causes of failure.

DISCLAIMER
GROBELL is not responsible for any following circumstances:

1. Damages are the result of incident /abuse using/extreme environment tern per nature/physical impact/modification, non-authorized operation mentioned in this manual, or operation of electricity other than that specified in this manual;
2. Assemble/ disassemble/modification/repairs/interventions made by persons not licensed by GROBELL;
3. Operate the device with wet hands or in a humid environment;
4. The customer neglects to perform the required scheduled maintenance and causes a problem which is related to this neglect;
5. The customer is obligated to maintain the device functioning well.
6. The customer is obligated to use only devices from GROBELL to protect the assemblies from damage.

WARRANTY
FOR A 12-MONTH WARRANTY & LIFETIME CUSTOMER SUPPORT, PLEASE CONTACT US AT:(GROBELL AUTHORIZED DISTRIBUTORS ONLY) INFO@GROBELL.COM  GROBELL.COM

PACKAGE LIST

PACKAGE OVERVIEW

HOW TO USE

Main Device Preparation

1. Gently insert the Dust Cup in the direction of the arrow and remove it in the opposite direction.
2. Connect the attachment to the main device through the Flexible Hose.
3. Insert the plug into an electrical outlet.
   • Please make sure that the dust cup is installed on the main device before plugging the cord, and the same process applies to the cord unplugging.
4. Press the On/Off Button to start using it.
   • There are three cleaning modes: Silence(Low), Standard(Medium), and Max(High). Please start with the Silence Mode for the first time, and gradually introduce it to your pet to avoid frightening them.

Assembly of Accessories

1. Grooming Brush Attachment Assembly
   Insert it gently in the direction of the arrow and remove it in the opposite direction.

2. Tooth Comb Accessory Assembly
   Insert it gently in the direction of the arrow and remove it in the opposite direction.

3. Clipper Guide Comb Assembly
   Insert it gently in the direction of the arrow and remove it in the opposite direction.

4. Fitting Bracket
   Load the Fitting Bracket guide columns into the holes in the chassis of the main device in the direction indicated by the arrow.

   • Optional : Fasteners can be applied to fix the Fitting Bracket if needed.

Use of Different Accessories

1. Tooth Comb: Used to remove hair from the body of the pet.
2. Grooming Brush: Used to remove floating pet hair, old hair, and garbage from your pet’s body, with the added benefit of making the hair more fluffy.
3. Cleaning Brush: Used to remove the hair from people’s clothes and pet shed.
4. Crevice Tool: Used to remove the hair on the couch gap or in difficult-to-reach areas.
5. Electric Shear: Used to pick up the shaved-down pet hair and keep it from flying around.

Please be mindful of the cutting edge and sharp position, and avoid using excessive force, as this may result in skin scratches. The Pet Electric Shear is ONLY for pruning use.

Guard Comb Set
(used with the Electric Shear):

The adjustable clipping guard comb (3 / 6 / 9 / 12mm) can be used to clip hair of various lengths.

Because the Guard Comb Set is small, please store it properly to avoid losing it. When a large amount of hair builds up at the suction port, you can adjust the suction power to absorb it or slightly pull it out to allow it to be picked up.

ACCESSORIES CONFIG
The chart below is only for reference. Please select accessories and modes based on your specific requirements

MAINTENANCE

Dust Cup Cleaning

• Remove the dust box by pressing the Dust Cup Release Button (“PUSH”)
• Pour the hair out by pressing the Dust Cup Chassis Release Butter
• Assemble the Dust Cup in the direction indicated by the arrow.

If you clean the Dust Cup with water or a wet cloth, make sure it is completely dry before assembling it. The motor will be damaged otherwise.

HEPA Filter Cleaning

1. Remove the Dust Cup and take out the HEPA filter.
2. Please use the cleaning brush to remove dust from the HEPA filter’s surface and inside folds. It should NOT be washed with water.
3. Reassemble the HEPA filter.
   • The maintenance period is determined by the frequency of use. Please keep it clean on a regular basis.
   • After a certain number of days, replace the old HEPA filter with a new one.
   • When cleaning, unplug the main device from the power outlet.
   • Be sure to install the HEPA filter after driving. Electric shock and malfunction can be caused by a wet HEPA filter.

Sponge Filter Cleaning

1. Remove the Dust Cup and take out the sponge filter.
2. Please rinse the sponge filter with tap water, and drain the water on after washing
3. Allow it to dry for at least 24 hours in a well-ventilated area.
4. Reassemble the sponge filter.
   • The maintenance period is determined by the frequency of use. Please keep it clean on a regular basis.
   • The sponge filter should be cleaned with cold water on a regular basis.
   • When cleaning, unplug the main device from the power outlet.
   • Be sure to install the sponge filter after drying. Electric shock and malfunction can be caused by a wet sponge filter.

Power Cord Storage

• Take the power cord out of the chassis cable slot of the main device.
• To avoid losing the power cord, please store it properly.

TROUBLESHOOTING

If none of the above solutions work, please discontinue use and contact our customer service team at info@grobell.com

TECHNICAL PARAMETERS

IF YOU HAVE ANY ISSUES, PLEASE CONTACT OUR CUSTOMER SERVICE AT: INFO@GROBELL.COM GROBELL.COM

References

• 阿里云万网虚机IP访问报错提示

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>