BARSKA BC296 Spotting Scope Instruction Manual
- June 14, 2024
- BARSKA
Table of Contents
BARSKA BC296 Spotting Scope
CAUTION
Directly viewing the sun or any light source with this optical device can
cause permanent eye damage.
SET UP AND MOUNTING
- Spread the tripod legs (A) and set the tripod on firm support. Loosen the adjustment screw (B) to place the mounting platform (C) in horizontal position, then rotate the screw to lock the mounting platform.
- Position the mounting shoe (D) of the spotting scope body on the platform (C) then tighten the mounting screw (E) to firmly lock the spotting scope body on the platform.
- Remove the protective lens cap (F) on the objective (G) lens.
ATTACH THE EYEPIECE TO THE SPOTTING SCOPE BODY
- Remove the dust cap (H) on the eyepiece adaptor (I) of the spotting scope body.
- Screw the eyepiece onto the eyepiece adaptor (l).
START THE OBSERVATION
Usage With Fixed Power Eyepiece
- Loosen the adjustment screw (B) and turn the objective (G) of the spotting scope in the direction of the objective to be viewed.
- Look into the eyepiece, then turn the focus knob (K) to focus on the objective.
Usage With Zoom Eyepiece
- Loosen the adjustment screw (B) and turn the objective (G) of the spotting scope in the direction of the objective to be viewed.
- Rotate the zoom ring (L) of the eyepiece to the lowest magnification.
- Look into the eyepiece, then turn the focus knob (K) to focus object.
- Rotate the zoom ring (L) to be desired magnification and adjust the object with the focus knob (K) if necessary.
HOW TO CARE FOR YOUR SPOTTING SCOPE
- Store your spotting scope with the protective lens cap (F) and dust cap (H) in a cool and moisture-free environment.
- To clean the lenses, use a soft bristle brush to remove any dust or dirt and then use soft cloth moisture with alcohol. Wipe lenses from the centre outward and avoid touching the lens, as fingerprints will smear the lens.
- To clean body parts, use a soft cloth with warm water and mild soap to remove dirt.
- Do not dismantle the spotting scope or the eyepiece. If they need repair or adjustment, please contact the BARSKA dealer in your country. For further details please refer to the BARSKA warranty.
PARTS & ACCESSORIES
The parts and accessories that come with your spotting scope might be different from country to country, please refer to the packaging to find out how your spotting scope is equipped.
LIMITED LIFETIME WARRANTY
SPOTTING SCOPES
BARSKA® Optics, as manufacturer, warrants this new precision optical product
to be free of original defects in materials and/or workmanship for the length
of time specified by this warranty. This warranty does not include damage
caused by abuse, improper handling, installation, maintenance, normal wear-
and-tear, unauthorized repairs or modifications or tampering in any way. This
warranty is limited to the original purchaser and is not transferable.
This warranty applies only to products purchased in the United States of
America and Canada. In the event of a defect within 30 days, the consumer must
return the defective unit to the BARSKA dealer (the place of purchase) at
his/her own expense. Beyond 30 days, BARSKA products should be sent to the
following address for warranty repairs. Products must be packed carefully and
sturdily to prevent damage in transit and returned freight prepaid to:
BARSKA® OPTICS
855 Towne Center Drive
Pomona, CA 91767
For additional and updated information
please visit our website at www.barska.com
Please email info@barska.com or call
1-888-666-6769 for the Return
Merchandise Number (RMA#) before any returns.
NOTE: All merchandise received without a valid RMA # will be returned to
the shipper at his/her own expense.
Please include all of the following when returning BARSKA products for service
and/or replacement:
- Please write your complete details (Name, Address, Telephone #, E-mail address, RMA#, etc.)
- Purchase receipt or Proof of Purchase. (Original/Copy)
- A brief explanation of the defect.
- A Check/Money Order of $25.00 to cover inspection, shipping and handling.
Please allow 6-8 weeks for delivery. This product will either be replaced or repaired at the discretion of the warrantor. If it’s a discontinued item, we will replace the product with an equivalent product. Should the repair not be covered by this warranty, an estimate will be sent for your approval. Non- warranty repairs or refurbishing of your optical products are always provided at a reasonable cost. BARSKA® Optics shall not be liable for any consequential, incidental and/or contingent damages whatsoever. We will not pay shipping, insurance or transportation charges from you to us, or any import fees, duties and or taxes. This warranty supersedes all previous BARSKA® Optics warranties.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>