ADVANTECH WoL Gateway Router App User Guide
- June 14, 2024
- Advantech
Table of Contents
WoL Gateway Manual
WoL Gateway Router App
© 2023 Advantech Czech s.r.o. No part of this publication may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including
photography, recording, or any information storage and retrieval system
without written consent.
Information in this manual is subject to change without notice, and it does
not represent a commitment on the part of Advantech.
Advantech Czech s.r.o. shall not be liable for incidental or consequential
damages resulting from the furnishing, performance, or use of this manual.
All brand names used in this manual are the registered trademarks of their
respective owners. The use of trademarks or other designations in this
publication is for reference purposes only and does not constitute an
endorsement by the trademark holder.
Used symbols
Danger – Information regarding user safety or potential damage to the
router.
Attention – Problems that can arise in specific situations.
Information – Useful tips or information of special interest.
Example – Example of function, command or script.
Changelog
1.1WoL Gateway Changelog
v1.0.0 (2012-09-27)
- First release.
v1.0.1 (2013-02-18)
- Fixed issue with starting DHCP server.
v1.0.2 (2014-01-03)
- Added support of FW 4.0.0+.
v1.1.0 (2017-03-16)
- Recompiled with new SDK.
v1.1.1 (2018-09-27)
- Added expected ranges of values to JavaSript error messages.
Description of router app
Router app is not contained in the standard router firmware. Uploading of this
router app is described in the Configuration manual (see ChapterRelated
Documents).
The router app is not v4 router platform compatible.
This module allows router to listen to communication on the specified UDP
port, receive packets from a predetermined source (Source IP) and forward
these packets to appropriate address (Destination IP) as a broadcast. The
module also puts the final touches to DHCP server configuration.
For configuration WoL Gateway router app is available web interface, which is
invoked by pressing the module name on the Router Apps page of the router web
interface. The left part of the web interface (ie. menu) contains only the
Return item, which switches this web interface to the interface of the
router.
Configuration of router app
The actual configuration of this router app is performed via the form on the right side. The first item in this form – Enable WoL Gateway – is used to activate these router app. Meaning of other items is described in the table below:
| Item | Description |
|---|---|
| Source IP | Source IP address (packets are received from this address) |
| Destination IP | Destination IP address (packets are forwarded to this address) |
| UDP Port | UDP port used for communication |
| FTP Server IP | IP address of an FTP server (corresponds to DHCP parameter 161) |
| Domain Name | Domain Name |
| Domain Name Servers | Specifies up to three DNS servers |
Table 1:Description of items in web interface
All changes will take effect after pressing the Apply button.
Related Documents
You can obtain product-related documents on Engineering Portal at
icr.advantech.cz address.
To get your router’s Quick Start Guide, User Manual, Configuration Manual, or
Firmware go to the Router Models page, find the required model, and switch to
the Manuals or Firmware tab, respectively.
The Router Apps installation packages and manuals are available on the Router
Apps page.
For the Development Documents, go to the DevZone page.
Advantech Czech s.r.o., Sokolska 71, 562 04 Usti nad Orlici, Czech Republic
Document No. APP-0071-EN, revision from 26th October, 2023.
References
- Advantech 4G, 5G Cellular Routers & Gateways for IoT applications - Engineering Portal
- Advantech 4G, 5G Cellular Routers & Gateways for IoT applications - Engineering Portal
- DevZone - Cellular Routers Engineering Portal
- Router Apps - Cellular Routers Engineering Portal
- Router Models - Cellular Routers Engineering Portal