FOXGEAR TW-100 Mini Amplifiers User Manual
- June 14, 2024
- FOXGEAR
Table of Contents
TW-100 Mini Amplifiers
User Manual
TW-100 Mini Amplifiers
TW-100
The TW-100 is clearly inspired to 60’s and 70’s era of Fender Amplifiers, and
exactly reproduces that kind of tone. Big Headroom, punch, Bass, and brilliant
High frequencies that make it one of the best clean amp of history.Our Miniamp
series is designed to be the best friend of any pedal and offers the best
solution for rehearsals, gigs, home practice, studio applications, without
compromises.
The Analog Variable Cabinet Simulator is a 100% analog simulation of different
EQ curves that speakers and microphones apply to your amplifier in real life,
and with a simple and effective knob, makes you able to find your best sweet-
spot to make the direct out sounds exactly like your real speaker behind your
back. It is not just another post EQ control, it works on the feedback of
certain frequencies, making the cab simulator so much powerful and versatile.
The Amplifier part of the TW-100 is made of a Preamp Level, an entire Tone
Stack in the style of the amp it is emulating, and the AMP LEVEL, that set the
volume of the amplified sound coming from your connected Guitar Speaker
Cabinet. (100W RMS @4 Ohm, 50W RMS @ 8 Ohm, 25W RMS @ 16 Ohm.)
On The left colored side, you have the “direct controls” which refers to the
XLR out, such as the XLR level to adjust separately the volume going to the
D.I. balanced Out, and the VARICAB that let you find the perfect match between
the guitar cabinet sound and your sound coming from the PA.
Ground/Lift switch is recommended when you’re connected to other grounded
devices to avoid ground loops. Standby/On makes your guitar amplifier in
standby mode. Direct switch let you disengage the Analog Cabinet Simulator to
let you add your fav IR’s based cab sim from other device/DAW.
TECH SPECS:
| Power In | 30VDC – 4A (positive TIP) |
|---|---|
| Power out | 100W RMS @4Ohm max 3%THD |
| XLR out Impedance | <20K Ohm |
| Speaker Output Impedance | 4/8/16 Ohm |
| S/N ratio | <90db |
| Larghezza (Width) | 120mm. (4,7”) |
| Lunghezza (Length) | 85mm. (3,3”) |
| Altezza (Height) | 30mm. (1,1”) |
| Peso (Weight) | 0,5Kg. (1p) |
PLEASE
NOTE: no serviceable parts inside, do not open. Carefully read indications
on yellow card inside the box, and yellow label on the PSU’s cable. ALWAYS
connect the Amplifier first and then plug the main to wall socket. DO NOT
connect the speaker out to any grounded devices.
VARICAB:
The VARICAB control is an Analog Variable Cabinet Simulator that let you find
the right sweet spot when going direct to mixer console, audio interface, or
wherever you want to hear your guitar/pedalboard, sounds like it sounds with
your guitar cabinet. It’s not just an EQ control, it works on the Feedback of
the preamp, so: Adjust the preamp amount, and just rotate the VARICAB control
to change the tone, then enjoy the separate XLR Volume Level – MASTER Level
**TIPS:**
The image of a small combo on right and a full 4×12” on left, doesn’t mean
just Bright-Dark.. but express the complexity of harmonic content, and
richness of sound that is typical of different amps. Always check both sides
to hear what it changes, cause the Varicab is also meant to better fit
different input impedance of different kind of devices. The Varicab effect is
strictly dependant by the preamp volume, and our suggestion is to connect it
to a line input, instead of a pre-mic input on your Audio interface, to not
sum 2 preamps.
Terms of Warranty
FOXGEAR product warranty covers 5 years from date of purchase The warranty does not cover damage caused by accident, misuse and / or neglect, failure to comply with the instruction manual, repair and attempted repair by personnel not authorized by FOXGEAR LLC, any damage caused during transport and delivery, (claims must be presented to the carrier); damage to any product that has been altered or on which it has been removed, defaced or altered serial number; damage caused by faulty connections or connections to equipment failures and/or defective power cables. Responsibility of FOXGEAR LLC for any defective product is limited to repair or replacement of the product at our discretion. The FOXGEAR LLC not be liable for damages resulting from loss of use of the product, lost time operation interrupted by non-use of the product, loss of business or any other damages or incidental, consequential or otherwise; damage in transit or damage caused by inadequate packaging or of poor quality. Assistance: Please contact us for information on how, where and when to ship the product after the return has been Authorized by FOXGEAR LLC . The repaired goods should be packed carefully and we recommend not include any accessories such as cables, effects, manuals, etc. .. Please attach a copy of the original receipt of purchase (invoice or receipt) together with a problem description and your personal details. THE WARRANTY IS NOT VALID ‘WITHOUT A COPY OF YOUR RECEIPT OF SALE CERTIFYING THAT THE DATE OF PURCHASE. Foxgear pedals are designed in Italy and proudly handmade in our own factory in PRC.
Foxgear LLC, 2 East Section Baigang, Lishui,
Nanhai district, Foshan City, Guangdong,
China,
[email protected]
www.foxgeardistribution.com