FOXGEAR 100W Series Mini Amplifiers 100W British Classic amp Pedal User Manual
- June 14, 2024
- FOXGEAR
Table of Contents
V-100
100W Series Mini Amplifiers 100W British Classic amp Pedal
The V-100 is clearly inspired to 60’s era of Vox Amplifiers, and exactly
reproduces that kind of tone. Big Headroom, punch, Mids, and brilliant High
frequencies that made it one of the most characteristics tone in the rock
history.
Our Miniamp series is designed to be the best friend of any pedals and offers
the best solution for rehearsals, gigs, home practice, studio applications,
without compromises. The Analog Variable Cabinet Simulator is a 100% analog
simulation of different EQ curves that speakers and microphones apply to your
amplifier in real life, and with a simple and effective knob, makes you able
to find your best sweet-spot to make the direct out sounds exactly like your
real speaker behind your back. It is not just another post EQ control, it
The Amplifier part of the V-100 is made of a Preamp Level, the same Tone CUT
in the style of the old Vox Amps, and the AMP LEVEL, that set the volume of
the amplified sound coming from your connected Guitar Speaker Cabinet. (100W
RMS @4 Ohm, 50W RMS @ 8 Ohm, 25W RMS @ 16 Ohm.) On The left colored side, you
have the “direct controls” which refers to the XLR out, such as the XLR level
to adjust separately the volume going to the D.I. balanced Out, and the
VARICAB that let you find the perfect match between the guitar cabinet sound
and your sound coming from the PA.
Ground/Lift switch is recommended when you’re connected to other grounded
devices to avoid ground loops. Standby/On makes your guitar amplifier in
standby mode. Direct switch let you disengage the Analog Cabinet Simulator to
let you add your fav IR’s based cab sim from other device/DAW.
TECH SPECS:
Power In
Power out
XLR out Impedance
Speaker Output Impedance
S/N ratio
Larghezza (Width)
Lunghezza (Length)
Altezza (Height)
Peso (Weight)| 30VDC – 4A (positive TIP)
100W RMS @4Ohm max 3%THD
<20K Ohm
4/8/16 Ohm
<90db
120mm. (4,7”)
85mm. (3,3”)
30mm. (1,1”)
0,5Kg. (1p)
---|---
VARICAB:
The VARICAB control is an Analog Variable Cabinet Simulator that let you find
the right sweet spot when going direct to mixer console, audio interface, or
wherever you want to hear your guitar/pedalboard, sounds like it sounds with
your guitar cabinet. It’s not just an EQ control, it works on the Feedback of
the preamp, so: Adjust the preamp amount, and just rotate the VARICAB control
to change the tone, then enjoy the separate XLR Volume Level – MASTER Level
TIPS:
The image of a small combo on right and a full 4×12” on left, doesn’t mean
just Bright-Dark.. but express the complexity of harmonic content, and
richness of sound that is typical of different amps. Always check both sides
to hear what it changes, cause the Varicab is also meant to better fit
different input impedance of different kind of devices. The Varicab effect is
strictly dependant by the preamp volume, and our suggestion is to connect it
to a line input, instead of a pre-mic input on your Audio interface, to not
sum 2 preamps.
Terms of Warranty
FOXGEAR product warranty covers 5 years from date of purchase The warranty
does not cover damage caused by accident, misuse and / or neglect, failure to
comply with the instruction manual, repair and attempted repair by personnel
not authorized by FOXGEAR LLC, any damage caused during transport and
delivery, (claims must be presented to the carrier); damage to any product
that has been altered or on which it has been removed, defaced or altered
serial number; damage caused by faulty connections or connections to equipment
failures and/or defective power cables. Responsibility of FOXGEAR LLC for any
defective product is limited to repair or replacement of the product at our
discretion. The FOXGEAR LLC not be liable for damages resulting from loss of
use of the product, lost time operation interrupted by non-use of the product,
loss of business or any other damages or incidental, consequential or
otherwise; damage in transit or damage caused by inadequate packaging or of
poor quality. Assistance: Please contact us for information on how, where and
when to ship the product after the return has been Authorized by FOXGEAR LLC .
The repaired goods should be packed carefully and we recommend not include any
accessories such as cables, effects, manuals, etc. .. Please attach a copy of
the original receipt of purchase (invoice or receipt) together with a problem
description and your personal details. THE WARRANTY IS NOT VALID ‘WITHOUT A
COPY OF YOUR RECEIPT OF SALE CERTIFYING THAT THE DATE OF PURCHASE. Foxgear
pedals are designed in Italy and proudly handmade in our own factory in PRC.
Foxgear LLC, 2 East Section Baigang, Lishui, Nanhai district, Foshan City,
Guangdong, China,
support@foxgeardistribution.com –
www.foxgeardistribution.com
PLEASE NOTE: no serviceable parts inside, do not open. Carefully read indications on yellow card inside the box, and yellow label on the PSU’s cable. ALWAYS connect the Amplifier first and then plug the main to wall socket. DO NOT connect the speaker out to any grounded devices.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>