Speedy TX ULTRA 7 G Light Weight User Manual
- June 14, 2024
- Speedy
Table of Contents
TX ULTRA USER MANUAL
Instruction Diagram
Notice: Please use the screws to install and fix the TX ULTRA as the mainboard and the cover are separated.
Blue LED Channel| Constantly ON: The current frequency point is Channel 1
OFF: The current frequency point is one of Channel 2~Channel 8.
---|---
Red LED Band| Red LED will keep blinking, at this time the Red LED is not
used to indicate the current Band information.| Constantly ON: the current
band
is Band1,
OFF: the current band is one of
Band 2 ~ Band 6.
Orange LED Power| Orange LED will keep blinking, at this timethe Orange LED is
not used for indicating the current Power information.| Light OFF —————————-
25mW
Binking once in 3 seconds ———- 200mW
Blinking once in 2 second ———- 800mW
Blinking once in 1 second ———– Max mW
Blinking 4 times in 1 second(fastFlash) —- PIT mode
Key Operation
Short press the button to switch CH1/2/3/4/5/6/7/8.
Long press the button for 2 seconds to enter the BAND mode; then short press
to switch band1/2/3/4/5/6.
Long press the button for 4 seconds to enter the POWER mode; then short press
to switch to 25/200/800/Max mW.
Long press the button for 10 seconds to unlock/lock.
Support IRC Tramp Protocol
TX ULTRA supports the IRC TRAMP protocol and the modification of video
transmission parameters through the remote control, including frequency,
working power and so on. If your flight controller supports Bluetooth or WIFI,
you can also modify the video transmission parameters through the SpeedyBee
app.
NOTE: For BetaFlight flight controller firmware above BetaFlight
4.1.0,you need upload a VTX Table to the flight controller before using the
remote control to modify the video transmitter parameters normally.
SpeedyBee-TX ULTRA(CE).json”
SpeedyBee-TX ULTRA(USA).json
For the use of the video transmitter table, please refer to this article “How
to Setup Betaflight VTX Table – SmartAudio Tramp VTX Control” by Oscar Liang
Flight controller wiring
Note: Take UART1 for example
JST Connection:
Pad Connection:
BetaFlight 4.1 or above setting
Remote control
Note: Take Mode-2 for example
-
BFCMS-FEATURES-VTX TR
-
Change Selection
-
Edit Setting Values
Frequency Table
Orange is a disabled channel in locked state
Channel| CH1| CH2| CH3| CH4| CH5| CH6|
CH7| CH8
---|---|---|---|---|---|---|---|---
1 Band A| | 5865
5845| 5825| 5805| 5785| 5765| 5745| 5725
2 Band B| 5733| 5752| 5771| 5790| 5809| 5828| 5847| 5866
3 Band E| 5705| 5685| 5665| 5645| 5885| 5905| 5925| 5945
4 Airwave| 5740| 5760| 5780| 5800| 5820| 5840| 5860| 5880
5 Race Band| 5658| 5695| 5732| 5769| 5806| 5843| 5880| 5917
6 Low Race| 5362| 5399| 5436| 5473| 5510| 5547| 5584| 5621
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>