Kaadas K9 Digital Door Lock User Manual

Kaadas K9 Digital Door Lock

CAUTIONS
This section contains important information to ensure the user’s safety and prevent potential damage to property. Please, read this section carefully and use the product accordingly.

1.  Master PIN Code: Default Master PIN code is [12345678],please modify ii immediately.
2.  User PIN Code: It can be 6-12 digits number. You can register and up to 10 users.
3.  Card: II is optional. Maximum capacity is 100 with user number [00-99].
4.  Fingerprint: Maximum capacity is 100 with user number [00-99]
5.  Be sure to correctly match the poles(+/-) when installing the batteries. Install the batteries with the correct poles(+/-).
6.  Replace all batteries immediately after they run out of power, and never mix new batteries  with used ones.

Open Door Index

| ****

Menu Table

| ****

Menu Acc ess

---|---|---|---

K9-2

| ****

PIN Code – 6.1 Card – 6.1.3

| 5.1 Enroll User PIN Code

5.3    3 Enroll Card

5.4  Delete User PIN Code

5.6  6 Delete Ca rd

5.7  Opening Mode Setting

5.9 Change Master PIN Code

| ****

Master PIN Code

| | 5.1 Enroll User PIN Code|

K9-5

| PIN Code   – 6 .1.1

Fingerprint  – 6.1.2

Ca rd                 – 6.1.3

| 5.2    2 Enroll Fingerprin t

5.3    3 Enroll Card

5.4    Delete Use r PIN Code

5.5    Delete Fingerprint

5.6    6 Delete Card

5.7     7 Opening Mode Setting

5. 9 Change Master PIN Code

| ****

Master PIN Code

Overview

The product components used may vary depending on the installation environment and model number.

Package content
This described package content is for reference only, the real products should be considered as final. If some components lost, please check with the sellers.

1.  Battery cover (1 pc)
2.  Mounting Screw (1 pc)
3.  Inside Escutcheon Assembly (1 pc)
4.  Pressure Spring (1 pcs)
5.  Square Shafi (2 pcs)
6.  Mounting Plate Screw (4 pcs)
7.  Mounting Plate (1 pc)
8.  Lock Body (1 pc)
9.  Connecting Screw Bolt (1 pc)
10.  Outside Escutcheon Assembly (1 pc)
11.  Rubber Plug (1 pc)
12.  Mounting Screw{1 pc)
13.  Connecting Screw Boll {4 pcs)

Before Installation

Confirm open direction  This product can be installed on left-in, left-out .right-in, and right-out doors.

Change open direction
Please change position of screws according to open direction.

1. Please choose correct screw pack according to your door thickness.
2. Default screw pack is for door thickness 38-60mm, please contact our dealer if other

Mark and drill bores by using the installation template first. then fix the mortise into . Tighten the 4 screws to fix the mortise lilia on the door.

Fix 5 screw bolls on the front escutchson, place square shaft and pressure spring Into the bore . Lop bore.Then align and insert squareInstall the mounting plate with fixing screws tightly against the door surface

Insert the connecting wires of front escutcheon Into the related aooketa of the back escutcheon. Then align and in118rl Tighten the 2 fixing screws.

Install the batteries and the battery cover. Covers Iha rubber plug, than install the striker assembly to finish Installation.handle switch_ and mechanical key if

Note
After Installing the striker assembly, please check lftha lock works smoothly by opening/closing door.

Note:
Test if mechanical key works smoothly after installation.

How to set up your product

How to access into master mode

Menu table

1. You can operate following the voice guide.
2.  The length of both master PIN code and user PIN code is 6-12 digits
3.  Enter [ 400#] will get Serials Number.

User settings

• Access into master mode, press [1] for user setting.Then press [1] to enroll user PIN code.
• Enter 2 digital user number (00-09), and confirm with[#] key.
• Enter user PIN code (6-12 digits), and confirm with[#] key; Then repeat above operations . Voice prompt of “settings succeed”,

Enroll Fingerprint(optional)

• Access into master mode, press [1] for user setting.Then press [2] to enroll user fingerprint.
• Enter 2 digital user number (00-99),  and confirm with[#] key.
• Place your finger on the fingerprint sensor, then take away your finger after voice prompt “Remove finger and scan again”.
• Repeat above steps multiple times until voice prompt “settings succeed”.

Enroll Card

• Access into master mode, press [1] for user setting. Then press [3] to enroll user card.
• Enter 2 digital user number (00-99), and confirm with[#] key.
• Place card on the card icon area until beep sound and voice prompt “settings succeed”

Delete User PIN Code

• Press [1] 1o delete single user
• Enter 2 digital user number (00-09), and confirm with[#] key
• Voice prompt of “Deletion succeeded”
• Press [2] to delete all users
• Voice prompt of “Deletion succeeded”

Delete UsAer Fingerprint

• Press [1] to delete single user
• Enter 2 digital user number (00-99), and confirm with[#] key OR Place the related finger on the fingerprint sensor to delete until one beep sound.
• Voice prompt of “Deletion succeeded”
• Press [2] to delete all users
• Voice prompt of “Deletion succeeded”

Delete User Card (optional)

• Press [1] to delete single user
• Enter 2 digital user number (00-99), and confirm with[#] key OR Place the related RF card on the card icon area to delete until one beep sound.
• Voice prompt of “Deletion succeeded”
• Press [2] to delete all users
• Voice prompt of “Deletion succeeded”

Opening Mode Setting

• Press [1] for normal mode (single verification) ,which means opening by Pl N code or fingerprint or card.
• Press [2] for security mode (double verification) ,which means opening by PIN code+fingerprint or PIN code +card or fingerprint+card

Change Master PIN Code

• Access into master mode, press [1] for user setting.Then press [9] to change master PIN code.
• Enter new master PIN code (6-12 digits) and confirm with[#] key.Then repeat above operations.
• Voice prompt of “settings succeed”

System Setting

• Access into master mode, press [2] for system setting. Then press [3] for volume setting.
• Press [1] for voice mode.
• Press [2] for mute mode, excluding alarm and menu operation.

Language Setting

• Access into master mode, press [2] for system setting.Then press [4] for language setting.
• Press [1] for Chinese Voice.
• Press [2] for English Voice.

Bluetooth Setting

• Access into master mode, press [5] for bluetoo1h setting.
• Press [1] to connect bluetooth.
• Press [2] to disconnect bluetooth.
• Press [3] to disable blue1ooth. After that, press [1] to enable bluetooth.

System Query

• Access into master mode, press [3] for system query.
• Press [1] to get unique Serials Number.

How to use your lock

1.  Touch pad screen by palm to lighten keypad
2.  Enter the enrolled PIN code with end of[#]. Voice prompt “door opened”
3.  Push or Pull handle to open the door
4. The random numbers can be added before and after the real PIN code, this prevents the user PIN code from being exposed. The maximum length is 32 digits.

Fingerprint opening

1.  Place the enrolled finger properly on the fingerprint sensor area until one beep sound and voice prompt “door opened”

2. Push or Pull handle to open the door

3.  Place the enrolled card properly on the card icon area until one beep sound and voice prompt “door opened”

4.  Push or Pull handle to open the door

Security mode
In security mode, double verification is required for opening door.

Open door by mechanical key override In case of forgetting Pl N code, battery run out or system error; Mechanical key is used to open door as backup mode. Insert the key into key hole and rotate ii with proper angles. Then push or pull handle to open the door.

Auto /Manual Mode

1. . Taking out battery cover lo find the A/M
2.  [A] means auto mode: when door is closed, the deadbolt will be drivad out automatically,then door will be in locked status.
3.  [M] means manual mode: when door is closed, the deadbolt will not be drived out,then the door will be in unlocked status.

CLOSE button

1.  Click [CLOSE.] button to lock the door.
2.  Double click [CLOSE.) button lo open the door.
3.  Long press [CLOSE.] button to double lock the door. The privacy mode will be enabled,only Master PIN code and key can open the door from outside.User PIN code /Fingerprint /Card is prohibited.

Locking Operation

Auto locking
In auto mode, door will be locked automatically in 1.5 seconds after closing. Voice prompts “door closed’

Manual locking
In manual mode, click [CLOSE.] button to lock the door from inside or verify user fingerprint /PIN code f card to lock the door from outside. Voice prompts “door closed”

Defense Mode

1. Enable: After door is locked, press[‘.’.::) button to enable defense mode. Voice prompt “Outside forced lock enabled”. In this mode,when the door is unlocked from inside, the alarm will be triggered.
2.  Disable: Once the door is opened properly from outside, the defense mode will be disabled.

Safe Handle Feature

1.  E.nable: move the safe handle switch to display’red’mark. Once safe handle feature is enabled, the indoor handle will be locked.
2.  Disable: move the safe handle switch to display’green’mark. The indoor handle can be pushed or pulled freely.

MuteNoice Switch

1. Voice> Mute : When default selling is voice mode, longpress (#) button to enable mute mode. After the lock go back to sleeping status, mute mode will be disabled automatically.
2. Mute> Voice: When default selling is mute mode, long press[#] button to enable voice mode. After the lock go back to sleeping status, voice mode will be disabled automatically.

Restore To Factory Setting

Long press [RE.SJ button for 5 seconds to make the lock restore lo factory setting. Voice prompt “Restored to factory settings.Change master PIN code.”After thal, all user information and settings will be cleared.After the lock is restored to factory selling, all users and settings will be cleared.The master PIN code will be changed into [12345678] and required for changing immediately.

Emergency Power Supply

When the battery voltage Is too low to open the lock from outside, you can use 5V power bank to charge the door lock via Micro USB port After the door Is unlocked, please replace all batteries immediately When the lock system crash down, you can restart system by pressing the reboot button.  When battery voltage is lower than 4.8V, voice prompts “Low battery,please replace all batteries” at each unlocking. Please replace all batteries immediately, and do not mix old batteries and new batteries together in replacement.

Replace Battery

1.5V AAAlkaline Battery is required.Total is 8 pcs, divided into 2 groups . One group is ok for power supply, two groups is used for longer time.

Extended Function(optional)

Access into master mode, press [4] for function extension, which is reserved for Z-Wave and another smart home interface. Please contact Kaadas distributor for more details.When closing the door, please mind the gap between door frame and Push-Pull handle. Do not jam your hand.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>