SUDOTACK KM300 Music Capsule User Manual
- June 15, 2024
- Sudotack
Table of Contents
SUDOTACK KM300 Music Capsule
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Thank you letter Dear Users,
Thank you for choosing Music Capsule, a karaoke speaker with four microphone
inputs, two wireless 2.4G microphones and two 6.35MM wired microphones
respectively. With four connection options of HDMI ARC/Coaxial/Bluetooth/Line
IN, the karaoke speaker easily connects to the latest and old version
TVs,which allows you to play backing tracks on your TV, transfer them to the
speaker, and watch the lyrics on your TV at the same time. This product is a
perfect solution to the problem of not being able to watch the lyrics while
you are singing. In addition to this, the Music Capsule’s two speakers are
rated at up to 30W, which is loud enough. It features a 20W 3.5-inch
standalone bass/midrange unit and a 10W 2.5-inch tweeter unit, which produces
clear and transparent accompaniment and vocals. To mellow the bass, we’ve
added two passive radiators on the left and right sides of the speaker, which
greatly multiply the bass effect of Music Capsule. Another highlight of the
speaker is that it features up to 9 RGB lighting effects, with a variety of
dynamic and static lights for an immersive visual experience during karaoke.
In addition, The Music Capsule is also equipped with practical features and
configurations such as accompaniment pitch adjustment, microphone independent
volume adjustment, rich scene sound effects, music only, bass enhancement, and
up to 4.5 hours of ultra-long battery life, aiming to better meet your singing
needs. We sincerely hope with the product, you can immerse yourself in
beautiful melody.
Important Safety Instructions
- Please read this manual carefully and comply with all instructions and terms of use, pay attention to all precautions.
- The speaker is not equipped with a USB charger, you need to use the USB adapter in strict accordance with the SUDOTACK regulations, the speaker maximum support input voltage of 5V, the current up to 1.4A, if your adapter output voltage and current exceeds 5V, 1.4A, the speaker will be forced to shut down protection, can not continue to work and use, at this time you should replace the adapter to meet the requirements of the use of this provision, the forced use of more than this voltage and current, serious will cause the speaker burned out. Forced to use more than this voltage and current adapter, serious will cause the speaker burned;
- The microphone is not equipped with a USB charger, you need to use the USB adapter in strict accordance with the SUDOTACK regulations, the microphone supports the highest input voltage of 5V, the current up to 1A, such as your adapter output voltage and current exceeds 5V, 1A, the microphone will be forced to shut down protection, can not continue to work, at this time, you should replace the adapter to comply with the provisions of the use. Forced use of adapters exceeding this voltage and current will seriously cause the microphone to burn out;
- Do not drop or hit the speaker and microphone, it will damage the cavity structure and iron mesh, affecting the sound quality;
- Do not place the product in a narrow space for use, such as bookcases or built-in cabinets;
- Do not use this product in water sources, humid and other environments, such as outdoor rainy days, or damp basements;
- Do not expose the product to liquid splashing, dripping areas, or place liquid-filled appliances on the product;
- Do not use the product in heat sources, high temperatures and other environments, such as near fire sources, sun-exposed areas, next to radiators, heaters and other equipment;
- Please try not to use the speakers and microphone in thunderstorms, and please unplug the USB charger to avoid high voltage lightning breakdown of the product circuit;
- When you go out or do not use this product for a long time, please unplug the USB charger to avoid fire;
- Do not place this product near strong magnetic or strong interference devices, such as cable concentration area, Wifi router, high voltage power supply, etc., or it may produce abnormal noise;
- Do not use any acidic/alkaline or corrosive cleaning agents to clean this product, which may cause irreversible damage to the appearance. When cleaning this product, it is recommended to gently wipe the body with a clean and soft cloth dipped in water;
- Do not block any ventilation openings, please do not cover the product with newspapers, curtains, tablecloths, etc. to avoid blocking the ventilation openings resulting in overheating of the fuselage, burning the product, or even causing a fire;
- Please protect the USB charging cable to avoid being stepped on and the cable being twisted and torn off;
- If you find the charger or body abnormalities, such as severe heat, odour and other problems, please immediately unplug the USB charger, cut off the power supply;
- As far as possible to use the machine attached and specified connection cable, the machine comes with a 0.8m USB C charging cable, 1.5m 3.5mm audio connection cable;
- Do not disassemble and repair the machine without authorisation, SUDOTACK will not be held responsible for any damage to the machine or fire.
WARNING! The maximum supported input voltage of this speaker is 5V, input
current is 1.4A; If you use other USB adapter over 5V 1.4A to charge this
speaker by yourself without authorisation, it may cause the machine to burn
and can’t be switched on, SUDOTACK will not be responsible for the
consequences.
WARNING! The highest supported input voltage of this microphone is 5V,
the input current is 1A; if you use other USB adapter over 5V 1A to charge
this microphone by yourself without permission, it may cause the machine
burned and can not be switched on, and the consequences will be borne by
yourself.
What’s in the box
Frontal Panel Functions Introduction
Product Buttons Function Instruction
Microphone buttons instuction
Speaker backside interface introduction
Bluetooth Connection
Step 1
Press ON/OFF button to turn on Music Capsule. The default mode is Bluetooth
mode. When Music Capsule is not connected to Bluetooth devices, the LED light
under the logo of Bluetooth will flash fast per 0.3s.
Step 2
In the case of LG TVS, Turn on the TV, press the setting button of the LG
remote control，and switch to the audio output mode through the arrow keys.
Step 3
Long press and hold the scroll wheel in the middle of the remote control for
3s to enter the Sound Out details setting page.
Step 4
Select the Device List button on the right side of Bluetooth.
Step 5
Click the “Search” button and search for Music Capsule, then choose to
connect. After successfully connecting, the upper right corner of the TV will
tell you that the Music Capsule is successfully connected.
Step 6
When the mobile phone is connected, turn on the Bluetooth of the mobile phone,
search for Music Capsule, and click to connect.
HDMI ARC Connection
Step 1
Insert one end of the HDMI cable into the Music Capsule HDMI ARC interface,
and the other end into the HDMI ARC/eARC interface of the TV.
Step 2
Long press and hold for 2 seconds to turn on the Music Capsule machine, short
press the Mode button after turning on the machine, and the white LED light
will jump to the HDMI ARC state.
Step 3
Take LG TV as an example, turn on the TV, short press the setting button of
the LG TV remote control, and select the Sound Out output.
Step 4
Long press and hold the scroll wheel in the middle of the remote control for
3s to enter the Sound Out details setting page.
Step 5
Select the HDMI ARC mode through the TV remote control, and the sound can be
returned to the Music Capsule through the TV.
Notice: If there is no sound or sharp and harsh abnormal noise when
connected in HDMI ARC mode, please adjust the audio output format of the TV to
PCM coded output, and turn off the default Dolby/DTS coded output of the TV
(different TV settings are different).
Line IN/AUX Connection
Step 1
Insert one end of the 3.5mm audio cable into the Line IN interface of the
Music Capsule, and the other end into the Line Out/AUX Out/Audio Out/Headphone
Out interface of the TV.
Notice: Please note that the Line Out/AUX Out/Audio Out/Headphone Out interfaces of the TV are all 3.5mm output interfaces, but the names are different. If it is a 3.5mm input interface and it is marked Debugging interface/Upgrade interface, the connection is invalid.
Step 2
Long press and hold for 2 seconds to turn on the Music Capsule machine, short
press the Mode button after turning on the machine, and the white LED light
will jump to the Line IN state.
Step 3
Take LG TV as an example, turn on the TV, short press the setting button of
the LG TV remote control, and select the Sound Out output.
Step 4
Press the remote control wheel for 3 seconds to enter the sound output mode,
and set the SOUND output mode of the TV to Bluetooth mode.
Step 5: Select Audio Out(Line out)via remote control, then the audio can be transmitted to Music Capsule.
RCA Connection
If your TV does not have 3.5mm interface such as Audio Out/Line Out/Headphone Out/AUX Out Etc.
Step 1
Please purchase the RCA male to 3.5mm female adapter separately, and insert
the 3.5mm audio cable into the 3.5mm female adapter; Then insert the red plug
of the adapter into the red RCA Out (L) interface of the TV, and insert the
white plug into the white RCA Out (R) interface of the TV; Insert the 3.5mm
plug at the other end into the Line IN interface of the Music Capsule.
Step 2
Take LG TV as an example, turn on the TV, short press the setting button of
the LG TV remote control, and select the Sound Out output.
Step 3
Press and hold the scroll wheel in the middle of the remote control for 3s to
enter the Sound Out details setting page.
Step 4
Select the RCA Out mode through the TV remote control, and the sound can be
transmitted from the TV to the Music Capsule.
Coaxial Connection
Step 1
Plug one end of coaxial cable to the Coaxial interface of Music Capsule. Plug
the other end of coaxial cable to Coaxial interface of TV.
Step 2
Hold the Music Capsule power button for 2s, and press Mode after the Music
Capsule is turned on. Ensure the white LED light is Coaxial status.
Step 3
Take LG TV as an example, turn on the TV, press the setting button of LG TV
remote. Select Sound Out.
Step 4
Press the remote control central wheel for 3s, enter Sound Out setting detail
page.
Step 5
Select Coaxial mode, then the Music Capsule will play TV sound.
USB Connection
- Press and hold for about 2s to open the Music Capsule, insert the USB flash disk drive which owns built-in audio files into the USB port of the Music
- Capsule, and the audio files will be played automatically.
- Notice: KM300 supports a USB flash disk with a maximum 32GB capacity. If the USB flash disk with a capacity exceeding 32GB capacity, it may not be recognized or cause other problems.
The file system of the USB/SD card storage device must be FAT16, FAT32, and exFAT
Troubleshooting
- Q) Why no sound comes out after connecting to the TV using ARC/Optical (Common)?
- A) Please make sure your TV supports HDMI ARC/Optical output. Then go to “setting” in your TV (may vary due to different brand):
- Setting § Sound § Select Speaker to: external speaker(HDMI ARC/Optical mode)/turn off TV Speaker;
- Setting § Sound(audio) § Advanced Audio § Digital Audio Output § PCM Setting § Sound(audio) § audio output format § Turn off PCM/Dolby Output. Please select the correct input mode.
- Q) Why watching Netflix, Disney+, Amazon prime has no sound or noise, some shows have sound on Smart TV?
- A) If your TV is a smart TV. Apps like Netflix was set default audio output is Dolby and DTS for the movie, but this speaker does no support Dolby and DTS, so you will hear the crack sound or no sound, please kindly disable the Dolby and DTS on Netflix.
- Q) Why my wireless device cannot connect to the speaker?
- A1) You have not enabled wireless on your device or the speaker.
- A2) Maybe someone else has connected to your speaker already, at this time, you need to long press the Play/Pause button on the speaker for 3s to disconnect the wireless connection by force.
- A3) When connecting wireless, try not to place routers and other devices next to the speaker.
- Q) Is this compatible with Fire TV/ Firestick?
- A) Yes, plug the Fire TV to the TV. And connect the TV using any input mode. If using HDMI ARC, please make sure you have followed our manual setting.
Technical Support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>