MIGHTYMAST 7FT REVOLVER Multi Games Table Instruction Manual
- June 13, 2024
- MIGHTYMAST
Table of Contents
7ft Multi games Table Incorporating Air Hockey,Pool & Table Tennis
PARTS IDENTIFIER
ASSEMBLY INSTRUCTIONS
WARNING: TWO ADULTS NEEDED ASSEMBLE POOL TABLE
Instructions before assembly :
-
After opening the box, remove the ice hockey platform (#2) from the back of the pool table and take out the parts box and the parts scattered on the back of the table.
Be careful to place the ice hockey table without damaging the fan on the back (#34). -
Lift the pool table (#1) and take out the parts and other items in the pool.
-
Count all the parts and quantities according to the parts list to prepare the assembly below.
INSTRUCTION FOR THE 7FT REVOLVER 3.1N-1MULTIGAMES TABLE
Please keep these instructions for future reference. Adult assembly required.
This table is not a toy & is intended for use by or under the supervision of
adults.
Tool required
Philips Screwdriver-not included
Standard( flat head ) Screwdriver-not included
Allen Key-included
Note: electric screwdrivers may be helpful during assembly however please
set a low torque & use extreme caution.
Assembly Tips
Make sure you understand the following before you begin to assemble your game
table.
- READ THIS MANUAL all the way through before beginning assembly.
- Some drawings or images in the manual may not look exactly like your product.
- you will need a second adult to assist with this assembly (indeally 4 adults needed for lifting).
- Save all packing materials until the parts have been inspected & the table is assembled
Unpack the pieces
- Lay the box a flat surface (the floor). You may want this near your area of assembly.
- Unpack the boxes & parts bags. inspect & count the parts. The parts identifier page can be uses to record your results.
- Some parts on the parts identifier page are pre-assembled.
- Not that some parts are stored inside the table top.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>