Dongguan Lingjie Electronics Technology M30T Wireless Mouse User Manual
- June 6, 2024
- Dongguan Lingjie Electronics Technology
Table of Contents
Dongguan Lingjie Electronics Technology M30T Wireless Mouse User Manual
Packing List
Basic Specification:
Mouse size:106.01×65.59×41.78mm
Mouse net weight:72.8g±5.0g
2.4G or BT3.0 mode: ●Windows XP ● Windows7 ● Windows8.1 ●Windows10 ●Mac OS X10.4 or above BT5.0 mode: ● Win8.1 ● Win10 ●Mac OS X10.4 or above
Diagram
- Left Button
- Right Button
- Scroll Wheel
- DPI Button
- Forward Button
- Backward Button
- Mode Switch Button
- USB Receiver (Stored in battery compartment)
- Switch
Mouse Features
- Multiple Modes to Switch, There are 2 modes as BT and 2.4G, which can separately connect to 2 devices. You can switch the mode via the bottom mode switch button.
- Bluetooth have two selections for supporting different SY5tems. It provides different devices with different choices of Bluetooth versions. Please select “B13.0 Mouse· for SY5tems that are backward compatible with Windows 7. Please select “BTS.O Mouse· for SY5tems that are upward compatible with Windows 8.
- The mouse is equipped with 3 DPI (7000/7500/7800) and the default setting is 7 B 00. You can switch them cyclically by pressing DPI button.
- Power Saving Mode, The mouse will enter into sleep mode if it’s unused for 30 min, and it can be woken up by pressing any button on it
- Forward and backward buttons are not available on Mac OS devices.
Instructions
First Use
- Put an AA dry cell into mouse with the correct polarity direction, and turn on the switch on it’s bottom.
- Long press the mode switch button for 3s, and the mouse will enter into Bluetooth pairing state after the indicator light turns to flash quickly.
- Turn on the Bluetooth on your laptop. Select “813.0 Mouse· if your computer SY5tem is Windows 7 or backward compatible with it Select “BTS,O Mouse· if your computer System is Windows 8 or upward compatible with it. The mouse is workable after the successful connection.
Mode Switch
2.4G Mode, Short press the bottom mode switch button to switch the mouse to 2.4G mode. and the indicator light will flash slowly. Plug the USB receiver in computer port and the mouse is workable after its paired with the computer automatically.
Solutions for 2.4G Connecting Problems Repeat the pairing steps after confirming that mouse is under in 2.4G mode. Press left button, right button and scroll wheel simultaneously for 3-5 seconds, and release them after the indicator light flashes quickly. Then plug USB receiver in computer port for pairing.
Solutions for BT Connecting Problems Reboot the mouse and empty the Bluetooth list on your computer. Repeat the connecting steps according to the instructions of BT connection.
Note
If the product is still not workable after above solutions. you could repeat
those steps for a few times. If your problem can’t get solved yet. please
contact our Customer Service for help.
FCC STATEMENT:
Operation is subject to the following two conditions,
- This device may not cause harmful interference. and
- this device must accept any interference received, including interference that may cause undesired operation.
- This device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without restriction.
Note, This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 75 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates.
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>