MIKY – 1x Rolna Singing Rock Instruction Manual
- October 30, 2023
- singing rock
Table of Contents
PULLEYS
MIKY – 1x Rolna
Instruction Manual
MIKY – 1x Rolna Singing Rock
TAB. 1| | | | |
---|---|---|---|---|---
product code| RK806| RK802| RK801| RK808| RK800
model name| MIKY| TWIN| EXTRA| EXTRA PLUS| SMALL
weight [g]| 105 g| 421 g| 257 g| 276 g| 92 g
dimensions [mm]| 76 x 55 x 34| 141 x 88 x 54| 117 x 88 x 28| 146 x 88 x 33| 76
x 34 x 36
break load [kN] max.| 28 kN / 2×14 kN| 36 kN / 4×9 kN| 32 kN / 2×16 kN| 32 kN
/ 2×16 kN| 22 kN / 2×11 kN
Working Load Limit [kN] max| 2 x 2,5 kN| 4 x 3 kN| 2 x 3 kN| 2 x 3 kN| 2 x 2,5
kN
point (B) max load [kN]| –| 12 kN| | 32 kN|
bearing type| self lubricating| ball bearing| ball bearing| ball bearing| self
lubricating
max rope diam. [mm]| 13| 13| 13| 13| 13
material| aluminum alloy, bronze, stainless steel| aluminum alloy, stainless
steel, plastic| aluminum alloy, stainless steel,
plastic| aluminum alloy, stainless steel, plastic| stainless steel
|
---|---
|
|
|
|
INSTRUCTIONS FOR USE
This product is personal protective equipment (PPE), protects persons against
the risk of falling from height and constitutes a part of a fall protection
system.
WARNING
Do not use this product before carefully read these instructions and
understanding them. If there are any problems with the use of this product or
if you do not understand these instructions, please contact SINGING ROCK.
Any activities at height are dangerous and may lead to injury or death. By
using this product you acknowledge all these risks and take personal
responsibility for any damage, injury or death that might be caused as a
result of using this product. If you are unable to assume responsibility for
these risks or if you do not understand these instructions, please do not use
this product.
Please use this product only under the conditions specified for its use, for
the intended purpose described in the instructions and according to the
pictures that are not crossed out. Any other use is prohibited and may cause
accidents or death. Please check whether this product is compatible with the
other items of equipment when assembled into a system. Using an unsuitable
combination of PPE in the securing chain may cause serious accidents and
injuries or death. Please try to use all the equipment in a safe place without
the risk of falling.
Check for potential risks in the workplace, such as running the rope over
sharp edges or objects, pendular movement during a fall, high and low
temperatures (use the product in temperatures ranging from -40 °C to 80 °C),
rain, frost cover, snow, mud, chemical agents, electrical conductivity, etc.,
which may affect safe use.
USE
An adequate apprenticeship in appropriate techniques and methods of security
is essential to use this product. The product must be only used by competent
person and responsible person or those placed under the direct visual control
of a competent and responsible person.
To start using pulley, put the rope through the pulley in the indicated
direction and attach it with a carabiner (fig. 3). For building hauling system
follow accompanying illustrations (fig. 9). Always use a carabiner with
locking mechanism, preferably oval shaped carabiner which do not cause
asymmetrical loading and deviation of pulleys (fig. 4). Pulleys are intendedto
be used with textile ropes.
BEFORE EACH USE, always verify that sheaves can easily turn and they
arnot worn out. Verify that the sheaves do not rub against the side plate.
Verifythe play of axle and deformation of the side plates. REPLACE the pulley
if opening and/or closing/locking of side plates and turning the sheave are
difficult. Take special care regarding the quality of the anchor points.
Checkpulley works correctly with given carabiner and rope.
DURING USE make sure that the individual system parts are in the proper
position and do not negatively influence or obstruct each other. Pay special
attention on the axle and ball/self-lubricating bearing, which has to be free
of dirt (soil, mud, gravel etc.), snow or ice.
ANCHOR DEVICES/POINTS (EN 795)
These devices and points must have sufficient strength (metal items at
least 12 kN and non-metal items at least 18 kN).
WARNING: The position of EN 795 anchor point must not put you at the risk
of a dangerous fall or collision with an obstacle and must be as high as
possible with regard to the user’s position.
STRENGTH (tab. 1, fig. 7)
The Working Load Limit (WLL) value is the maximal load which will not affect
the function of ball bearing and pulley (fig. 6).
WARNINGS: Avoid shock loads. Dynamic movements of the load and dynamic
forces from lifting effort can multiply the resulting force on anchor and
other elements of the system (fig. 8). Avoid catching hair, clothes and
fingers in the device.
NOMENCLATURE OF COMPONENTS (fig. 2)
- side plates
- sheave
- rivet
- ball bearing / self-lubricating bearing
MARKING (Fig. 10)
- producer
- model
- breaking load
- working load limit (WLL)
- max. rope diameter
- conformity marking
- no. of notified body shell carrying out conformity with type
- European standard
- datamatrix
- unique no.
- product code
- month and year of production
- read instructions
MAINTENANCE, CLEANING AND DISINFECTION
The product may be washed with “household-quality” clean water. If it is still
dirty after being washed or if you need to disinfect it, you can use lukewarm
water (up to 30 °C), and if necessary a soapy solution (ca. pH 5.5–8.5) may be
used. After that, the product must be washed in clean water and dried in
slightly heated, dark and well ventilated room, away from heat and UV
radiation sources. If a metal product is extremely dirty, a fine brush may be
used. Wiped with a dry cloth and dried away from direct heat sources. After
being cleaned and dried, metal components and especially their moving parts
can be lubricated with silicon oil.
TRANSPORT AND STORAGE
Keep the product in its original packaging and protect it from damage and
weather influences: direct sunlight (UV radiation), chemical agents,
corrosives, solvents (acids), corrosive environment (high salinity),
impurities (abrasives), moisture, high and low temperatures, sharp edges,
vibrations, etc. Do not store the product excessively twisted or compressed,
and never store it before drying it thoroughly.
LIFETIME AND INSPECTION
Lifetime of this product is not strictly limited by the manufacturer.
Depending on the condition of the product and its history it may be necessary
to retire it immediately (e.g. after hard fall, visible signs of damage, …).
Lifetime of this product can be influenced by various factors such as:
frequent or improper use, usage environment (humidity, dirt, ice), wear,
corrosion, excessive loading, exposure to heat sources, improper storage, etc.
WARNING: Bare in mind that after one single extreme event, your equipment
could result unsuitable for further use.
Deformation, corrosion and signs of considerable wear make it essentials to
replace the product immediately. As considerable wear, any reduction of
crosssection area higher than 5 % is intended. Do not hesitate to contact
SINGING ROCK in case of doubt. Any modification or repair outside the SINGING
ROCK production facilities is forbidden. SINGINGROCK recommends an inspection
by a competent person at least once every 12 months.
SINGING ROCK GUARANTEE:
3-year warranty covering material and manufacturing defects.
The warranty does not cover defects caused by usual wear and tear, negligence,
improper use, prohibited modifications and improper storage.
The EU declaration of conformity and up-to-date product related documents are
available at www.singingrock.com.
Reading and understanding instruction for use are required to use this
product.
3 years guarantee.
1019
EN 12278:07
EU declaration of conformity available on:www.singingrock.com
SINGING ROCK PRODUCT SEARCH AND LOOK-UP APP
Download and use the Singing Rock Product Search and Look-up app to find full
details of your Singing Rock equipment using its unique ID.
http://www.singingrock.com/papertrail
ver. 16R61690006 0122
SINGING ROCK s.r.o.
Poniklá 317 • 514 01 Poniklá • Czech Republic
Tel. +420 481 585 007 • email:
info@singingrock.cz
www.singingrock.com
singingrock.page
singingrock_official