CORNING 002T81 MIC Tight-Buffered Cable User Manual

: June 15, 2024
: Corning

Table of Contents

CORNING 002T81 MIC Tight-Buffered Cable
Product Information
Features and Benefits
Specifications
Documents / Resources

CORNING 002T81 MIC Tight-Buffered Cable

Product Information

Part Number: 002T81-31180-24

Features and Benefits

All-dielectric construction – Requires no grounding or bonding
Flame-retardant jacket – Rugged and durable

General Specifications

Environment : Cable
Type : Product Type Fiber
Category : Flame Rating
Application : Fiber Count

Standards

RoHS Approvals and Listings
Flame Test Method

Environmental Conditions

Temperature Range, Installation
Temperature Range, Operation
Temperature Range, Storage

Cable Design

Central Element Fiber Count
Outer Jacket Color
Outer Jacket Material
Tensile Strength Elements and/or Armoring – Layer 1

Mechanical Specifications

Max. Tensile Strength, Long-Term, 12F
Max. Tensile Strength, Long-Term, >12F
Max. Tensile Strength, Short-Term, 12F
Max. Tensile Strength, Short-Term, >12F
Min. Bend Radius Installation
Min. Bend Radius Operation
Nominal Outer Diameter

Optical Characteristics

Fiber Code
Fiber Type
Performance Option Code
Fiber Core Diameter
Minimum Effective Modal Bandwidth (EMB)
Maximum Attenuation
Min. Overfilled Launch (OFL) Bandwidth
Serial 1 Gigabit Ethernet
Serial 10 Gigabit Ethernet
Wavelengths
Fiber Category

Ordering Information

Product Number: 002T81-31180-24
EAN Code
Weight

Product Usage Instructions
To use the product, follow these steps

Make sure the product is installed in the appropriate temperature range for installation.
Connect the product to the desired application using the specified fiber count.
Ensure that the product meets the required flame rating for the intended environment.
If necessary, handle the product with care to avoid exceeding the maximum tensile strength limits.
When bending the product, maintain a minimum bend radius to prevent damage.
Operate the product within the specified temperature range for optimal performance.
If storing the product, keep it within the recommended temperature range for storage.

Note : Refer to the product manual for detailed instructions on specific installation and usage scenarios.

Part Number: 002T81-31180-24
Corning MIC® riser cables are designed for use in riser and general purpose environments for intrabuilding backbone and horizontal installations. These multifiber cables use 900 μm buffered fibers to enable easy, consistent stripping and facilitate termination. The fibers are surrounded by dielectric strength members and protected by a flame-retardant outer jacket. The all- dielectric cable construction requires no grounding or bonding, making these cables ideal for routing inside buildings including riser shafts, to the telecommunications rooms and workstations. The MIC Riser Cables meet the application requirements of the National Electrical Code® (NEC®) Article 770 and the ICEA S-83-596 test criteria. They are OFNR and FT-4 listed for riser and general-purpose use.

Features and Benefits

900 µm buffered fibers
- Easy, consistent stripping
All-dielectric construction
- Requires no grounding or bonding
Flame-retardant jacket
- Rugged and durable

Specifications

General Specifications

Environment| Indoor
Cable Type| Tight-Buffered
Product Type| Distribution
Fiber Category| 50 µm MM (OM3)
Flame Rating| Riser (OFNR)
Application| General Purpose Horizontal, Vertical Riser
Fiber Count| 2
Standards

RoHS| Free of hazardous substances according to RoHS 2011/65/EU
Approvals and Listings| National Electrical Code® (NEC®) OFNR, UL 1666, CSA FT-4, ICEA S-83-596
Flame Test Method| UL-1666 and CSA FT-4 (for riser and general building applications), ICEA S-83-596
Environmental Conditions

Temperature Range, Installation| -10 °C to 60 °C| (14 °F to 140 °F)|
Temperature Range, Operation| -20 °C to 70 °C| (-4 °F to 158 °F)|
Temperature Range, Storage| -40 °C to 70 °C| (-40 °F to 158 °F)|
Cable Design

Central Element| Yarn
Fiber Count| 2
Outer Jacket Color| Aqua
Outer Jacket Material| Flame-retardant
Tensile Strength Elements and/or Armoring – Layer 1| Dielectric strength members
Cable Design

Tight Buffer Color| Blue, Orange
Flame Rating| Riser (OFNR)
Mechanical Specifications

Max. Tensile Strength, Long-Term, ≤12F| 200 N (44.96 lbf)
Max. Tensile Strength, Long-Term, >12F| 400 N (89.92 lbf)
Max. Tensile Strength, Short-Term, ≤12F| 660 N (148.37 lbf)
Max. Tensile Strength, Short-Term, >12F| 1320 N (296.75 lbf)
Min. Bend Radius Installation| 64.5 mm (2.54 in)
Min. Bend Radius Operation| 43 mm (1.69 in)
Nominal Outer Diameter| 4.3 mm (0.17 in )
Optical Characteristics

Ordering Information
- Product Number
- 002T81-31180-24

Ordering Information

EAN Code| 4056418180762
Weight| 147 kg/km (98.78 lb./1000 ft.)

Corning Optical Communications LLC

4200 Corning Place
Charlotte, NC • 28216
United States 800-743-2675
FAX: 828-325-5060
International : +1-828-901-5000 www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks . All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified.

Documents / Resources

| CORNING 002T81 MIC Tight-Buffered Cable [pdf] User Manual
002T81 MIC Tight-Buffered Cable, 002T81, MIC Tight-Buffered Cable, Tight- Buffered Cable, Buffered Cable, Cable
---|---