FRIGIDAIRE FHWH082WA1 Room Air Conditioner User Manual

FHWH082WA1 Room Air Conditioner

Room Air Conditioner

use & care

Frigidaire.com USA 1-800-944-9044 Frigidaire.ca Canada 1-800-265-8352
use & care Room Air Conditioner
16120300A25752 (July 2019)

2 INTRODUCTION

Welcome to our family

Thank you for bringing Frigidaire into your
home! We see your purchase as the
beginning of a long relationship together.

This manual is your resource for the use and
care of your product. Please read it before
using your appliance. Keep it handy for
quick reference. If something doesn’t seem
right, the troubleshooting section will help
you with common issues.
FAQs, helpful tips and videos, cleaning
products, and kitchen and home accessories
are available at www.frigidaire.com.

We are here for you! Visit our website, chat
with an agent, or call us if you need help. We
may be able to help you avoid a service visit.
If you do need service, we can get that
started for you.

Let’s make it official! Be sure to register your
product.
Keep your product info here so it’s easy to
find.

Model Number ____
Serial Number ____
Purchase Date ____

3 IMPORTANT SAFETY INSTRUCTIONS

WARNING

For Your Safety
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance. Read product
labels for flammability and other warnings.

WARNING

Prevent Accidents

To reduce the risk of fire, electrical shock, or
injury to persons when using your air
conditioner, follow basic precautions,
including the following:

• Be sure the electrical service is adequate
  for the model you have chosen. This
  information can be found on the serial
  plate, which is located on the side of the
  cabinet and behind the grille.

• If the air conditioner is to be installed in a
  window, you will probably want to clean
  both sides of the glass first. If the window
  is a triple-track type with a screen panel
  included, remove the screen completely
  before installation.

• Be sure the air conditioner has been
  securely and correctly installed according
  to the separate installation instructions
  provided with this manual. Save this
  manual and the installation instructions for
  possible future use in removing or
  reinstalling this unit.

• When handling the air conditioner, be
  careful to avoid cuts from sharp metal fins
  on front and rear coils.

WARNING

Electrical Information

The complete electrical rating of your new
room air conditioner is stated on the serial
plate. Refer to the rating when checking the
electrical requirements.

• Be sure the air conditioner is properly
  grounded. To minimize shock and fire
  hazards, proper grounding is important.
  The power cord is equipped with a
  three-prong grounding plug for protection
  against shock hazards.

• Your air conditioner must be used in a
  properly grounded wall receptacle. If the
  wall receptacle you intend to use is not
  adequately grounded or protected by a
  time delay fuse or circuit breaker, have a
  qualified electrician install the proper
  receptacle.

• Do not run air conditioner without outside
  protective cover in place. This could result
  in mechanical damage within the air
  conditioner.

• Do not use an extension cord or an
  adapter plug.

WARNING

Avoid fire hazard or electric shock. Do not
use an extension cord or an adaptor plug.
Do not remove any prong from the power
cord.

4 IMPORTANT SAFETY INSTRUCTIONS

NOTE

The power supply cord with this air
conditioner contains a current detection
device designed to reduce the risk of fire.
Please refer to the section ‘Operation of
Current Device’ for details.
In the event that the power supply cord is
damaged, it cannot be repaired. It must be
replaced with a cord from the product
manufacturer.

SAFETY PRECAUTIONS

DANGER! Avoid Serious Injury or Death

• This air conditioner contains no
  user-serviceable parts. Always call an
  authorized Electrolux servicer for repairs.

• Do not insert or place fingers or objects
  into the air discharge area in the front of
  the unit.

• Do not start or stop the air conditioner by
  unplugging the power cord or turning o
  the power at the electrical box.

• Do not cut or damage the power cord.

• If the power cord is damaged, it should
  only be replaced by an authorized
  Electrolux servicer.

• In the event of a malfunction (sparks,
  burning smell, etc.), immediately stop the
  operation, disconnect the power cord, and
  call an authorized Electrolux servicer.

• Do not operate the air conditioner with
  wet hands.

• Do not pull on the power cord.

• Do not drink any water that is drained
  from the air conditioner.

SAFETY PRECAUTIONS

CAUTION! Avoid Injury or damage to the
unit or other property

• Provide ventilation per installation
  instructions.

• Do not direct airflow at fireplaces or other
  heat related sources as this could cause
  flare ups or make units run excessively.

• Do not climb on or place objects on
  outdoor part of the unit.

• Do not hang objects off the unit.

• Do not place containers with liquids on
  the unit.

• Turn off the air conditioner at the power
  source when it will not be used for an
  extended period of time.

• Periodically check the condition of the
  unit’s installation accessories for any
  damage.

• Do not apply heavy pressure to the
  radiator fins of the unit.

• Operate the unit with air filter in place.

• Do not block or cover the intake grille,
  discharge area and outlet ports.

• Ensure that any electrical/electronic
  equipment is one yard away from the unit.

• Do not use or store flammable gases near
  the unit.

• Do not touch the metal parts of the unit
  when removing the filter. Injuries can
  occur when handling sharp metal edges.

• Do not use water to clean inside the air
  conditioner. Exposure to water can
  destroy the insulation, leading to possible
  electric shock.

• When cleaning the unit, first make sure
  that the power and circuit breaker are
  turned off.

CAUTION

• This appliance is not intended for use by
  persons (including children) with reduced
  physical ,sensory or mental capabilities or
  lack of experience and knowledge, unless
  they have been given supervision or
  instruction concerning use of the
  appliance by a person responsible for their
  safety.

• Children should be supervised to ensure
  that they do not play with the appliance.

• If the supply cord is damaged, it must be
  replaced by the manufacturer, its service
  agent or similarly qualified persons in
  order to avoid a hazard.

• The appliance shall be installed in
  accordance with national wiring
  regulations.

5 PACKAGING & NORMAL SOUNDS

READ THIS SECTION BEFORE ATTEMPTING

TO OPERATE AIR CONDITIONER.

Unit must be upright for one hour prior to
operating.

Operation of Current Device

The power supply cord contains a current
device that senses damage to the power
cord. To test your power supply cord do the
following:

1. Plug in the Air Conditioner.

2. The power supply cord will have TWO
   buttons on the plug head. Press the TEST
   button. You will notice a click as the
   RESET button pops out.

3. Press the RESET button. Again you will
   notice a click as the button engages.

4. The power supply cord is now supplying
   electricity to the unit. (This is also
   indicated by a light on the plug head).

Plug in & press RESET

NOTE

• Do not use this device to turn the unit on
  or off.

• Always make sure the RESET button is
  pushed in for correct operation.

• The power supply cord must be replaced
  if it fails to reset when either the TEST
  button is pushed, or it cannot be reset. A
  new one can be obtained from the
  product manufacturer.

• If power supply cord is damaged, it
  CANNOT be repaired. It MUST be replaced
  by one obtained from the product
  manufacturer.

Packaging

Remove all packaging from inside the
carton, along with any inserts placed into
the side louvers.

Remove the plastic ties and foam pad that
secure the compressor to the fan shroud
(where applicable). See diagram.

6 NORMAL SOUNDS

1. Gurgle/Hiss
   “Gurgling or hissing” noise may be
   heard due to refrigerant passing
   through evaporator during normal
   operation.

2. Sound of Rushing Air
   At the front of the unit, you may hear
   the sound of rushing air being moved
   by the fan.

3. High pitched Chatter
   Today’s high efficiency compressors
   may have a high pitched chatter during
   the cooling cycle.

4. Vibration
   Unit may vibrate and make noise
   because of poor wall or window
   construction or incorrect installation.

5. Pinging or Swishing
   Droplets of water hitting condenser
   during normal operation may cause
   “pinging or swishing” sounds.
   Note: Don’t try to drill any holes on the
   base pan to eliminate the normal
   sounds, otherwise it will void the
   warranty.

7 AIR CONDITIONER FEATURES

Air Conditioner Features

ELECTRONIC CONTROL
Before you begin, thoroughly familiarize yourself with the control panel and remote as
shown below and all its functions, then follow the symbol for the functions you desire. The
unit can be controlled by the touch pad alone or with the remote.

A|

Turns Unit On Or Off

---|---
B| Eco Feature
C| Sleep Feature
D| Sets Mode
E|

Displays Temperature/time

F| Sets Fan Speed
G|

Check Filter Reset Button

H| Activates Timer
I|

Adjusts Temperature Or Time

REMOTE CONTROL

Light Feature:
The display and all LED indicators on the
control panel of the unit can be turned of
by pressing the “Light” button on the
remote control. If any other button of the
control panel and remote control is pressed
after that, the unit will beep to indicate it
works as the corresponding direction of
pressing specific button, and the display and
LED indicators will illuminate accordingly,
but they will turn of again in 5 seconds if no
further operation.
Press the “Light” button again or unplug the
unit to cancel this setting.

Battery Size: AAA
Warning: Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
Caution for ingestion. Keep out of the reach
of children.

8 OPERATING INSTRUCTIONS

NOTE

The following instructions represent the
touch pad. The same instructions can be
used for the remote control.

TO TURN UNIT ON:

NOTE: The unit will run in Cool mode with
Eco feature and Auto fan speed setting
when used for the first time. With the Eco
feature, when the room temperature is below
the set temperature, the fan will continue to
run for 3 minutes after the compressor shuts
of. The fan then cycles on for 2 minutes at 10
minute intervals until the room temperature
is above the set temperature, at which time
the compressor turns back on. Eco feature
can be activated or deactivated by pressing
Eco button, but it is invalid in fan only mode.

AUTO FEATURE:

YOU WILL SEE:

Note: This mode is a fixed combination of
Cool mode and Auto fan speed setting. In
this mode, the fan speed can not be selected
manually.

COOL FEATURE:

Note: In this mode, the fan remains on all the
time with the compressor cycling on and of
when room temperature is reached.

TO CHANGE TEMPERATURE SETTlNG:

9 OPERATING INSTRUCTIONS

YOU WILL SEE:

Note: Tap or hold either up (up) or down (down)
button until the desired temperature is seen
on the display. This temperature will be
automatically maintained anywhere between
62 °F (17 °C) and 86 °F (30 °C). If you want
the display to read the actual room
temperature. See “To Operate on Fan Only”
section.

TO ADJUST FAN SPEEDS:

Note: The fan speed can be selected among
four settings: Auto, Lo(Low), Med(Medium)
and Hi(High), unless the unit runs in “Auto”
or “Dry” mode, or the Sleep feature is
activated.

TO USE AUTO FAN FEATURE:

Note: Fan starts at Low Speed and adjusts
to a proper speed according to the room
temperature dictates. For example, if the
room doesn’t get too warm, it will stay at
the slowest speed. If the room temperature
rises quickly, such as a door being opened, it
will automatically go to the highest speed.
The fan speeds will re-adjust back to the
slowest speed as the room returns to the
original set temperature.

TO OPERATE ON FAN ONLY:

10 OPERATING INSTRUCTIONS

YOU WILL SEE:

Note: Use this function only when cooling is
not desired, such as for room air circulation
or to exhaust stale air on some models.
(Remember to open the vent during this
function, but keep it closed during cooling
for maximum cooling eciency.) You can
choose any fan speed you prefer.
During this function, the display will show
the actual room temperature, not the set
temperature as in the cooling mode.

DRY MODE:

Note: In this mode, the air conditioner will
work like a dehumidifier, but it will cool the
room down meanwhile. The temperature
can be adjusted between 62 °F (17 °C) and
86 °F (30 °C) and fan speed will be held at
“Lo”.

Note: In this mode, the unit will select Auto
fan speed automatically, and the selected
temperature will increase by 2 °F 30 minutes
after the mode is selected. The temperature
will then increase by another 2 °F after an
additional 30 minutes. This new temperature
will be maintained for 7 hours before it
returns to the originally selected
temperature. This ends the “Sleep” mode
and the unit will continue to operate as
originally programmed. The “Sleep” mode
program can be cancelled at any time
during operation by again pressing the
“Sleep”, “Fan speed” or “Mode” button.

CHECK FILTER FEATURE, YOU WILL SEE:

Note: This feature is a reminder to clean the
Air Filter (See Care and Cleaning) for more
efficient operation. The LED (light) will
illuminate after 250 hours of operation. To
reset after cleaning the filter, press the
“Filter Reset” button and the light will go off.

11 OPERATING INSTRUCTIONS

To delay stop(or start), press the Timer
button when the unit is power-on(or
power-off), then the “timer off” indicator(or
“timer on” indicator) will illuminate. Then
adjust timer setting, tap or hold the UP
arrow ( ) or the DOWN arrow ( ) to
change delay timer at 0.5 hour increments,
up to 10 hours, then at 1 hour increments up
to 24 hours. The setting will be confirmed
automatically in 5 seconds, then the control
will count down the time(8, 7.5, 7, etc.) left,
and all other settings will remain the same
as they were before the timer setting is
confirmed, until stop(or start).

Setting combination of “delay stop
delay start” or “delay start delay stop”
is workable. Both “timer off” indicator and
“timer on” indicator will illuminate then. The
timer setting can be canceled by either
pressing and holding the timer button for 2
seconds, or pressing the power on/off
button at any time to turn off the unit
directly.

Note: This feature can be used with any
combination of FAN Speeds (Low speed
only on 8000 BTU models), Timer, or Sleep
Modes. When in the “Heat” mode, the fan will
run continuously while heat is needed. The
temperature will automatically be
maintained anywhere between 55 °F(13 °C)
and 80 °F(27 °C) (The upper limit of
temperature could reach 86°F(30 °C) on
some of the 115V models.). When the room
set temperature is satisfied, the fan will
cycle off and on to circulate and sample the
room air.

12 OPERATING INSTRUCTIONS

TO CHANGE TEMPERATURE DISPLAY:

TO TURN UNIT OFF:

FAULT CODES:

If the display reads “HS”, ”AS”, ”ES”, ”CS” or
”OS”, a sensor has failed. Contact your
Authorized Frigidaire Service Center.

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating
procedure, here are more features in your
control that you should become familiar
with.

NOTE

The “Cool” circuit has an automatic 3
minute time delayed start if the unit is
turned off and on quickly. This prevents
overheating of the compressor and possible
circuit breaker tripping. The fan will
continue to run during this time.

• There is a 2-Second delay for the
  compressor shutting down when selecting
  FAN ONLY. This is to cover the possibility
  of having to roll through to select another
  mode.

• The control will maintain the set
  temperature within 2 degrees Fahrenheit,
  between 60°F and 90°F degrees.

• After a power outage, the unit will
  memorize the last setting and return the
  unit to the same setting once power is
  restored.

• The unit should be operated in a
  temperature range of indoor side 60°F –
  90°F (16°C – 32°C), outdoor side 64°F –
  109°F (18°C – 43°C). Performance may be
  reduced outside of these operating
  temperatures.

13 OPERATING INSTRUCTIONS

Fresh Air Vent Control (on some models)
The Fresh Air Vent allows the air conditioner
to:
1. Recirculate inside air – Vent Closed (see Fig. 1)
2. Draw fresh air into the room – Fresh Air (see Fig. 2)
3. Exchange air from the room – Vent Open (see Fig. 3)

Air Directional Louvers
Air directional louvers control air flow
direction. Your air conditioner has the louver
type described below.

Slider Type

The louvers will allow you to direct the air
flow Up or Down and Left or Right
throughout the room as needed. Drag the
adjuster tablet until the desired
Left/Right direction is obtained. Pivot
horizontal louvers until the desired
Up/Down direction is obtained.

14 CARE AND CLEANING & ENERGY SAVING IDEAS

Clean your air conditioner occasionally to
keep it looking new. Be sure to unplug the
unit before cleaning to prevent shock or
fire hazards.

Air Filter Cleaning

The air filter should be checked at least once
a month to see if cleaning is necessary.
Trapped particles in the filter can build up
and cause an accumulation of frost on the
cooling coils.

• Push the vent handle to the Vent Closed
  position(where applicable).

• Open the front panel.

• Grasp the filter by the center and pull up
  and out.

• Wash the filter using liquid dishwashing
  detergent and warm water. Rinse filter
  thoroughly. Gently shake excess water
  from the filter. Be sure filter is thoroughly
  dry before replacing.

• Or instead of washing, you may vacuum
  the filter clean.

NOTE: When replacing the air filter after
cleaning, make sure the tabs on the air filter
are on the upper part of filter, and placed
outward as shown in the drawing on the left
side.

Cabinet Cleaning

• Be sure to unplug the air conditioner to
  prevent shock or fire hazard. The cabinet
  and front may be dusted with an oil-free
  cloth or washed with a cloth dampened in
  a solution of warm water and mild liquid
  dishwashing detergent. Rinse thoroughly
  and wipe dry.

• Never use harsh cleaners, wax or polish on
  the cabinet front.

• Be sure to wring excess water from the
  cloth before wiping around the controls.
  Excess water in or around the controls
  may cause damage to the air conditioner.

• Plug in air conditioner.

Winter Storage

If you plan to store the air conditioner
during the winter, remove it carefully from
the window according to the installation
instructions. Cover it with plastic or return it
to the original carton.

Energy Saving Ideas

• Do not block air flow inside with blinds,
  curtains or furniture; or outside with
  shrubs, enclosures, or other buildings.

• The capacity of the room air conditioner
  must fit the room size for efficient and
  satisfactory operation.

• Install the room air conditioner on the
  shady side of your home. A window that
  faces north is best because it is shaded
  most of the day.

• Close the fireplace damper, floor and wall
  registers so cool air does not escape up
  the chimney and into the duct work.

• Keep blinds and drapes in other windows
  closed during the sunniest part of the day.

• Clean the air filter as recommended in the
  section “Care and Cleaning”.

• Proper insulation and weather stripping in
  your home will help keep warm air out and
  cool air in.

• External house shading with trees, plants
  or awnings will help reduce the air
  conditioner’s work load.

• Operate heat producing appliances such
  as ranges, washers, dryers and
  dishwashers during the coolest part of the day.

15 BEFORE YOU CALL

Before calling for service, review this list. It may save you time and expense. This list
includes common occurrences that are not the result of defective workmanship or materials
in this appliance.

Air conditioner will
not operate.|

• Wall plug disconnected. Push plug firmly into wall outlet.
• Plug Current Device Tripped. Press the RESET button.
• House fuse blown or circuit breaker tripped. Replace fuse with time delay
type or reset circuit breaker.
• Control is OFF. Turn Control ON and set to desired setting.

Air from unit does not
feel cold enough.|

• Room temperature below 60°F (16°C). Cooling may not occur until room
temperature rises above 60°F (16°C).
• Temperature sensing element touching cold coil, located behind air filter.
Straighten away from coil.
• Reset to a lower temperature.
• Compressor shut-off by changing modes. Wait approximately 3 minutes
and listen for compressor to restart when set in the COOL mode.

Air conditioner
cooling, but room is
too warm – ice
forming on cooling
coil behind
decorative front|

• Outdoor temperature below 60 F° (16°C). To defrost the coil, set FAN ONLY
mode.
• Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To
defrost, set to FAN ONLY mode.
• Temperature is set too low for night-time cooling. To defrost the coil, set to
FAN ONLY mode. Then, set temperature to a higher setting.

Air conditioner
cooling, but room is
too warm – NO ice
forming on cooling
coil behind
decorative front.|

• Dirty air filter – air restricted. Clean air filter. Refer to Care and Cleaning
section.
• Temperature is set too high. Set temperature to a lower setting.
• Air directional louvers positioned improperly. Position louvers for better air
distribution.
• Front of unit is blocked by drapes, blinds, furniture, etc. – restricts air
distribution. Clear blockage in front of unit.
• Doors, windows, registers, etc. open – cool air escapes. Close doors,
windows, registers, etc.
• Unit recently turned on in hot room. Allow additional time to remove
“stored heat” from walls, ceiling, floor and furniture.

Air conditioner turns
on and off rapidly.|

• Dirty air filter – air restricted. Clean air filter.
• Outside temperature extremely hot. Set FAN speed to a faster setting to
bring air through cooling coils more frequently.

Noise when unit is
cooling.|

• Air movement sound. This is normal. If too loud, set to lower FAN setting.
• Window vibration – poor installation. Refer to installation instructions or
check with installer.

Water dripping
INSIDE when unit is
cooling.|

• Improper installation. Tilt air conditioner slightly to the outside to allow
water drainage. Refer to installation instructions or check with installer.

16 BEFORE YOU CALL

Water dripping
OUTSIDE when unit is
cooling.|

• Unit removing large quantity of moisture from humid room. This is normal
during excessively humid days.

Remote Sensing
Deactivating
Prematurely (some
models).|

• Remote control not located within range. Place remote control within 20
feet & 120° radius of the front of the unit.
• Remote control signal obstructed. Remove obstruction.

Room too cold.|

• Set temperature too low. lncrease set temperature.
• Remote Sensing activated (on some models) and remote control located in
Hot Spot – Relocate remote control or deactivate remote sensing.

If These Solutions Fail, Call 1-800-944-9044(US)/1-800-265-8352(Canada)
For Frigidaire Service.

17 MAJOR APPLIANCE LIMITED WARRANTY

Your appliance is covered by a limited one-year warranty for functional repairs only. For one year from your
original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that
prove to be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions. After one year from your original date of purchase, the consumer
will be responsible for diagnostic, labor and parts costs as well as any removal, transportation and
reinstallation expenses which are incurred during service on components.

Exclusions

This warranty does not cover the following:

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.

2. Product that has been transferred from its original owner to another party or removed outside the USA or
   Canada.

3. Rust on the interior or exterior of the unit.

4. Products purchased “as-is” are not covered by this warranty.

5. Food loss due to any refrigerator or freezer failures.

6. Products used in a commercial setting.

7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
   not in ordinary household use or used other than in accordance with the provided instructions.

8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,
   etc., which are not a part of the appliance when it is shipped from the factory.

10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or
    knobs, handles, or other cosmetic parts.

11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
    charges, or mileage expense for service calls to remote areas, including the state of Alaska.

12. Damages to the finish of appliance or home incurred during installation, including but not limited to
    floors, cabinets, walls, etc.

13. Damages caused by: services performed by unauthorized service companies; use of parts other than
    genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
    external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE
YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX
SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE
AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR
ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF
IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY
FROM STATE TO STATE.

If You Need Service

Keep your receipt, delivery slip, or some other appropriate payment record to establish the
warranty period should service be required. If service is performed, it is in your best interest to
obtain and keep all receipts. Service under this warranty must be obtained by contacting
Electrolux at the addresses or phone numbers below.

This limited warranty only applies in the USA and Canada. In the USA, your appliance is warranted by
Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your
appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any
obligations under this warranty. Obligations for service and parts under this warranty must be performed by
Electrolux or an authorized service company. Product features or specifications as described or illustrated are
subject to change without notice.

USA
1.800.944.9044
Electrolux Major Appliances
10200 David Taylor Drive
Charlotte, NC 28262

Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4

Our home is your home. Visit us if you
need help with any of these things:

owner support
accessories
service

registration

(See your registration card
for more information.)

Frigidaire.com
1-800-944-9044
Frigidaire.ca
1-800-265-8352

References

• Kitchen, Laundry, Home Appliances & Accessories | Frigidaire
• Frigidaire

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>