MEMSChip IPISS Smart Diaper Cover Instruction Manual

June 15, 2024
MEMSChip

MEMSChip IPISS Smart Diaper Cover Instruction Manual
MEMSChip IPISS Smart Diaper Cover

Serial Bluetooth Terminal Setting

Serial Bluetooth Terminal is available for download in the Google Play store online.

  1. Install Serial Bluetooth Terminal at smart phone.
    Serial Bluetooth Terminal Setting

  2. Run the program (Serial bluetooth terminal)
    Serial Bluetooth Terminal Setting

  3. Power on temperature-humidity module (power switch button)

  4. Push the left icon(1) and then push the Devices button(2) % Execute Bluetooth pairing
    Serial Bluetooth Terminal Setting

  5. Push the Scan button(3), Scanning ….(4)
    Serial Bluetooth Terminal Setting

  6. Select FUS-****(device model name) and run the Edit button(5)
    Serial Bluetooth Terminal Setting

  7. Select Custom mode and set like the picture
    First : 331a36f5-2459-45ea-9d956142foc4b307
    Second : a73e9a10-628f-4494-a099-12efaf72258f
    Third : a9da6040-0823-4995-94ec-9ce41ca28833
    Serial Bluetooth Terminal Setting

  8. Push the (√) icon, and then select the model name(FUS-****)
    Temperature and humidity values are displayed on the screen of smart phone
    Serial Bluetooth Terminal Setting

This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

112 KETI, 25, Senari-ro, Bundang-gu Seongnum-Si, Gyeonggi-Do, KOREA, 13509
E-mail :sy8259km@naver.com www.memschip.kr
TEL : +80-70-4146-6259,
Fax : +82-31-703-6259

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals