FONESTAR BT Converter Multi Bluetooth Transmitter Receiver User Guide

FONESTAR BT Converter Multi Bluetooth Transmitter Receiver

Product Information

• Product Name: BT-CONVERTER-MULTI
• Type: Audio Receiver Transmitter

Features:

• Transmits audio from TV, computer, stereo, etc. to a headset, speakers, etc.
• Enhances the functions of old sound systems, allowing you to play music from your smartphone, tablet, or favorite device.
• Rechargeable Li-ion battery with a capacity of 350 mAh and voltage of 3.7V.
• Battery life of up to 14 hours at 50% volume. Charge time of 2 hours.

Product Usage Instructions

Transmitting Audio

1. Select the TX (transmitter) mode on the device.
2. Turn on the BT-CONVERTER-MULTI and make sure it is fully charged.
3. Ensure that the device you want to transmit audio from (TV, computer, stereo, etc.) is turned on and within range of the BT-CONVERTER-MULTI.
4. Press the LINK button twice on the BT-CONVERTER-MULTI to enter pairing mode.
5. Activate the pairing mode on the transmitting device.
6. Select the BT-CONVERTER-MULTI device from the list of available devices on the transmitting device.
7. Wait for the devices to connect. The status indicator on the BT-CONVERTER-MULTI will start flashing blue twice every 10 seconds if it is receiving audio.

Receiving Audio

1. Select the RX (receiver) mode on the device. Turn on the BT-CONVERTER-MULTI and make sure it is fully charged.
2. Ensure that the device you want to receive audio on (headset, speakers, etc.) is turned on and within range of the BT-CONVERTER-MULTI.
3. Press the LINK button twice on the BT-CONVERTER-MULTI to enter pairing mode.
4. Activate the pairing mode on the transmitting device (smartphone, tablet, etc.).
5. Select the BT-CONVERTER-MULTI device from the list of available devices on the transmitting device.
6. Wait for the devices to connect. The status indicator on the BT-CONVERTER-MULTI will start flashing blue twice every 10 seconds if it is receiving audio.

Note: For linking multiple transmitting devices, follow the steps provided in the user manual specific to your language.

AUDIO RECEIVER TRANSMITTER

DESCRIPTION

• As a transmitter, it sends the audio from the TV, computer, stereo, etc., to a headset, speakers, etc.
• As a receiver, it enhances the functions of your old sound system, you can play your favourite music from your smartphone, tablet or favorite device.
• Rechargeable Li-ion battery, 350 mAh, 3.7V
• Battery life: up to 14 h*. Charge time: 2 h
• Battery life at 50% volume.

CONTROLS AND CONNECTIONS

TX MODE (transmitter mode)

RX MODE (receiver mode)

The devices indicated in the pictures are examples of devices that can be connected. It is possible to connect other devices which don’t appear in the picture.

IMPORTAN

Perform a full charge prior to fi rst use.
While pairing keep transmitter and receiver close to each other.

To link 1 or 2 transmitting devices perform the following steps:

NOTE: you will only be able to send audio if two devices are connected. The other device will not be able to send audio until the fi rst device stops sending.

1. Select RX operating mode (receiver) and turn on the device. The indicator will start fl ashing blue and red.

2. Turn on the transmitting device you want to connect and activate its pairing mode.

3. Press the LINK button twice, select the BT-CONVERTER-MULTI device and wait for them to connect to one another.
   The status indicator will start fl ashing blue twice every 10 seconds if it is receiving audio, otherwise it will remain solid blue.

4. In order to connect a second device (transmitter), turn it on and activate its pairing mode.

5. Press the LINK button twice, select the BT-CONVERTER-MULTI device and wait for them to connect to one another.
   If audio is already connected, the status indicator will turn green and fl ash twice every 10 seconds in cyan colour, if  there is no audio it will remain solid cyan.

To link 1 or 2 receiving devices (both will receive the same audio) perform the following steps:

1. Select TX operating mode (transmitter) and turn on the device. The indicator will start fl ashing blue rapidly.
2. Turn on the receiving device you want to connect and activate its pairing mode.
3. Push the LINK button and wait for them to connect to one another. The status indicator will turn blue and fl ash once every 10 seconds, whether there is audio or not.
4. In order to connect a second device (receiver), turn it on and activate its pairing mode.
5. Push the LINK button and wait for them to connect to one another. The status indicator will turn green and fl ash once every 10 seconds in cyan, whether there is audio or not.

If you want to connect a new device and the BT-CONVERTER-MULTI connects automatically to previously used devices, it is necessary to clear the memory before connecting the new devices.

1. Switch off the BT-CONVERTER-MULTI.
2. Change the operating mode (TX to RX or RX to TX).
3. Switch the BT-CONVERTER-MULTI on and off.
4. And re-select the initial operating mode (TX or RX).

SIMPLIFIED EU DECLARATION OF CONFORMITY

FONESTAR SISTEMAS S.A. hereby declares that the audio transmitter and receiver BT-CONVERTER-MULTI type of radio equipment comply with the Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is available at the following internet address: fonestar.com/BT-CONVERTER- MULTI

www.fonestar.com

References

• BT-CONVERTER-MULTI
• Equipos de Megafonía y Sonido Profesional - Fonestar

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>