Govee H6178 RGB LED TV Backlight User Manual

June 5, 2024
Govee

Govee H6178 RGB LED TV Backlight

Govee H6178 RGB LED TV Backlight
product

Safety Instructions

Read and follow all the safety instructions:

  • The product is not water resistant, be cautious when installing and using.
  • Use the product with the provided power adapter only.
  • Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
  • When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s life span.
  • Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
  • Do not install the strip light near any heat sources.
  • Do not allow children to install the strip light alone.
  • Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-filled objects).
  • Unroll the strip lights before powering them on.

Introduction

Thanks for choosing the Govee RGB LED TV Backlights. This TV backlight is equipped with a 3m-length strip light. It is powered by a USB power supply port and supports app control.

What You Get

Govee H6178 RGB LED TV Backlight fig
16

At a Glance

Govee H6178 RGB LED TV Backlight fig 1

Installing Your Device

Before You Install

  1. Unpack the box and check all items listed in the packing list.
  2. Power on the strip light and check whether it lights up.

Installing Steps

  1. Wipe the surface to make sure it’s clean and dry.
  2. Peel off the protective film on the tape, stick the strip on and press over it firmly. 
  3. Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effect.
  4. Power on the strip lights and start using.

Pairing Your Device with the Govee Home App

Pairing Instructions

  1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
  2. Turn on Bluetooth on your smartphone.
  3. 0pen the app, tap the”+” icon in the top right corner and search for “H6178”.
  4. Tap the device icon and follow the on-screen instructions to complete pairing.  Govee H6178 RGB LED TV Backlight fig 6

Specification

Govee H6178 RGB LED TV Backlight fig 17

Troubleshooting

  1. The strip light flickers or the light is not bright enough.

    • Plug out the USB port and re-plug it in.
    • Power on the strip lights with a SV USB adapter.
      (Notice: The adapter is NOT included).
  2. The adhesive tape is not strong enough.

    • Make sure the installation surface is clean and dry.
    • Firmly press over the strip after sticking.
    • Reinforce the installation via more clips and tape.
  3. The control box doesn’t work.Re-plug in the USB port and try again.

  4. Cannot connect to Bluetooth

    • Do not skip Bluetooth connection in the app.
    • Make sure Bluetooth in your mobile phone has been
    • It may be caused by incompatibility between the phone system and the app. Please change to another mobile phone and connect again.
    • Re-power on the strip and re-turn on Bluetooth in your phone to try again.
    • Keep the distance between the strip and the phone less than 1 m/3.28ft while connecting.
    • Keep obstructions between the strip and the phone as few as possible.
  5. The strip doesn’t match the same color /Some lamp beads don’t light up. Please contact Govee support team in time for return

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com 
@Govee
@govee_official
@govee.official
@Goveeofficial
@Govee.smarthome

Compliance Information

EU Compliance Statement:
Shenzhen lntellirocks Tech Co. Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available on line at www.govee.com/

EU Contact address:

BellaCocool GmbH (E-mail: info@bellacocool.de) Pettenkoferstraße 18, 10247 Berlin, Germany

UK Compliance statement:

Shenzhen Intellirocks Tech. Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017
A copy of the UK Declaration of Conformity is available online at www.govee.com/

  Bluetooth ®
Frequen c y 2.4GHz
Ma x imum Po w er <10dBm

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points.With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry
Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ocCur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with a minimum distance 20cm between the radiator & your body,

Responsible party:

Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by
Shenzhen Intellirocks Tech. CO., Ltd. is under license.
Govee is a trademark of Shenzhen Intellirocks Tech Co., Ltd.
Copyright ©2021 Shenzhen Intellirocks Tech Co.,Ltd. All Rights Reserved.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals