Ningbo Choice Houseware CH1023 Portable Bluetooth Speaker User Manual
- June 15, 2024
- Ningbo Choice Houseware
Table of Contents
CH1023 Portable
Bluetooth Speaker
User Manual
Key function indication
Function
Bluetooth Mode | Radio Mode |
---|---|
Key M: Play/Pause | Key M: Automatically search channels |
Key “-“: Previous song | Key “-“: Previous channel |
Key “+”: Next song | Key “+”: Next channel |
Long press on “-“: Lower volume | Long press on “-“: Lower volume |
Long press on “+”: Raise volume | Long press on “+”: Raise volume |
LED light button: Strong/Weak/Flashing light | LED light button: |
Strong/Weak/Flashing light
AUX plays mode| TF Plays Mode
---|---
Key M: Pause or play speaker| Key M: Play/Pause
Key “±” (plus/minus): Short press ineffective| Key “-“: Previous song
Long press on “-“: Lower volume| Key “+”: Next song
Long press on “+”: Raise volume| Long press on “-“: Lower volume
LED light button: Strong/Weak/Flashing light| Long press on “+”: Raise volume
---|---
LED light button: Strong/Weak/Flashing light
USB Plays Mode| TF USB mixed Plays Mode
---|---
Key M: Play/Pause| Key M: Play/Pause
Key “-“: Previous song| Key “-“: Previous song
Key “+”: Next song| Key “+”: Next song
Long press on “-“: Lower volume| Long press on “-“: Lower volume
Long press on “+”: Raise volume| Long press on “+”: Raise volume
LED light button: Strong/Weak/Flashing light| LED light button:
Strong/Weak/Flashing light
Technical specification
Basic specific
Bluetooth name| SPEAKER
Product Type| Portable Bluetooth Speaker
storage type| TF card &U disk
power supply| Built-in 14500 3.7V/1200mAh battery
Working time 2-10H
charging time 4-5H
standby 10minutes
speaker| 1.8inches
power output| 5W 30
frequency range| 100Hz-20KHz
Bluetooth version| Blueteeth5.1
USB| support USB2.0
player MP3
play format| MP3:8Kbps-32Kbps
size| 159 X 68 X 68mm
N.W.| 290g ± 10g ( built-in battery included
Announcements
- Please read this instruction.
- Please read the instructions for the copy.
- Please store and use this product at room temperature.
- Do not use this product near sources of heat, such as radiators, heat regulators, stoves, or other instruments that generate heat (including amplifiers).
- Do not block the opening of the speaker and do not insert objects into the speaker’s ventilation holes or slots.
- Do not throw the product to avoid damage due to falling.
- Please use a charger with the rated voltage specified for the speaker to charge it.
- If the cable does not match your device, please contact the seller.
- Please adjust the speaker to an appropriate volume to avoid harm to your hearing.
- In case of any damage to the device, professional maintenance personnel should be consulted for repair promptly. Unauthorized disassembly will void the warranty.
- There is a risk of explosion if the battery is replaced improperly. Only batteries of the same type or equivalent type should be used for replacement.
- The battery (or battery pack or combination battery) should not be exposed to warning labels such as exposure to sunlight, heating, or similar overheating environments.
Bluetooth contact guide
-
Turn on the speaker
Press the power button to turn on the speaker. After the beep sound, the indicator light will blink and wait for Bluetooth pairing. -
contact to the mobile device
Turn on the Bluetooth option on your mobile device, find SPEAKER in the Bluetooth device list, and you will hear a tone when the connection is successful. At the same time, the blue LED indicator will be on. In the future, as long as you keep the Bluetooth option on your mobile device, it will automatically connect.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.