Sharkoon PureWriter RGB Keyboard User Manual
- June 8, 2024
- sharkoon
Table of Contents
Sharkoon PureWriter RGB Keyboard
General:
Key Properties:
Cable and Connectors:
Package Contents:
US Layout
Overview Lighting Effects
Lighting Effect| Effect Direction| Change of Color|
Frequency Change
---|---|---|---
Lighting Effect 1| left, right, up, down| Automatically| ü
Lighting Effect 2| N/A| Automatically| ü
Lighting Effect 3| left, right| Automatically| ü
Lighting Effect 4| N/A| Fn + Scroll Lock| ü
Lighting Effect 5| N/A| Automatically| ü
Lighting Effect 6| N/A| Automatically| ü
Lighting Effect 7| N/A| N/A| ü
Lighting Effect 8| N/A| Fn + Home| ü
Pulsating| N/A| Fn + Delete| ü
Color Change| N/A| N/A| ü
Permanent| N/A| Fn + End| N/A
Individual Color Settings
The settings of an individual color from the RGB spectrum only works with the
“Permanent” lighting effect. Therefore, first select “Permanent” lighting
effect. Press and hold the Fn key and then press twice the End key.
The “Permanent” lighting effect has seven preset colors (red, green, yellow,
blue, turquoise, pink and white), which can be access and cycled through by
repeatedly pressing the Fn + End key combination. The original color is
overridden.
To increase the red component of a color, press Fn + A and to reduce press Fn
- Z. Increase the green component with Fn + S, and reduce with Fn + X. The
blue component increases with Fn + D, and reduces with Fn + C. If the color
components can no further increase or decrease, the corresponding keys light
up in the respective color they control.
Lighting Profiles
To set up lighting profiles, press and hold the Fn key, and then press ESC.
The lighting profile keys F1 to F4 will start blinking. Now select a profile
by pressing the corresponding F-key; then press all the keys that should be
permanently illuminated. Press a key several times to change its illumination
color. Choose from red, green, yellow, blue, turquoise, pink and white. To
turn off the illumination on a particular key, cycle through all the colors
until the lighting goes out. While pressing and holding the Fn key, press the
ESC key to save the selected key illumination in the previously selected
lighting profile key. 
Legal Disclaimer
For potential loss of data, especially due to inappropriate handling, SHARKOON
assumes no liability.
All named products and descriptions are trademarks and/or registered
trademarks of the respective manufacturers and are accepted as protected. As a
continuing policy of product improvement at SHARKOON, the design and
specifications are subject to change without prior notice. National product
specifications may vary.
All rights reserved especially (also in extracts) for translation, reprinting,
reproduction by copying or other technical means. Infringements will lead to
compensation. All rights reserved especially in case of assignation of patent
or utility patent. Means of delivery and technical modifications reserved.
Disposal of your old products
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product, it means
the product is covered by the European Directive 2012/19/EU.
Please be informed about the local separate collection system for electrical
and electronic products. Please act according to your local rules and do not
dispose of your old products with your normal household waste. The correct
disposal of your old product will help prevent potential negative consequences
to the environment and human health.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>