EARNSHAW ES-0032-01 LONGCASE Analog Display Swiss Automatic Black Watch Instruction Manual
- June 4, 2024
- EARNSHAW
Table of Contents
EARNSHAW ES-0032-01 LONGCASE Analog Display Swiss Automatic Black Watch
Instruction Manual
Congratulations on your purchase of this finely crafted Earnshaw Timepiece.
MECHANICAL AUTOMATIC 2 HANDS AND 3 HANDS WITH DATE
This timepiece is equipped with a self-winding Mechanical Automatic movement.
It does not need a battery. It is powered by the motions of the user’s own
wrist during the wear of the watch. You may also choose to wind the watch
manually.
For more details on operating this timepiece please refer to the enclosed booklet or visit:
DISPLAY
WINDING THE MAINSPRING
Automatic winding watch can be hand wound by turning the crown in it’s normal crown position. Wind 5-10 times and it will start to move naturally after shaking slightly.
TIME SETTING
- Pull out the crown to the position 2.
- Turn the crown to set the hour and minute hands.
- Push the crown back to position 0.
DATE SETTING
- Before setting the date, be sure to set the time.
- Pull out the crown to the position 1.
- Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown for the desire date.
- After setting, push the crown back to position 0.
NOTE:
This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is
fully wound. An automatic watch will only wind when the watch is on your wrist
and your arm moves.
Winding the watch by the crown will put power on the spring but not enough to
allow the watch to function fully.
If your watch stops overnight or loses time it means it is not being fully
wound.
WATER RESISTANCE
The water resistance indicated on your timepiece serves only as a guide. Actual water resistance may vary depending on a number of important factors including temperature, water salinity, and actual use under water.
The water resistance of your timepiece may eventually be compromised over time with general wear and tear and the use of your watch under adverse conditions.
Always remember to employ the screw down crown (if available) to maintain the water resistance of your timepiece. Warranty may be voided if the screw down crown has not been properly employed.
The water resistance indicated on your timepiece serves only as a guide. Actual water resistance may vary depending on a number of important factors including temperature, water salinity, and actual use under water.
The water resistance of your timepiece may eventually be compromised over time with general wear and tear and the use of your watch under adverse conditions.
Always remember to employ the screw down crown (if available) to maintain the water resistance of your timepiece. Warranty may be voided if the screw down crown has not been properly employed.
You are now the owner of a timepiece that draws its roots from the renowned English horologist, clock and watch maker Thomas Earnshaw 1749 – 1829
QR Code:
Documents / Resources
|
EARNSHAW ES-0032-01 LONGCASE Analog Display Swiss Automatic Black
Watch
[pdf] Instruction Manual
ES-0032-01, LONGCASE Analog Display Swiss Automatic Black Watch, ES-0032-01
LONGCASE Analog Display Swiss Automatic Black Watch, Analog Display Swiss
Automatic Black Watch, Display Swiss Automatic Black Watch, Automatic Black
Watch, Watch
---|---