UAG-BTKB-02-EN UAG Bluetooth Keyboard with Trackpad User Manual
- June 15, 2024
- uaG
Table of Contents
UAG-BTKB-02-EN UAG Bluetooth Keyboard with Trackpad
FOR APPLE IPAD 10.9” (10TH GEN)
- MODEL: UAG-BTKB-02-EN
INTRODUCTION
The UAG Bluetooth Keyboard with Trackpad offers 360° unstoppable protection. Utilizing a rugged, non-slip exterior, the keyboard represent’s UAG’s commitment to protection. With Bluetooth connectivity, the keyboard offers superior laptop-style typing experience, tracking and spill resistance. Low power Bluetooth connectivity keeps your keyboard running longer on a single charge.
FEATURES
- 4ft drop protection
- Antimicrobial exterior
- Trackpad with multi-touch
- Spill-resistant keyboard
- Built-in protective case
- Hinged stand with multiple viewing angles
- Secure multi-device paring (up to 2 devices)
- USB-C charging
- Sleep/wake function
- Dedicated multi-media keys
COMPATIBILITY
- iPad 10.9” (10th Gen) Please visit www.urbanarmorgear.com for the latest information and compatibility information.
SPECIFICATIONS
- Bluetooth version: 5.1
- Power Input: 5V DC, 180mA
- Power Connection: USB-C
- Charge time: ~1.5 hour
- Battery Capacity: 3.7V DC, 250mAh Operating Frequency Range Bluetooth 2402 – 2480MHz
- Maximum RF Output Power: -2.64dBm
- Caution: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
PACKAGE CONTENTS
- Bluetooth Keyboard with trackpad
- Built-in Protective Case
- USB-C charge cable
- User’s Manual
CASE INSTALLATION
- Place your case on a flat surface.
- Align your device’s camera with the camera opening on the case.
- Insert your device at an angle starting at the top (camera side).
- Let your device rest on the bottom of the case and gently press it down into the case.
- Press around all the edges to ensure your device is installed properly in the case.
VIEWING ANGLE ADJUSTMENT
The Bluetooth Keyboard features a built-in hinge that works together with the
cover-stand to create multiple viewing angles. To adjust the viewing angle,
hold the top edge of the tablet case and use your other hand to adjust the
hinged stand to the desired angle.
POWERING YOUR KEYBOARD
Ensure your keyboard has been charged using the included USB-C charging cable
and a compatible USB-C 5V charger (not included). You can also charge your
keyboard from a compatible USB-C port on a computing device.
TO POWER ON
Locate the Power key on the top right corner of your keyboard. Press and hold
the Power key for 1 second until the power LED lights up solid, then release.
TO POWER OFF
Press and hold the Power key for 3 seconds. The power LED will flash 3 times,
indicating the keyboard has been powered off.
STANDBY MODE
Your keyboard will go into Standby mode after 40 seconds of inactivity. Press
any key to wake it.
PAIRING YOUR KEYBOARD
The Bluetooth Keyboard can pair with up to 2 devices. Once paired, you can
easily toggle between devices by pressing the Bluetooth 1 and Bluetooth 2 keys
on the keyboard. To pair, follow the instructions below.
- Ensure your device’s Bluetooth connection is enabled.
- Press and hold the or key for 3 seconds. Release the key after the LED on the Power key begins flashing rapidly. Your keyboard is now in pairing mode.
- Go to your device Bluetooth settings and search for “UAG Keyboard 0XXXX”. The last four digits should coincide with the digits listed on the white label located to the left of the track pad.
- Select the appropriate keyboard on your Bluetooth device list.
- You will immediately be prompted to enter a security passkey.
- Key in the corresponding 4-digit passkey on your UAG Bluetooth keyboard followed by the Return or Enter key.
- Your Keyboard should now be paired and connected with your device.
- Repeat the steps above to pair a second device or if the pairing process fails.
BATTERY LIFE CHECK
Press fn + “B” key. This will cause the LED indicator on the Power key to
flash one of the following ways:
- Four flashes = ~ 80% – 100% battery life.
- Three flashes = ~60% – 79% battery.
- Two flashes = ~35% – 59% battery.
- One flash = low battery <34%
To help preserve battery life, your Bluetooth Keyboard will enter sleep mode if left on and not used for several minutes; press any key to wake it.
FUNCTION KEYS
- POWER: Turns your keyboard on/off. Hold for 1 second to power ON, 3 seconds to power Off.
- CAPS LOCK: Activates the Caps Lock feature. When Caps Lock is on, an indicator light will remain lit until it is turned off. To turn Caps Lock off, press Caps again.
TRACKPAD
The Trackpad supports most common Multi-Touch gestures including:
- Swipe
- Tap
- Pinch
- Scroll
1 YEAR LIMITED WARRANTY
For warranty terms and conditions visit urbanarmorgear.com/warranty or call
(833)984-2UAG For latest install guide and addtional help, scan QR code or
visit urbanarmorgear.com/install
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ICES-003 Class B Notice – Avis NMB-003, Classe B This Class B digital apparatus complies with Canadian ICES-003.This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
- O stands for this toxic and hazardous content in homogeneous material is under the SJ/T11363-2006 Standards limits.
- X stands for this toxic and hazardous content in homogeneous material is beyond the SJ/T11363-2006 Standards limits Under the ingredients with ‘X’ in the form all are up to ROHS; “on 27 January 2003 the European parliament and the council announce electronic equipment in limiting the use of certain hazardous substances directive 2002/95 / EC”
Note: the environmental protection using period reference standard depends on the product of the regular work temperature and humidity conditions.
- *iPad and Apple Pencil not included Apple®, Apple Pencil®, and iPad® are registered trademarks of Apple Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Urban Armor Gear is under license. PATENTS PENDING ©2023 URBAN ARMOR GEAR. All rights reserved. URBAN ARMOR GEAR® and UAG® logo are registered trademarks of URBAN ARMOR GEAR. LLC., Laguna Niguel, CA. All other trademarks and registered trademarks are the property of their respective owners.
DECLARATION OF CONFORMITY
Hereby, Urban Armor Gear, LLC declares that the device is in compliance with
Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of
conformity is available at the following internet address
https://www.urbanarmorgear.com/EU-DOC Urban Armor Gear, LLC 1601 Alton Parkway, Suite C, Irvine, CA 92606 Made
in China
MODELS:
- 124412114031
- 124412B14031
- 124421114031
- UAG-BTKB-02-JP
- UAG-BTKB-02-UK
- UAG-BTKB-02-FC
References
- How to Install Your Gear in Their New UAG Case
- Warranty Information
- Rugged Cases & Mobile Accessories Built for You To Go Further | UAG
- EU Document of Conformity