UAG-WF-BP5K Wireless Power Bank User Guide

June 3, 2024
uaG

UAG-WF-BP5K Wireless Power Bank

UAG-WF-BP5K-Wireless-Power-Bank-product-img

PACKAGING

  • 114013BW4040
  • 114023BW4130
  • 114015BW4040
  • 114025BW4130

DATE 0822
VERSION 1

NOTES
Size: 165 x 85mm

SPECIFICATIONS

  1. Battery capacity 3,000mAh (11.1Wh) Lithium Polymer 5,000mAh (19Wh) Lithium Polymer
  2. Battery charging input, 10-Watt, 5V/2A max
  3. Battery wireless charging output **** 10-Watt (Wireless)
  4. Wireless Status Indicator 1x Blue LED
  5. Battery Indicator 4x White LED
  6. Operating Environment 0C to +40C (32°F to 104°F) 5% to 90% Relative Humidity
  7. Storage Environment -15C to +50C (-59°F to +122°F) 5% to 90% Relative Humidity

BATTERY PACK INSTALLATION

  1. To install the battery pack, insert the battery pack at an angle starting at the bottom.
  2. Let battery pack rest on the bottom of the case and gently press the top down into the case until it snaps in place.
  3. To remove the battery pack. Push the battery release button up and pull the battery pack away from the case.

BATTERY PACK CHARGING

Charge the battery pack using a USB-C cable (not included). You may also charge the battery using the optional Workflow Charging Dock

BATTERY PACK OPERATION

  1. Press the battery button once to power on the battery pack and enable device charging.
    Press once to check battery charge status

  2. Press the battery button twice to power off the battery pack.

LED INDICATORS

  • Blue LED – Wireless charging indicator. Solid if charging
  • White LED – (4) Battery charge status indicators
  • 10%-25% charge
  • 26%-50% charge
  • 51%-75% charge
  • 75%-100% charge

1 YEAR LIMITED WARRANTY

For warranty terms and conditions visit urbanarmorgear.com/warranty
Urban Armor Gear, LLC 1601 Alton Parkway, Suite C, Irvine, CA 92606
Made in China

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 0 cm surrounding the device and O cm above the top surface of the device must be respected.

ICES-003 Class B Notice – Avis NMB-003, Classe B

This Class B digital apparatus complies with Canadian ICES-003

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device

WARNING: This Product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm.
wwwP65Warnings.ca.gov
PATENTS PENDING ©2022 URBAN ARMOR GEAR. All rights reserved. URBAN ARMOR GEAR® and UAG® logo are registered trademarks of URBAN ARMOR GEAR. LLC., Laguna Niguel, CA. All other trademarks and registered trademarks are the property of their respective owners

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

uaG User Manuals

Related Manuals