CORNING 95-05X-KY Secure Keyed LC Connector Owner’s Manual

: June 15, 2024
: Corning

Table of Contents

CORNING 95-05X-KY Secure Keyed LC Connector
Product Information
Product Specifications
Product Usage Instructions
Features and Benefits
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CORNING 95-05X-KY Secure Keyed LC Connector

Product Information

Part Number: 95-05X-KY

Features and Benefits:

Keyed connector solution
Front and rear security in network panel
Eight color-coded mechanical key positions
Prevents mismatch of networks
Factory-polished end face
Consistent optical performance
Fast termination and no consumables
Low installation cost
Minimum insertion loss
Optimum optical performance

Product Specifications

General Specifications:

Fiber Category: Corning Logo Keyed (security) Technology
Standards: RoHS Approvals and Listings
Environmental Conditions: Temperature Range, Operation

Design – Connector:

Connector Type: LC
Housing Color: Yellow
Boot Color: Yellow
Ferrule Material: Ceramic

Mechanical Specifications – Connector:

Free of hazardous substances according to RoHS 2011/65/EU
Passed EIA/TIA 568-B.3

Optical Specifications – Connector:

Insertion Loss, Max.: 0.75 dB
Insertion Loss, Typical: 0.3 dB

Ordering Information:

Product Number
EAN Code
Packaging
Package Contents
Units per Delivery

Product Usage Instructions

To use the 95-05X-KY keyed connector solution, follow these steps:

Select the appropriate color-coded mechanical key position to match your network requirements.
Ensure that the front and rear security in the network panel is properly aligned.
Connect the LC connectors by inserting them into the corresponding ports.
Make sure the housing color and boot color are both yellow foreasy identification.
Verify that the ferrule material is ceramic for consistent optical performance.
Terminate the connectors quickly without the need for consumables, reducing installation costs.
Ensure minimum insertion loss to achieve optimum optical performance.

Note: Please refer to the product manual for additional information and guidelines on usage.

UniCam® Secure Keyed LC Connector, 50 μm multimode (OM3/OM4/OM4 extended 10G distance) Yellow

Part Number:
95-05X-KY
Corning secure keyed LC connector solution offers mechanical network security for organizations desiring to segregate networks due to privacy or security concerns. Utilizing the LC small-form-factor (SFF) format for optical fiber cabling, the keyed LC solution provides physical separation for up to eight networks, applications, or organizations. Eight color-coded key combinations prevent inadvertent or unauthorized access to networks and provide fast and easy network identification. Keyed connectors on the front and back of the patch panel area are used to match access rights to the proper network. The keyed features cannot be duplicated with standard LC components, thereby preventing violation of network security.

Features and Benefits

Keyed connector solution
Front and rear security in network panel
Eight color-coded mechanical key positions
Prevents mismatch of networks
Broad operating temperature range (-40°C to +75°C)
Utility and flexibility
Factory-polished end face
Consistent optical performance
Fast termination and no consumables
Low installation cost
Minimum insertion loss
Optimum optical performance

UniCam® Secure Keyed LC Connector, 50 μm multimode (OM3/OM4/OM4 extended 10G distance), yellow

Product Specification 95-05X-KY_NAFTA_AEN

Specifications

General Specifications

Fiber Category| 50 µm MM (OM3/OM4/OM4+)
Product Type| Field-Installable Connectors
Corning Logo| Yes
Keyed (security)| Yes
Technology| No-Epoxy/No-Polish
Standards

RoHS| Free of hazardous substances according to RoHS 2011/65/EU
Approvals and Listings| Passed EIA/TIA 568-B.3

Environmental Conditions

Temperature Range, Operation: -40 °C to 75 °C (-40 °F to 167 °F )

Design – Connector

Connector Type| LC
Housing Color| Yellow
Boot Color| Yellow
Ferrule Material| Ceramic
Mechanical Specifications – Connector

Nominal Fiber Outer Diameter| 125 µm
Tensile Strength Jacketed Cable| 50 N (11.24 lbf)
Durability| ≤ 0.2 dB change, 500 rematings, FOTP-21
Tensile Strength 900 µm Cable| 4.9 N (1.1 lb) change ≤ 0.2 dB, FOTP-6

UniCam® Secure Keyed LC Connector, 50 μm multimode (OM3/OM4/OM4 extended 10G distance) Yellow

Optical Specifications – Connector

Insertion Loss, Max.| 0.75 dB
Insertion Loss, Typical| 0.3 dB
Ordering Information

Product Number| 95-05X-KY
EAN Code| 4056418200132
Packaging| Individual Pack

Package Contents

| “Keyed connector, trigger, crimp band, boot (900 µm), boot (3.0 mm), boot (2.0 mm)”
Units per Delivery| 1/1

Corning Optical Communications LLC
4200 Corning Place
Charlotte, NC
28216
United States
800-743-2675
FAX: 828-325-5060
International: +1-828-901-5000
www.corning.com/opcomm.

a complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2023 Corning Optical Communications. All rights reserved.