boAt PB300 Energyshroom Power Bank User Manual
- June 13, 2024
- Boat
Table of Contents
boAt PB300 Energyshroom Power Bank
Thank you for choosing EnergyShroom PB300 Power Bank by boat to power up your cherished devices. It is a high-capacity, 10000mAh portable charging device that utilizes a Li-lon polymer battery and is built for a safe, fast and efficient user experience. It charges your beloved devices such as cell phones, tablets, MP3 players, and digital cameras. etc. It has both Micro USB and Type C (2-way) input interfaces and 2 USB-A & 1 Type C (2-way) output interfaces to make for smoother connectivity.
Contents
- Ix Energy Shroom P8300
- Ix Type C Cable
- Ix Manual
- Ix Warranty Card
Product Overview
Features
- Supports Micro USB as well as Type C (2-Way) charging Input ports along with 2 USB-A and a Type C (2-Way) Output ports.
- But-n laver Smart c protection tom short circuit. over charge d over discharge.
- intelligent input/output control and LEDino cators
- Supports 2-way 22.5W(Max) fast charging including Quick Charge 3.0, Power Delivery and PPS protocol support.
- Ultra-portability and Durability including High Temperature and scratch Resistance wih seek Nunnum casing
- Pass-through charging allows charging the power bank while it charges your devices.
LED Functions
- Press the power button once to switch the LED indicator on and see the charging status of the power.
1 LED In Solid light | 0-25% |
---|---|
2 LED in solid light | 25-50% |
3 LED in solid light | 50-75% |
All LED solid llght | 75-100% |
- The LED indicator will turn on to indicate the battery status of the power bank
- When your power bank or device uses Quick Charge 3.0, Power Delivery or PPS fast charging/discharging, the top LED indicator will turn green
Button Functions
- Press the power button once to switch the LED indicator on and see the power bank’s charging status.
- To switch the LED off, press the power button twice.
- Press and hold the power button to stop the poThe werbank from charging your device, press it once again to continue charging.
Charging EnergyShroom PB400
- Connect the Micro-USE/ Type-C connector to the Micro-USB/ Typ: C port of the power bank.
- Then, connect the USB-A/ Type-C connector to the adaptor or laptop/computer US8 port.
- An LED will blink to indicate charging depending on the battery of the power bank. All 4 LEDs will light up when the power bank is fully charged.
- If you are charging your power bank with a compatible Quick Charge 3.0, Power Delivery, or PPS fast charger, the top LED indicator will turn green.
Note : Computer USB port output is less than the wall adapter.
Charging Your Devices
- Please connect the device to the power bank using the USB-A/ Type C connector for charging
- case the power bank doesn t start automatically singk press the power button to bean Charen
- If your device supports Guidoesck Charce 30, Power Delivery or PPS Tast chafer which chorea your devices, the top Lew indicator vall turn 91001
- When held down, the power button stops any device charging taking
Note : If you are charging your device and power bank at the same time using the Pass-through charge-discharge feature, it will result in slower charging and discharging speed
Charging norms & Precautionary Guidelines
- Charger/Brick Adaoter 5V/2A
- Cable/Wire : Standard Cable (35 strands a 0,10mm diameter/ stran Any other accessory can be paired up with the product as fork as the specifications are as per the above notice
Product Specification
Important User Instructions
- Please utlize our standard Type C charging cable to charge the device.
- It is recommended to charge the power bank fully before its first use.
- Do not leave the power bank inside the car lying unattended.The product should be safeguarded against any physical shock or vibration.
- Keep out of reach of children.
- If the power bank gets discharged completely, make sure to quicidy put into chort
- Do not leave the battery on charge for over 24 hours.
- Charging current and voltage should not exceed the maximum specified amount.
Warning
- Do not put this product in water, exposed to fire or direct sunlight.
- Do not use the product around combustible gas. It may catch fire and/or cause burns.
- Do not disassemble or attempt to replace the Li-polymer battery under any circumstance, as it may damage the device permanently.
E-Waste Management
As per government rules, all E- waste are to be managed by effective treatment under specialized methodologies prescribed by the Govt. of Do not dispose of the product as unsorted municipal waste, The waste wil be treated as per the norms set by the pollution control board. Please contact customer care for getting guidance on proper disposal of this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>