LOOKMINT BHSG-02 Jellyfish Bluetooth Audio User Guide
- July 26, 2024
- LOOKMINT
Table of Contents
LOOKMINT BHSG-02 Jellyfish Bluetooth Audio
Specifications
- Compliance: Part 15 of FCC Rules
- Conditions: The device must not cause harmful interference
Product Usage Instructions
Setting Up the Device
To begin using the product, follow these steps:
- Unbox the device and check for all the components.
- Connect the device to a power source using the provided cable.
- Turn on the device by pressing the power button.
Operating the Device
Once the device is set up, you can use it for various purposes:
- Follow the on-screen instructions to navigate through different modes.
- Adjust settings using the control panel or remote control, if applicable.
- Refer to the user manual for specific functions and features.
Maintenance and Care
Proper maintenance ensures the longevity of the product:
- Regularly clean the device with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or moisture.
- Store the device in a safe place when not in use.
FAQ
- Q: What should I do if the device causes interference?
- A: If you experience harmful interference, try moving the device to a different location or contacting customer support for assistance.
- Q: How can I troubleshoot common issues with the device?
- A: Refer to the troubleshooting section in the user manual for step-by-step instructions on resolving common problems.
Apperance
Function keys
- Switch Key: Long Press switch
- Phe kes Pya/pause music,” Key to play the previous
- The plus key: Click the music Press and hold the “+” button to increase the volume.
- The Minus Key: Click the “” key to play the next music, Long Press “” button to reduce the volume
- Light Button: click light build to adjust light mode Time Key: click the time key to enter the time adjustment page, click the play key to select [ time/minutes ] adjustment, key plus time, long press t., long press “+” key to reduce time, click the time key to determine!
Product parameters
- Product model: BHSG-02
- Charging interface: Type-C
- Input: DC5V/1A
- Power: 10W
- Built-in battery: 2000mAh
- Charging duration: 2-3 hours
- Duration: 3-8 hours
- Light mode: 7 adjustable
- Motor type: reduction motor
- Product size: height 24 * maximum diameter 11CM
matters needing attention
- Do not disassemble, repair or transform by yourself.
- Avoid direct light or heating appliances
- Do not hit the host seriously
- Discarded packaging, batteries, etc. should be classified and properly handled. Please do not approach the strong magnetic field
- Do not touch chemicals such as benzene and thinner
- The battery shall not be exposed to the environment such as sunshine, fire or similar overheating
- Replacement with the wrong type of battery may cause an explosion. Be sure to dispose of the used battery according to the instructions
- If consumers use a power adapter for power supply, they shall purchase a supporting power adapter that has obtained CCC certification and meets the standard requirements
Product warranty card
Dear users,
In order to protect your rights and interests and provide you with better
after-sales service, please fill in this card carefully and keep it when you
purchase the product. Please show it together with the purchase invoice when
performing warranty service!
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used under the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. Suppose this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on. In that case, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.