zelmer ZBS1012 Bathroom Scale User Manual

zelmer ZBS1012 Bathroom Scale

Product Information

The ZBS1012 is a bathroom scale designed for personal use. It has a maximum weight capacity of 180 kg and provides accurate measurements up to 100 g. The scale features a LCD screen for displaying weight and body composition data. It is equipped with metal electrodes for measuring body composition and operates on batteries.

Product Usage Instructions

1. Ensure that the scale is placed on a flat and stable surface.
2. Open the battery compartment and insert the batteries correctly.
3. Press the SET button to enter the normal weighing mode.
4. Stand on the scale with bare feet, ensuring that your feet make contact with the metal electrodes on the surface.
5. Wait for a few seconds while the scale calculates your weight. The weight will be displayed on the screen.
6. To switch to the body composition analyzer mode, press the ,,Up selection button.
7. Enter your personal data such as age and height using the ,,Up and ,,Down selection buttons.
8. Press SET to confirm the configured values for your user profile.
9. Stand on the scale again with bare feet to calculate your body composition. It will display values such as BMI, fat percentage, water percentage, muscle mass, bone mass, and calories.
10. Remain on the scale until the composition calculation is complete.
11. The results will be displayed twice, and then the scale will turn off automatically.

Please note that this product should be used according to the safety instructions provided in the user manual. If you encounter any issues or errors, refer to the troubleshooting section or contact Zelmer’s technical support for assistance.

Cleaning and Disposal
To clean the product, use a soft cloth and mild detergent. Do not immerse the scale in water or use abrasive cleaners. When disposing of the product, comply with local regulations for electronic waste. The scale is marked with a crossed-out waste container symbol, indicating that it should not be disposed of with household waste. Instead, it should be taken to designated collection points for electronic waste.

WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.

DESCRIPTION

1. Scales body
2. LCD screen
3. SET button
4. „Up” selection button ▲
5. „Down” selection button ▼
6. Sensors – metal electrodes
7. Battery compartment

Batteries are not included.

SAFETY INSTRUCTIONS

• This device is intended for domestic use only. It is not intended for commercial use.
• Remove the batteries from the product if you are not going to use it for a prolonged period of time.
• Keep this device out of the reach of children and the handicapped.
• Do not move the device while it is in use.
• Do not exceed the device’s weighing capacity.
• Failure to use the product properly may be hazardous, rendering the guarantee and liability null and void.
• This product may not be used by children.
• Do not store the appliance in an upright position. Do not use the appliance if it is cracked or broken..
  • B&B TRENDS SL accepts no liability for any damage that may be caused to people, animals or objects owing to failure to observe this warning correctly.

IMPORTANT WARNINGS
Ensure that the safety instructions marked the beginning of this manual are followed at all times during use. The scale allows a maximum weight of 180 kg and a precision level of 100 g. Follow the instructions below for the start-up of this device.

INSTRUCTION MANUAL

1. Remove the product from its original packaging, taking special care not to damage any of its parts. Do not use any excessive force to remove the product from the box.
2. Remove the battery cover at the back of the scales.
3. Place the battery in the location indicated under the cover with the positive polarity that is visible at all times. Close the cover again.
4. If the device is not to be used for a prolonged period of time, remove the batteries to prevent acid leaks from the battery.
5. Place the appliance on a horizontal, solid, rigid, flat, stable surface that is free of vibration.
6. If the message “Lo” is displayed, replace the batteries.
7. Prepare the apparatus according to the unit weight. The factory settings use the units “kg” and “cm”. To change the settings to “lb” or to “st:lb”, proceed as follows: Switch on the scale by gently placing your feet on the glass surface. Press the down button until the required unit of weight is shown. The unit of height also changes automatically.

NORMAL WEIGHT MODE

1. Gently place your feet on the surface of the scale to start the device and wait for the symbol “0.0” to appear on the screen.
2. Stand in the centre of the platform and avoid sudden movements, keep still and do not touch other objects until the scale shows your weight. The user must wait while the weight is being calculated. The scale indicates that it has completed the weighing by flashing the final value three times.
3. To save energy, the device goes into sleep mode after several seconds of inactivity.
4. To return to normal operation, simply place your foot lightly on the platform and wait for the symbol “0.0” to appear on the screen.
5. Replace the unit in a safe and stable place.

WEIGHT MODE WITH COMPOSITION INFORMATION

1. This product enables you to obtain information regarding the composition of your weight, indicating the values for body mass index, bone, muscle, water, etc.
2. A user must first be configured in order to obtain this information. This product has a memory capacity for up to 10 users. This memory stores data on the gender, age and height of the person, but not the measurements made with the product.
3. Press the SET button to configure a user. The corresponding user numer will flash on the display. To change user number use the up/down buttons. Select the user confirming with SET button.
4. Then the icon to select the corresponding gender of the user will flash. To change user gender use the up/down buttons. Press SET again to confirm (X – woman, Y – man).
5. Then the text AGE will start to flash and you can select the required age. To select user age use the up/down buttons. Press SET again to confirm.
6. Finally you must select the corresponding height using the up/down buttons and indicate the height of the user in cm. Press SET to confirm and the configured values for this user will appear on the display. If you need to make any changes proceed in the same way as to create the user.
7. Once the user is stored in the memory of the scale with gender, age and height parameters, you must turn on the product by pressing the SET buton and scrolling through the memories using the up / down buttons to the selected user to proceed to the reading. All data on gender, age and height are displayed on the screen and then “0.0” will be shown indicating that you can now start the weighing process.
8. Gently place your bare feet on the surface of the scale. You should ensure that your feet are in contact with the metal electrodes of the Product urface.
9. Avoid sudden movements, keep still and do not touch other objects until the scale displays a stable weight.
10. It will then proceed to calculate the composition of your weight, which takes a few seconds. The values of BMI, fat (FAT), water (TBW), muscle (MUS), bone (BONE), Kcal will be displayed on screen after this calculation. Calories are shown on screen referring to the basal metabolic rate, i.e. the number of daily calories needed to maintain the basic functions of your body.
11. Get off the device only after the calculation of the composition has been completed.
12. The data will be displayed twice and then the scale will turn off.

Guideline values for body fat and water content as a percentage (approximate figures):

VALUES FOR MEN IN DIFFERENT AGE RANGES

AGE:| 10-20| 21-42| 43-65| 66-80
UNDERFAT:| <15%| <17%| <18%| <19%
HEALTHY:| [15, 21)| [17, 23)| [18, 24)| [19, 25)
OVERFAT:| [21, 26)| [23, 28)| [24, 29)| [25, 30)
OBESE:| >=26| >=28| >=29| >=30
VALUES FOR VOMEN IN DIFFERENT AGE RANGES

AGE:| 10-20| 21-42| 43-65| 66-80
UNDERFAT:| <18%| <20| <21| <22
HEALTHY:| (18, 28)| [20, 30)| [21, 31)| [22, 32)
OVERFAT:| [28, 33)| [30, 35)| [31, 36)| [32, 37)
OBESE:| >=33| >=35| >=36| >=37

The values given are indicative and may vary depending on individual factors. It is always worth consulting a doctor or specialist in order to accurately assess the body fat and water content.

CONTRAINDICATIONS
This product is for domestic use only and not intended for professional use. Children should be supervised by an adult in order to prevent the device being used as a toy. This appliance is not intended for use by persons (including children) with any reduced physical, sensory or mental capacities, or who do not the sufficient experience and knowledge necessary, unless they are supervised by a person responsible for their safety.

REPAIRS
Only specialized personnel may carry out repairs on electrical devices. Any incorrectly performed repair may lead to considerable danger to users. Please contact after-sales service for any repairs. Failure to follow the instructions entail the total loss of the product guarantee.

TROUBLESHOOTING GUIDE

press on it with your feet until “0.0” is shown on the display.

Check that the batteries are inserted correctly, making sure the polarity is correct.

The device is damaged| Contact the Zelmer technical service
Error messages “EEEE”| Overload| This means that the maximum weight is exceeded.
Error messages „Err2“| Unable to read| Step on the scale with bare feet

Possible operational problems

PRODUCT CLEANING
This product can only be cleaned by hand using a soft cloth moistened with mild soap. No abrasive cleaning products, abrasive brushes, solvents, benzene, thinner or alcohol may be used to clean the device under any circumstances. Do not immerse the appliance in water to clean it or excessively wet it. Do not reuse the device until it is completely dry.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), establishing the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin. Bring it to your nearest electrical and electronic waste collection point.. The product may contain batteries. Remove them before disposing of the product and dispose in special containers approved for this purpose.

WARRANTY REPORT
B&B TRENDS, S.L. guarantees compliance of this product for the use for which it is intended for a period of two years. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfill or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendationsspecified in this manual for both cases, and has not been tampered with by any third party that is not authorised by B&B TRENDS, S.L. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY
Customers must contact a B&B TRENDS, S.L. authorised Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by B&B TRENDS, S.L., or the careless or improper use of the same shall render this warranty null and void. The warranty must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this warranty.

This warranty should be retained by the user as well as the invoice, receipt or the delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at www.zelmer.com

SERIES: ZBS. MOD: ZBS1012 Max. 180kg/100g (397lb/0,11lb) 2×1,5V AAA (3VDC)
TYPE : PT-737

Made in China  B&B TRENDS, S.L.

WWW.ZELMER.COM

References

• Zelmer - Zelmer's official website
• Zelmer - Oficjalna strona marki Zelmer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>