VISUAL COMFORT IG KS3616BLSL Desk Lamp Instruction Manual
- June 13, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT IG KS3616BLSL Desk Lamp
Product Information
- Product Name: Albie Small Desk Lamp
- Item Number: KS 3616
- Includes: Lamp base, socket, harp, finial, shade, light bulb (not included), protective plug cover
- Product Dimensions: Not specified
- Weight: Not specified
Product Usage Instructions
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Remove the socket ring from the socket.
- Attach the harp to the socket and secure it with the socket ring.
- Remove the finial from the harp.
- Take the shade out of the packaging and install it onto the harp using the finial. If there is additional packaging inside the shade, carefully cut it off to avoid any damages.
- Insert a light bulb into the socket.
- Remove the protective cover from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure it is functioning properly.
Care Instructions
To clean the lamp, use only a soft dry cloth or feather duster.
Do not use abrasive or chemical agents.
Note: This light fixture should be installed in accordance with all applicable local installation codes and by a person familiarwith its construction and operation, as well as the hazards involved. Inspect the item and contents carefully before installation. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
This product is listed and approved for use in the United States.
Albie Small Desk Lamp
Item # KS 3616
ASSEMBLY INSTRUCTIONS
NOTICE:
This light fixture should be installed in accordance with all applicable,local
installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED)
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Remove socket ring (D) from socket (E).
-
Install harp (C) to socket (E) and secure with socket ring (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages -
Install light bulb into the socket.
-
Remove protective cover (F) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.