JetScrub Pet Emptying the dirty water tank | Support

• Turn off and unplug machine

  • Remove dirty water tank by pressing down on recessed button on top of tank

  • Grasp top of tank in recessed area on each side and pull up to remove

  • Empty dirty water tank, rinse it out, and set it aside to dry

  • Remove filter from front of float stack

  • Clear filter of debris and hand wash it in warm water

  • Rinse float

    • Make sure float moves up and down smoothly

  • Allow float, filter, and dirty tank to dry completely

  • Put filter back into float stack and place top piece and float stack back into dirty water tank

  • Put dirty water tank back in machine

    • Insert the bottom first
    • Push the top back into machine until it clicks

  • Tank should not be loose and there should be no gaps

  • Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>