niceboy 200W Party Boss 2 Speaker User Manual

: June 13, 2024
: niceboy

Table of Contents

niceboy 200W Party Boss 2 Speaker
Product Information
Product Usage Instructions
POWER SUPPLY AND CHARGING
SWITCHING ON
PRODUCT DESCRIPTION
TOP PANEL
REMOTE CONTROL
PACKAGE CONTENTS
SPECIFICATION
SAFETY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

niceboy 200W Party Boss 2 Speaker

Product Information

Product Name: PARTY BOSS 2 200W
Product Type: Party Speaker
Power Supply: AC 100-240V/50-60Hz
Languages: CZ, SK, EN

Product Usage Instructions

Remote Control

Before using the controller, open the bottom cover and insert the included AAA batteries.

Mute: Option to mute in any mode.
Previous track

BT Mode

After switching on, the speaker is automatically in BT mode. In
case the speaker is in other mode, switch to BT mode.

AUX Mode

Turn off the speaker.
Insert a 3.5mm jack cable into the INPUT audio input (3).
Turn on the speaker and briefly press the MODE button (14) to switch to AUX mode. AUX mode is indicated on the display by the inscription LINE.
Use the device you connected the speaker to control the music being played.
Control the volume of the speaker with the VOLUME wheel (8) on the top panel.

USB Mode

Connect a USB disk to the USB socket (5). The speaker automatically switches to USB mode.
Start or pause the song by briefly pressing the PLAY button (13).
Control the volume with the VOLUME wheel (8) on the top panel.
Press the NEXT and PREV buttons (13) to go to the next or previous track.
The device supports data carriers with a maximum capacity of 32GB and audio formats MP3 and WAV.
The USB socket can also be used as an output power supply. The speaker fulfills the function of a power bank.

SD Card Mode

Connect an SD card to the TF CARD slot (5). The speaker automatically switches to SD card mode.
Start or pause the song by briefly pressing the PLAY button (13).
Control the volume with the VOLUME wheel (8) on the top panel.
Press the NEXT and PREV buttons (13) to go to the next or previous track.
The device supports data carriers with a maximum capacity of 32GB and audio formats MP3 and WAV.

FM Radio Mode

Place the speaker in an open area so that the radio signal strength is sufficient. The speaker is equipped with an integrated antenna.

Press the MODE button (14) to search for the FM radio mode. The display will show the FM station number, e.g. 90.3.
Briefly press the PLAY button (13) to start scanning available stations. The device will save the found stations to the default channels automatically.
Switch between FM stations with the NEXT and PREV buttons (13) or using the number buttons on the remote control.

TWS Mode

Using True Wireless (TWS) technology, you can connect two Niceboy PARTY Boss 2 200W speakers and play music at the same time.

Turn on both speakers and make sure they are not connected to any Bluetooth device.
Press and hold the TWS button (13) for 3 seconds on the control panel of one of the speakers to pair with the other speaker. “tUS” will appear on the display and a tone will be heard from the main speaker and the second speaker after successful pairing.
Open Bluetooth settings on your device and select “Niceboy PARTY Boss 2 200W” from the list of available devices. A successful pairing will be announced by an acoustic prompt.
When you turn off or change the playback mode, the speakers will automatically disconnect from each other.

POWER SUPPLY AND CHARGING

Plug the supplied cable into the socket (4) on the rear panel of the speaker.
If the speaker is connected to the network, the built-in battery will start charging.
Battery charging is indicated by a light on the display (16).

SWITCHING ON

Turn the main volume wheel on the top panel (8) all the way to the left.
Connect all input devices and instruments you will be using.
Turn on the speaker with the switch on the top panel (6). The speaker is now located in BT mode. After switching to the mode you will use, you can slowly increase the volume.

PRODUCT DESCRIPTION

TOP PANEL

LED ON/OFF button
Microphone inputs
3.5mm AUX input
Charging port
USB/SD input ports
Power button
Microphone volume
Master volume
Light: Short press to change the lighting mode (LED 1 to LED 10) and turn off the light.
REC- Record your sound through the microphone to a USB flash / Micro SD card.
Echo- / Echo+: use these buttons to set the microphone echo effect.
Repeat: Repeats a single track or plays a track from a USB / Micro SD storage in a loop.
Play / Pause button: Press this button to pause or resume audio playback in USB / SD and Blue-tooth mode.
TWS: Long press in Bluetooth mode to activate wireless stereo mode of two Niceboy PARTY Boss 2 speakers.
Previous / Next buttons: During USB / SD and Bluetooth playback, use these buttons to go to the previous or next track.
MODE button: Press to switch between input modes: Bluetooth, USB / SD / FM and AUX input. Long press the “MODE” button to mute the voice prompt. („U-OFF“: voice prompt off; „U-ON“: voice prompt on)
BLUE: Switch directly to Bluetooth mode.
LED display (on the front of the unit)
Mega bass: This button boosts low frequencies to increase bass response.
Menu Button: Press to access Bass (-07~07), Treble (-07~07), EQ (EQ01-EQ06) and Microphone Volume controls.
- Press the “MENU” button, the LED display will show “B / T / V / EQ”:
- „B“ stands for bass control. When you see „B“ and turn the main Volume +/- knob, the BASS effect can be adjusted from „-07“ to „07“
- T“ stands for treble control: when you see „T“ and turn the main Volume +/- knob, the treble /mid-treble frequencies can be adjusted from „-07“ to „07“.
- „V“ means volume, the volume can be adjusted from „0“ to „60“.
- „EQ“ stands for Equalizer: EQ01-EQ06

REMOTE CONTROL

Before using the controller, open the bottom cover and insert the included AAA batteries.

Mute: Option to mute in any mode.
Previous track
- In USB/TF (Micro SD card) mode – previous track.
- In Bluetooth connection mode – previous track.
- In FM mode – Previous channel.
MODE: Short press to go to Bluetooth / AUX / USB / SD mode.
Long press to mute the voice prompt
Recording function: In USB / SD mode, press „REC“ button to record songs to USB / Micro SD card.
Echo – Reduction of the echo effect.
BASS + / – Adjust the bass effect.
EQ function – EQ1 – Normal, EQ2- Rock, EQ3- Fashion, EQ4- Classic, EQ5- Country, EQ6- Jazz
Microphone volume + / –
POWER
Pause / Play
Next track
- In USB / SD mode – next track
- In BT mode – next track
- In FM mode – next channel
Light mode switch: Short press to change the lighting mode (LED 1 to LED 10) and turn off the light.
REPEAT: Repeat playback of a single song or a loop of a song on USB / SD storage.
Playback of recording
Deletion of Record
Echo + Increase the echo effect.
Microphone Priority – If the button is on, it prioritizes the microphone by muting the music when speaking into the microphone. When this switch is off, the volume of the played music remains unchanged.
Treble + / – Setting the treble effect.
Master volume
Number buttons
- In USB/TF (Micro SD card) mode to select songs.
- In FM mode to select automatically stored stations.

BT MODE

After switching on, the speaker is automatically in BT mode. In case the speaker is in other mode, it is necessary to put it in bluetooth mode by briefly pressing the MODE button (14). The BT pai-ring mode is indicated on the display by a flashing BLUE sign.
Activate Bluetooth on your device. Then select „Niceboy PARTY Boss 2 200W“ in the list of availab-le devices.
The device connects to the speaker. Successful pairing will be announced by an acoustic prompt and on the display the inscription BLUE lights up permanently.
After powering on again, the speaker will automatically connect to the last paired one device.

AUX MODE

The speaker must be turned off.
Insert 3.5mm jack cable into the INPUT audio input (3).
Turn on the speaker and then briefly press the MODE button (14) to switch to AUX mode.
AUX mode is indicated on the display by the inscription LINE.
Use the device you connected the speaker to to control the music being played.
You can control the volume of the speaker with the VOLUME wheel (8) on the top panel.

USB MODE

After connecting the USB disk to the USB socket (5), the speaker automatically switches to the appropriate mode. This is indicated on the display by the inscription USB.
Start or pause the song by briefly pressing the PLAY button (13). You control the volume with the VOLUME wheel (8) on the top panel. By briefly pressing the NEXT buttons and PREV (13) to go to the next or previous track. The device supports data carriers with a maximum capacity of 32GB and audio formats MP3 and WAV. The USB socket can also be used as an output power supply. The speaker thus fulfills the function of a power bank.

SD CARD MODE

After connecting the SD card to the TF CARD slot (5), the speaker automatically switches to the appropriate mode. This is indicated on the display by the inscription SD.
Start or pause the song by briefly pressing the PLAY button (13). You control the volume with the VOLUME wheel (8) on the top panel. By briefly pressing the NEXT buttons and PREV (13) to go to the next or previous track. The device supports data carriers with a maximum capacity of 32GB and audio formats MP3 and WAV.

FM RADIO MODE
Place the speaker in an open area so that the radio signal strength is sufficient. The speaker is equipped with an integrated antenna.

Search for the FM radio mode by briefly pressing the MODE button (14). This is indicated on the display FM station number, e.g. 90.3.
Briefly press the PLAY button (13) to start scanning available stations. The device automatically saves the found stations to the default channels.
After scanning is complete, you can switch between FM stations with the NEXT and PREV buttons (13), or using the number buttons on the remote control.

TWS MODE:
Using True Wireless (TWS) technology, you can connect two Niceboy PARTY Boss 2 200W speakers and play music at the same time.

Turn on both speakers and make sure they are not connected to any Bluetooth device (mobile phone, laptop, etc.).
Press and hold the TWS button (13) for 3 seconds on the control panel of one of the speakers to pair with the other speaker. „tUS“ will appear on the display. A tone will be heard from the main speaker and the second speaker after successful pairing.
Open Bluetooth settings on your device. Then select „Niceboy PARTY Boss 2 200W“ from the list of available devices. A successful pairing will be announced by an acoustic prompt. When you turn off or change the playback mode, the speakers will automatically disconnect from each other.

WIRELESS MICROPHONE
Unscrew the bottom cover of the microphone and insert the included AA batteries. Screw the cap back on a switch on the top of the microphone to turn it on. The microphone will automatically connect to the powered speaker. Use the MIC wheel to adjust the microphone volume. VOL. (7) You control the echo effect by briefly pressing the ECHO+, ECHO- buttons

RECORDING
When connecting a wireless or wired microphone or a musical instrument via the microphone inputs can record vocals / musical instruments to a USB disk or SD memory card. The storage media must contain at least one audio file in mp3 or wav format to be detected by the device.

Turn off the speaker and connect other instruments to the MIC.IN or GT.IN inputs.
Turn on the speaker.
Insert the USB disk or SD card into the respective USB or TF CARD slots.
The speaker will switch to the appropriate storage media mode.
Press the REC button briefly to start recording your audio track. Recording is indicated on the display by REC.
End recording by long pressing the REC button.

PACKAGE CONTENTS

Speaker Niceboy PARTY Boss 2 200W Mains power cable
Wireless microphone
Remote control
2x AA batteries
2x AAA batteries
Instructions for use

SPECIFICATION

BT version: 5.0
Frequency band: 2.4GHz
Radio frequency power: ≤ 2.5 mW
RMS power: 200 W
Power supply: 100V-240V, 60/50 Hz
Battery: 4.5Ah 12V
Charging time: 4 hours
Durability: 8 hours
Woofer: 2 x 8”
Frequency range: 50 Hz – 18 kHz
Impedance: 4Ω, ±10%
Sensitivity: 88 db, ±2 dB
Tweeter: 1 x 2”
Frequency range: 3 kHz – 18 kHz
Impedance: 8Ω, ±15%
Sensitivity: 85 dB, ±3 dB
Microphone: wireless, directional
Frequency: 40 Hz – 15 kHz
Impedance: 10 kΩ / 1 kHz
Sensitivity: 5 dB

SAFETY INFORMATION

Listening to music at excessive volume can damage your hearing. Do not subject the equipment to fluids and moisture. Do not expose the device to excessively high/low temperatures, and do not attempt to disassemble it. Protect the device from sharp objects and falls from height. Batteries – Improper handling (prolonged charging, short circuit, breakage by other objects, etc.) may result in fire, overheating or battery leakage. The battery or accumulator that may be included with the product has a life of six months because it is a consumable item. Information on all frequency bands in which the radio equipment operates and intentionally transmits radio waves as well as the maximum radio frequency power transmitted in the frequency band in which the radio equipment is operated is included in the instructions and safety information.

NICEBOY s.r.o. hereby declares that the type of radio equipment NICEBOY PARTY BOSS 2 200W complies with Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU Declaration of Conformity is available on the following websites: https://niceboy.eu/en/declaration/party- boss-2-200w

USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)

This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According
to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly. User information for disposing electrical and electronic devices. (Business and corporate use) In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product’s manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronicdevice on the market, they will tell you who is responsible for financing the disposal of thiselectrical or electronic device. Information regarding disposal processes in other countriesoutside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.