APPECK C5103-C Permanent Outdoor Lights Instruction Manual

APPECK C5103-C Permanent Outdoor Lights Instruction Manual

Thank you for choosing the C5103-C. In order to optimize the user experience, please read this manual carefully before operation, and keep this manual properly for future use

Warning:

1. This product is not a toy. To avoid fire, burns, personal injury or electric shock, please install out of the reach of
2. In order to ensure the normal operation of the lamp, please use the voltage indicated on the
3. Please do not modify the lamps during the warranty
4. Do not install near gas or electric heaters, fires, candles or any dangerous
5. Before installation, please check whether the lamps and various parts are in good
6. Be sure to cut off the power before
7. Do not expose the lamp to corrosive
8. If the power cord is damaged, please cut off the power immediately and stop using.

Technical Specification:

Connection method: 2.4G Wifi&Bluetooth Control method: APP/Voice/Button Adapter input voltage:100-240VAC Adapter output voltage: 24VDC/1.5A Rated working voltage: DC24V
Rated power: 36W Lamp color: RGB Memory function:yes
Working temperature:-20℃~+40℃
Work with Amazon Alexa and Google Assistant

Packing list:

1. Permanent outdoor lights* 1
2. Infrared remote controller * 1
3. Class 2 power supply * 1
4. Install the clip * 36
5. Mounting screws * 36
6. C015 controller * 1
7. Copy of the manual * 1
8. Service card * 1

Product size information:

Manual of Controller:

Button Instruction:

Switch : Short press is on/off. When the device is on, long press in 5 second is reset to pairing mode. Light will blink in red

Installation Method:

APP Intelligent operation introduction:

Pairing Instruction:

1. APP Download. Search the Smart Life from Google Play or App Store. You can also scan the QR code from below.
   Download the APP and Log In with existing account or Sign Up the new account

2. Turn on the power of the device, turn on the Bluetooth and Wi-Fi of the mobile phone, and make sure that the mobile phone is in the 2.4G network state. Press and hold the key for about 3-5 seconds until the light bar is in the red flashing state.

3. Tap Add Device or the plus icon (+) in the top-right corner on the Home page to go to the device adding page.

4. Enter the Wi-Fi password and click Next. Make sure the Wi-Fi is 2.4GHz not the 5GHz. Because the Wi-Fi chip is 2.4GHz. Wait about twenty seconds and the device will be added.

5. Then the device can be found in home Now you can play it with your imagination.

6. Click the edit icon in the upper right corner to show more gameplay

Notice:

1. Please make sure to perform network pairing in 4G wifi or hotspot mode;
2. If the connection times out or the network connection cannot be reached, please reconnect to a strong signal location;

Bluetooth control steps

Note: The device has already joined my app normally (2.4GWIFI+Blue- tooth is required for the first connection),Bluetooth control is generally used for devices with poor WIFI signals or disconnected network connections;

1. Turn off the phone’s WiFi;
2. Turn on Bluetooth and open the device on the APP; Then the device can be controlled through Bluetooth;

Common problems and solutions:

1. Unable to connect to your Wi-Fi

(1). Please ensure that the correct Wi Fi password is entered during use. (2). Ensure that the connection is 2.4G wifi and that the device currently does not support 5G wifi,
(3). Check if there are any issues with your internet connection. If the Wi Fi signal is too weak, please move to a place with a strong signal or reset the wireless router and try again.

2. The installer is not working

• Then close all applications running in the background and reopen the Smart Life
• Uninstall and reinstall the Smart Life app and

3. The smart string light is not

• Check whether the smart string light is turned If yes, turn them on and wait until the smart light strip reconnects to The wireless network works automatically.
• Check if there is any problem with your internet If neces- sary, reset the wireless router and try again.

Guarantee:

1. During the warranty period, we provide services including refunds or free replacement for those who use the device for its intended
2. This warranty does not include:

• Malfunction or damage caused by improper use, repair or
• Failure or damage due to
• Failure or damage caused by fire, earthquake, flood, lightning and other natural
• Malfunction or damage when used other than for its intended
• Failure or damage caused by third-party
• Failure or damage to the product caused by human

FCC Warning:

This device complies with part 15 of the FCC Rules. Operation is subjectto the following two conditions:

• This device may not cause harmful interference
• this device must accept any interference received, including interfer- ence that may cause undesired

Note : This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following.

Measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifi- cations could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

MADE IN CHINA

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>