SHARGEEK SHARGE-SP035 Starship Seer User Manual
- June 12, 2024
- SHARGEEK
Table of Contents
SHARGEEK SHARGE-SP035 Starship Seer
Product information
- Product Name: Starship Seer
- Item model number: SP035
- Port type: USB-Cx1 USB-Ax1
- USB-C Input: 5V/3A 9V/2A 12V/1.5A 15V/2A
- USB-C Output: 5V/3A 9V/3A 12V/2.9A 15V/2.3A 20V/1.75A
- USB-A Output: 5V/3A 9V/2A 12V/1.5A
- USB-A+USB-C Total Output: 5V/4A
- Battery Energy: 10000mAh/9800mAh 36Wh/35.28Wh
- Rated capacity: 5600mAh(5V /3Al
- Dimensions: 90x65x29mm/3.54×2.56×1.14 in
- Product weight: 2229/7.83 oz
- Battery Type: 21700 Lithium-ion battery cell
- Conversion Efficiency: 70%
Switch machine
- Power on: Long press the button to power on
- Power off: After powering on, press the button three times to power off on the time interface.
Set up
Clock mode
Press and hold the button to turn on. The interface now is the clock mode
interface.
Time setting
Long press the button to enter the time setting mode, click the button to
adjust each item, long press to enter the next item, until the second item is
set, the clock begins to run.
Alarm clock setting
After the clock setting is completed, the alarm clock icon light will flash.
Press and hold the button. The alarm clock icon light will stay on. Then click
the button to set AM/PM, hour, and minute, and then long press to enter the
next item.
Turn off the alarm clock
After the alarm clock buzzes, click the button to turn off the alarm clock
buzzer. If the buzzer is not operated and continues to work for 30 seconds, it
will automatically shut off.
Power mode
Long press the button to turn on, and enter the time display interface. Short
press the button again to switch to power mode. The interface displays real-
time input and output power and remaining charging time.ly shut off.
Product performance failure table
| Product Name | Failure |
|---|
Starship Seer
| 1. Shell cracks due to structural or material factors .
2. The plug is loose and cannot be inserted into the socket.
3. Inability to charge electronic devices.
Non-Warranty Regulation
- Unauthorized repair, misuse, collision, neglect, abuse, fluid ingress, accident, alteration, improper use of accessories.
- The validity period of the three packs has exceeded.
- Damage caused by force majeure.
- The performance failures listed in the “Product Performance Failure Table” are not met.
- This product has performance failures listed in the “Product Performance Failure Table” due to human reasons.
Battery level description
The remaining power is displayed as a numerical percentage.
Algorithm description
Remaining power
The percentage of remaining power is calculated based on battery coulomb
calculation (the internal percentage of the power chip minus the percentage of
clock power consumption).
Remaining charging time
The remaining time (the REMlN icon is on) is measured based on the coulomb
counter and the current input/output power calculation, and the clock power
consumption is not included in the calculated range. For example, if the load
is not connected after clicking Bright Screen, the estimated time will display
“99:99″_ At this time, after connecting to a 17W load, the estimated time will
display “02:00”, which means that the current battery life is 2 hours. The
charging conditions are analogous in turn.
Use environment
- Ambient temperature for use: 0°C-35°C in non-tropical areas below 2000M altitude.
- Storage ambient temperature: -20°C-40°C.
- Indicates that the device is intended for use in non-tropical areas only.
- Indicates that the device is only suitable for use in areas below 2000M altitude.
- Indicates that the device is intended for indoor use only.
- Avoid using electrical appliances or loads that exceed the output current of this product (the circuit will be protected, no output).
Precautions
Please read all instructions and warnings before using this product. Improper use will damage the product or personal safety.
-
Do not store this product in high temperature, strong light and strong magnetic field environments, and do not place it in other harsh environments such as fire sources.Allow to dry naturally before use. This form is prepared according to the provisions of SJ/T 11364.
-
Improper use of the product may easily damage the product itself or endanger personal and property safety.
Consumers will bear all the consequences themselves if they violate the product manual and use the product improperly, causing personal and property damage.The company will not bear any legal responsibility. -
Non-professionals are strictly prohibited from disassembling this product.
-
Avoid strong physical effects, including knocking, overdrawing, trampling, squeezing, etc.
Declaration of Toxic and Hazardous Substances in Electronic Information Products
Part
Name
| Toxic and hazardous substances and elements
---|---
Pb
| ****
Hg
| ****
Cd
| ****
Cr6+
| ****
PBB
| ****
PBDE
PCB| | 0| 0| 0| 0| 0
Plastics| 0| 0| 0| 0| 0| 0
Metals| | 0| 0| 0| 0| 0
Components| 0| 0| 0| 0| 0| 0
This form is prepared according to the provisions of SJ/T 11364.
- indicates that the content of this toxic and hazardous substance in all homage neous materials of this part is below the limit requirement specified in GB/T 26572 standard.
- Indicates that the cuitent of this toxic and hazardous subetance in at least one homogeneous material of this part exceede the limit requirement specified in the GB/T 26572 standard.
- The information in this form is the data provided to the supplier and the test results that meet the RoHS environmental protection requirements.
