AUDAC NCP105 Universal Network PoE Wall Panel Controller Instruction Manual

AUDAC NCP105 Universal Network PoE Wall Panel Controller

Product Information

The NCP105 is a universal network wall panel controller designed for audio control. It features 4 programmable capacitive touch buttons and a programmable rotary encoder. Each button is equipped with an RGB indicator LED, and the RGB LED ring provides user feedback on selected settings or audio levels. The NCP105 utilizes IP-based communication, making it future-proof and compatible with existing products. Its front panel is made of high-quality fingerprint-resistant glass and includes a name tag window for each button, allowing for custom name tags to be added.

Product Usage Instructions

Connections and connectors

• Refer to the hardware manual for detailed instructions on connecting the NCP105 to your audio system.

Network settings

• Configure the network settings of the NCP105 according to your network setup. Refer to the hardware manual for step-by-step instructions.

Overview front panel

• Familiarize yourself with the layout and features of the front panel of the NCP105. Refer to the hardware manual for a detailed description.

Front panel description

• Understand the functions of each button, the rotary encoder, and the RGB indicator LEDs on the front panel. Refer to the hardware manual for a comprehensive explanation.

Overview rear panel

• Take note of the connectors and features located on the rear panel of the NCP105. Consult the hardware manual for a visual representation and detailed information.

Rear panel description

• Learn about the purpose and usage of each connector on the rear panel of the NCP105. Refer to the hardware manual for a thorough explanation.

Placing the name tag

• Add custom name tags behind the name tag windows on the front panel of the NCP105 for a clear overview and identification of configured functions. Follow the instructions in the hardware manual for proper placement.

Installation

• Mount and install the NCP105 according to the provided guidelines in the hardware manual.

Removing the front cover

• If necessary, remove the front cover of the NCP105 for maintenance or customization purposes. Follow the instructions in the hardware manual for safe removal.

Quick start guide

• Refer to the quick start guide in the hardware manual for a concise overview of the initial setup and basic operation of the NCP105.

Technical specifications

• For detailed technical specifications, consult the dedicated section in the hardware manual.

Introduction

Universal network/PoE wall panel controller

• The NCP105 is a universal network wall panel controller, with 4 programmable capacitive touch buttons and a programmable rotary encoder. Each button is provided with an RGB indicator LED, while the RGB LED ring gives the user feedback on the selected settings or audio level.
• The IP-based communication makes it future-proof while also being backward compatible with many existing products.
• Besides the elegant design, the front panel of NCP105 is finished with high-quality fingerprint-resistant glass and a name tag window for each button that allows a custom name tag to be added behind the panel, offering a neat finish while having a clear overview of the configured functions.
• The configuration of the button functions and the rotary dial is entirely flexible, with full compatibility of all AUDAC Touch functionalities.
• The NCP105’s design allows it to be used in many applications and with many different AUDAC or third-party AV equipment. From simultaneous multi-device support such as processors, amplifiers, and sources to loudspeakers, the choice is yours.
• The wall panels are compatible with standard EU-style in-wall boxes, making the wall panel the ideal solution for solid and hollow walls. Black and white color options are available to blend into any architectural design.

Precautions

READ THE FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY
• ALWAYS HANDLE THIS UNIT WITH CARE HEED ALL WARNINGS
• FOLLOW ALL INSTRUCTIONS
• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE
• NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS
• DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET. ENSURE THERE IS ADEQUATE VENTILATION TO COOL THE UNIT. DO NOT BLOCK THE VENTILATION OPENINGS.
• DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS.
• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT DO NOT PLACE THIS UNIT IN ENVIRONMENTS THAT CONTAIN HIGH LEVELS OF DUST, HEAT, MOISTURE OR
• VIBRATION THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS
• PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK
• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER
• USE THE APPARATUS ONLY IN MODERATE CLIMATES
• CAUTION – SERVICING
• This product contains no user-serviceable parts. Refer all servicing to qualified service personnel. Do not perform any servicing (unless you are qualified to)

EC DECLARATION OF CONFORMITY

• This product conforms to all the essential requirements and further relevant specifications described in the following directives: 2014/30/EU (EMC) & 2014/35/EU (LVD).

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

• The WEEE marking indicates that this product should not be disposed of with regular household waste at the end of its life cycle. This regulation is created to prevent any possible harm to the environment or human health.
• This product is developed and manufactured with high-quality materials and components that can be recycled and/or reused. Please dispose of this product at your local collection point or recycling center for electrical and electronic waste.
• This will make sure that it will be recycled in an environmentally friendly manner, and will help to protect the environment in which we all live.

Connections

CONNECTION STANDARDS

The in- and output connections for AUDAC audio equipment are performed according to international wiring standards for professional audio equipment.

RJ45 (Network, PoE) Network communications

• Pin 1 White-Orange
• Pin 2 Orange
• Pin 3 White-Green
• Pin 4 Blue
• Pin 5 White-Blue
• Pin 6 Green
• Pin 7 White-Brown
• Pin 8 Brown
• Used for connecting the NCP105 in your Ethernet network with PoE (power over Ethernet).
• The NCP105 complies with the IEEE 802.3 af/at standard, which allows.
• IP telephones, wireless LAN Access Points, Security network cameras, and other IP-based terminals to receive power, in parallel to data, over the existing CAT-5 Ethernet infrastructure without the need to make any modifications in it.
• PoE integrates data and power on the same wires, it keeps the structured cabling safe and does not interfere with concurrent network operation.
• PoE delivers 48v of DC power over unshielded twisted-pair wiring for terminals consuming less than 13 watts of power.
• The maximum output power depends on the power delivered by the network infrastructure. In case the network infrastructure is not capable of delivering sufficient power, use a PoE injector to the NCP 105.
• While CAT5E network cable infrastructure is sufficient for handling the required bandwidth, it is recommended to upgrade the network cabling to CAT6A or better cabling to achieve the best possible thermal and power efficiency throughout the system when drawing higher powers over PoE.

Network settings

STANDARD NETWORK SETTINGS

• DHCP: ON
• IP Address : Depending on the DHCP
• Subnet Mask: 255.255.255.0 (Depending on DHCP)
• Gateway: 192.168.0.253 (Depending on DHCP)
• DNS 1: 8.8.4.4 (Depending on DHCP)
• DNS 2: 8.8.8.8 (Depending on DHCP)

Overview front panel

• The front panel of the NWP series is finished with high-quality fingerprint-resistant glass and a name window for each adjustable button.
• It features 4 adjustable buttons and a push rotary with an RGB LED ring indicator that can be set up for any command quickly, without any coding.

Front panel description

• Programmable Capacitive Touch Buttons & Name Windows
• Any available functionality or up to 10 selectable devices can be assigned to each of the buttons.
• The name tag can be placed behind the name window to indicate the function of the button, the zone it is connected to, or the device it can choose.

Push Rotary with RGB LED

• The push rotary can have multiple functions and the status is indicated by the RGB LED. Any selected function through the 4 programmable buttons can be adjusted using the rotary dial.
• The LED ring can have multiple indication functions depending on the selected button.

Overview rear panel

• The rear of the NCP105 contains an ethernet connection port which is used to connect the wall panel to the RJ45 connector.
• As the NCP105 is a universal network wall control panel with PoE, all data flow and powering are done through this single port.

Rear panel description

Ethernet connection

• The Ethernet connection is the essential connection for the NCP105.
• Control signals and power (PoE) are distributed over the Ethernet network.
• This input shall be connected to your network infrastructure.

Placing the name tag

• Custom name tags can be placed after removing the front cover of the NCP105.

Step 1:

Step 2:

Step 3:

Installation

• This chapter guides you through the setup process for a basic setup where an NCP105 networked wall panel should be connected to a system with a wired network.
• The wall panels are compatible with standard EU-style in-wall boxes, making the wall panel the ideal solution for solid and hollow walls.
• Provide a twisted pair cable (CAT5E or better) from the network switch to the wall panel.
• The maximum safest distance between the PoE switch and the wall panel should be 100 meters.

Removing the front cover

• The front panel of the NCP105 can be removed by using a flat-head screwdriver in 5 steps.

Quick start guide

• This chapter guides you through the setup process for an NCP105 universal network/PoE wall panel controller connected to the network. The control of the system is done through the NCP105 or Audac TouchTM.

Connecting the NCP105

• Capacitive touch buttons calibrate themselves at the boot. To get an accurate capacitive touch button sensitivity, boot the device while the top cover is mounted to it. To boot your NCP105 universal network/PoE wall panel controller, first, connect the Cat5E (or better) network cable to your wall panel controller, install it, and mount the top cover. Then connect the other end of that network cable to a PoE-supported Ethernet network switch. If the existing Ethernet network switch is not PoE-compatible, an additional PoE injector should be installed in between. The boot and operation of the NCP105 wall panel controller can be monitored via indicator LEDs on the front panel of the unit, which indicate the selected button and status.
• For safety precautions, please make all your connections between the wall panel controller and the PoE network switch while the switch is powered off.

Factory Reset

• Press the push rotary for 30 seconds. Once the RGB LED indicator starts blinking, remove the network cable from the device within 1 minute. Replug the network cable, the device will be in factory defaults after repowering.

Configuring the NCP105

• NCP105 universal network/PoE wall panel controller can be configured using the Audac TouchTM platform, which can be freely downloaded and operated from various platforms.
• This is very intuitive to operate and automatically discovers all available compatible products in your network. With available functions, many different AUDAC or third-party AV equipment can be controlled with ease.

Technical specifications

ADDITIONAL INFORMATION

• This manual is put together with much care and is as complete as could be on the publication date.
• However, updates on the specifications, functionality, or software may have occurred since publication.
• To obtain the latest version of both manual and software, please visit the Audac website @ audac.eu.

Discover more onaudac.eu

References

• Inspiring sound solutions | AUDAC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>